[Mon Aug 20 23:50:13 2012] Detection parameters:
  Position = (328.9, 325.5) = 22 41 49.38 17 33 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.2 +/- 19.0
  Background counts = 8.6
  Rate = 0.02 +/- 0.003

[Mon Aug 20 23:50:14 2012] Off-axis axis estimate = 2.95'
[Tue Aug 21 00:53:46 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 00:53:46 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Tue Aug 21 00:53:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.931
[Tue Aug 21 00:53:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.90"
[Tue Aug 21 02:12:13 2012] fullrun_mos1_xmm0650384701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 02:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384701_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 02:12:13 2012] fullrun_mos1_xmm0650384701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 02:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384701_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 02:12:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650384701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650384701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 02:12:13 2012] fullrun_mos1_xmm0650384701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 02:12:13 2012] fullrun_mos1_xmm0650384701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 02:12:13 2012] Fit fullrun_mos1_xmm0650384701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 21 03:22:31 2012] Source 3 is offset by 0.052998 and -1.045182 pixels which is larger than
2 X fitted extent = 0.908506 x 0.908506, not incorporating fit results
[Tue Aug 21 03:22:31 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:22:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:22:31 2012] Assessing source extent using major
[Tue Aug 21 03:22:31 2012] Source does appear to be extended
[Tue Aug 21 03:22:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 03:22:31 2012] Source is confused with source 6
[Tue Aug 21 04:36:44 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 04:36:44 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Tue Aug 21 04:36:44 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.931
[Tue Aug 21 04:36:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.90"
[Tue Aug 21 05:31:43 2012] fullrun_mos1_xmm0650384701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 05:31:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384701_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 05:31:43 2012] fullrun_mos1_xmm0650384701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 05:31:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384701_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 05:31:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650384701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650384701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 05:31:43 2012] fullrun_mos1_xmm0650384701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 05:31:43 2012] fullrun_mos1_xmm0650384701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 05:31:43 2012] Fit fullrun_mos1_xmm0650384701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 06:37:38 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Tue Aug 21 06:37:38 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 06:37:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 06:37:38 2012] Assessing source extent using major
[Tue Aug 21 06:37:38 2012] Source does appear to be extended
[Tue Aug 21 06:37:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 08:52:27 2012] XMMSAS src. selection expression = ellipse(28562.260315, 28267.788361, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 08:52:27 2012] Writing source region out to fullrun_mos1_xmm0650384701_pi300-10000_pass1_cl_src3_src.reg
[Tue Aug 21 08:52:27 2012] Extracting stamp from image fullrun_mos1_xmm0650384701_pi300-10000_cl_sm2.00.img.gz, (291, 288) - (366, 363)
[Tue Aug 21 08:52:27 2012] XMMSAS bgd. selection expression = annulus(28562.260315, 28267.788361, 1087.500000, 2175.000000, X, Y) && !ellipse(26758.323600, 27554.808800, 1183.184034, 1183.184034, 0.000000, X, Y) && !ellipse(26842.451813, 27808.930267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26282.861908, 27335.825287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27621.877000, 26600.042000, 1169.808034, 1169.808034, 0.000000, X, Y) && !ellipse(26030.910000, 26361.614800, 1070.048031, 1070.048031, 0.000000, X, Y) && !ellipse(25713.254578, 28160.973877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25522.196014, 27092.027222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.800140, 26264.154572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28760.646759, 27811.059601, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 08:52:27 2012] Writing fullrun_mos1_xmm0650384701_pi300-10000_pass1_cl_src3.gif
[Tue Aug 21 08:52:30 2012] Mean detx,y = (1570.10, 462.79) 
[Tue Aug 21 08:52:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 08:52:40 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 08:52:41 2012] Setting source spectrum file to fullrun_mos1_xmm0650384701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 21 08:52:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650384701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Aug 21 08:55:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 08:55:37 2012] rmf not generated due to insufficient counts
[Tue Aug 21 09:52:51 2012] Updating aperture counts using extracted products
[Tue Aug 21 09:52:52 2012] Error reading totcts from fullrun_mos1_xmm0650384701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 21 09:52:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 09:52:52 2012] Using photon index=1.80, rate=0.0187, arf fullrun_mos1_xmm0650384701_pi300-10000_pass1_cl_src3.arf
[Tue Aug 21 09:52:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 09:52:52 2012] Updating source flux to 1.9e-13
[Tue Aug 21 09:52:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 21 09:53:03 2012] xmm0650384701/analysis//spectral/fullrun_mos1_xmm0650384701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete