[Sun Aug  5 01:21:16 2012] Detection parameters:
  Position = (299.0, 279.1) = 13 22 50.52 31 39 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 895.2 +/- 39.2
  Background counts = 51.7
  Rate = 0.1 +/- 0.004

[Sun Aug  5 01:21:16 2012] Off-axis axis estimate = 1.40'
[Sun Aug  5 01:22:41 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 01:22:41 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Sun Aug  5 01:22:41 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Sun Aug  5 01:22:41 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.13"
[Sun Aug  5 01:58:14 2012] fullrun_pn_xmm0650384601_pi300-10000_cl_pass0_src5.ximg exists
[Sun Aug  5 01:58:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650384601_pi300-10000_cl_pass0_src5.csv
[Sun Aug  5 01:58:14 2012] fullrun_pn_xmm0650384601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Aug  5 01:58:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650384601_pi300-10000_cl_pass0_src5.csv
[Sun Aug  5 01:58:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650384601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650384601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 01:58:14 2012] fullrun_pn_xmm0650384601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Aug  5 01:58:14 2012] fullrun_pn_xmm0650384601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Aug  5 01:58:14 2012] Fit fullrun_pn_xmm0650384601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Aug  5 03:31:09 2012] Spatial fit model total counts = 3499.470000, observed total counts = 3497.000000
[Sun Aug  5 03:31:09 2012] Offset between fit and detection position for source 5 = 1.947517 pixels
[Sun Aug  5 03:31:09 2012] 3485.772000 total counts/ 2693.100000 bgd. counts: snr = 15.274510
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.947517 pixels
  Position = (300.5, 280.3) = 13 22 50.00 31 39 7.7
  Extent = 14.3 (14.2-28.5)", rotation angle = 0
  Source counts = 792.7 +/- 59.0
  Background counts = 2693.1
  Rate = 0.08 +/- 0.006
[Sun Aug  5 03:31:09 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 03:31:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 03:31:09 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 03:31:09 2012] Source does appear to be extended
[Sun Aug  5 03:31:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 03:31:09 2012] Source is confused with source 1
[Sun Aug  5 03:31:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 03:31:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug  5 03:31:23 2012] Initial guess for spatial extent in simple fitting = 14.26"
[Sun Aug  5 03:31:23 2012] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.858
[Sun Aug  5 03:31:23 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.26"
[Sun Aug  5 04:04:46 2012] fullrun_pn_xmm0650384601_pi300-10000_cl_pass1_src5.ximg exists
[Sun Aug  5 04:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650384601_pi300-10000_cl_pass1_src5.csv
[Sun Aug  5 04:04:46 2012] fullrun_pn_xmm0650384601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Aug  5 04:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650384601_pi300-10000_cl_pass1_src5.csv
[Sun Aug  5 04:04:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650384601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650384601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 04:04:47 2012] fullrun_pn_xmm0650384601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Aug  5 04:04:47 2012] fullrun_pn_xmm0650384601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Aug  5 04:04:47 2012] Fit fullrun_pn_xmm0650384601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Aug  5 05:40:39 2012] Spatial fit model total counts = 5276.000000, observed total counts = 5274.000000
[Sun Aug  5 05:40:39 2012] Offset between fit and detection position for source 5 = 2.576021 pixels
[Sun Aug  5 05:40:39 2012] Warning, changing simple spatial fit ID from 5 to 1
[Sun Aug  5 05:40:39 2012] 5286.540000 total counts/ 2777.100000 bgd. counts: snr = 47.619086
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.576021 pixels
  Position = (298.0, 280.4) = 13 22 50.88 31 39 8.3
  Extent = 27.8 (27.8-55.6)", rotation angle = 0
  Source counts = 2509.4 +/- 72.7
  Background counts = 2777.1
  Rate = 0.2 +/- 0.007
[Sun Aug  5 05:40:39 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 05:40:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 05:40:39 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 05:40:39 2012] Source does appear to be extended
[Sun Aug  5 05:40:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 05:40:53 2012] Counts = 2509.440000, rescaling region sizes by 2.000000
[Sun Aug  5 05:40:53 2012] XMMSAS src. selection expression = ellipse(25875.140000, 24350.474000, 3338.016096, 3338.016096, 0.000000, X, Y)
[Sun Aug  5 05:40:53 2012] Writing source region out to fullrun_pn_xmm0650384601_pi300-10000_pass1_cl_src5_src.reg
[Sun Aug  5 05:40:53 2012] Extracting stamp from image fullrun_pn_xmm0650384601_pi300-10000_cl_sm2.00.img.gz, (106, 89) - (490, 472)
[Sun Aug  5 05:40:53 2012] XMMSAS bgd. selection expression = annulus(25875.140000, 24350.474000, 11126.720320, 22253.440640, X, Y) && !ellipse(25353.276000, 24643.694000, 1112.672032, 1112.672032, 0.000000, X, Y) && !ellipse(39503.468781, 14909.738586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.683200, 24390.331860, 2277.024066, 2277.024066, 0.000000, X, Y) && !ellipse(11708.588348, 24815.270569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28190.616000, 20216.645200, 318.154409, 318.154409, 0.000000, X, Y) && !ellipse(25570.127258, 11759.376404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39719.184601, 32059.884399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33149.163269, 30316.778015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17770.626907, 21430.400269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27639.682770, 19875.198273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32018.192474, 16704.997711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37352.701233, 33645.693573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26261.212000, 26516.046000, 1042.472030, 1042.472030, 0.000000, X, Y) && !ellipse(26086.939331, 26034.075043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27386.098267, 25260.970337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19172.350260, 23345.012840, 786.229134, 786.229134, 0.000000, X, Y) && !ellipse(27375.501200, 22944.726000, 1284.088037, 808.264023, 22.352000, X, Y) && !ellipse(27214.347076, 22309.562775, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug  5 05:40:53 2012] Writing fullrun_pn_xmm0650384601_pi300-10000_pass1_cl_src5.gif
[Sun Aug  5 05:53:46 2012] Mean detx,y = (1.46, 367.38) 
[Sun Aug  5 05:53:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 06:03:21 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 06:03:21 2012] Setting source spectrum file to fullrun_pn_xmm0650384601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Aug  5 06:03:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650384601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Aug  6 11:19:42 2012] Updating aperture counts using extracted products
[Mon Aug  6 11:19:42 2012] Error reading totcts from fullrun_pn_xmm0650384601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Aug  6 11:19:44 2012] No arf file for this source, not re-computing flux
[Mon Aug  6 11:21:16 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Mon Aug  6 11:21:16 2012] Source 5 has no response, skipping