[Sun Aug  5 01:21:49 2012] Detection parameters:
  Position = (302.8, 282.0) = 13 22 49.22 31 39 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 359.7 +/- 24.1
  Background counts = 13.9
  Rate = 0.03 +/- 0.002

[Sun Aug  5 01:21:49 2012] Off-axis axis estimate = 1.23'
[Sun Aug  5 02:41:20 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 02:41:20 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Sun Aug  5 02:41:20 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Sun Aug  5 02:41:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.05"
[Sun Aug  5 03:31:04 2012] fullrun_mos2_xmm0650384601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug  5 03:31:04 2012] fullrun_mos2_xmm0650384601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug  5 03:31:04 2012] Fit fullrun_mos2_xmm0650384601_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Aug  5 03:31:04 2012] fullrun_mos2_xmm0650384601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug  5 03:31:04 2012] fullrun_mos2_xmm0650384601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug  5 03:31:04 2012] Fit fullrun_mos2_xmm0650384601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug  5 03:31:16 2012] Spatial fit model total counts = 1329.880000, observed total counts = 1328.000000
[Sun Aug  5 03:31:16 2012] Offset between fit and detection position for source 2 = 0.521571 pixels
[Sun Aug  5 03:31:16 2012] 1279.208000 total counts/ 970.981000 bgd. counts: snr = 9.891572
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.521571 pixels
  Position = (302.6, 282.4) = 13 22 49.31 31 39 17.0
  Extent = 14.1 (14.1-28.2)", rotation angle = 0
  Source counts = 308.2 +/- 35.8
  Background counts = 971.0
  Rate = 0.02 +/- 0.003
[Sun Aug  5 03:31:16 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 03:31:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 03:31:16 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 03:31:16 2012] Source does appear to be extended
[Sun Aug  5 03:31:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 03:31:16 2012] Source is confused with source 1
[Sun Aug  5 04:43:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 04:43:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug  5 04:43:38 2012] Initial guess for spatial extent in simple fitting = 14.09"
[Sun Aug  5 04:43:38 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.876
[Sun Aug  5 04:43:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.09"
[Sun Aug  5 05:40:34 2012] fullrun_mos2_xmm0650384601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug  5 05:40:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650384601_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 05:40:34 2012] fullrun_mos2_xmm0650384601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug  5 05:40:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650384601_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 05:40:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650384601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650384601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 05:40:34 2012] fullrun_mos2_xmm0650384601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug  5 05:40:34 2012] fullrun_mos2_xmm0650384601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug  5 05:40:34 2012] Fit fullrun_mos2_xmm0650384601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug  5 05:40:46 2012] Warning, spatial fit 1 centroid is now closest to src. 1
[Sun Aug  5 05:40:46 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 05:40:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 05:40:46 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 05:40:46 2012] Source does appear to be extended
[Sun Aug  5 05:40:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  6 10:45:35 2012] XMMSAS src. selection expression = ellipse(26274.350200, 24522.952000, 845.502024, 845.502024, 0.000000, X, Y)
[Mon Aug  6 10:45:35 2012] Writing source region out to fullrun_mos2_xmm0650384601_pi300-10000_pass1_cl_src2_src.reg
[Mon Aug  6 10:45:35 2012] Extracting stamp from image fullrun_mos2_xmm0650384601_pi300-10000_cl_sm2.00.img.gz, (254, 234) - (351, 331)
[Mon Aug  6 10:45:35 2012] XMMSAS bgd. selection expression = annulus(26274.350200, 24522.952000, 1409.170041, 2818.340081, X, Y) && !ellipse(26047.911200, 24378.793600, 2254.672065, 2254.672065, 0.000000, X, Y) && !ellipse(25487.750000, 23538.146000, 1237.288036, 1237.288036, 0.000000, X, Y) && !ellipse(24676.221375, 24192.780365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25319.599000, 25751.256000, 1075.632031, 1075.632031, 0.000000, X, Y) && !ellipse(24875.166000, 25371.292000, 1103.720032, 1103.720032, 0.000000, X, Y) && !ellipse(24766.810974, 23800.266144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26287.476349, 23151.618591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25247.708466, 22856.745728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27425.438000, 22951.702000, 1217.888035, 1217.888035, 333.388000, X, Y) && !ellipse(26353.822876, 26105.553741, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug  6 10:45:35 2012] Writing fullrun_mos2_xmm0650384601_pi300-10000_pass1_cl_src2.gif
[Mon Aug  6 10:45:39 2012] Mean detx,y = (471.00, -353.44) 
[Mon Aug  6 10:45:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug  6 10:45:54 2012] Binned source spectrum to 10 counts/bin
[Mon Aug  6 10:45:54 2012] Setting source spectrum file to fullrun_mos2_xmm0650384601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Aug  6 10:45:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650384601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Aug  6 11:19:47 2012] Updating aperture counts using extracted products
[Mon Aug  6 11:19:47 2012] Error reading totcts from fullrun_mos2_xmm0650384601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Aug  6 11:19:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug  6 11:19:48 2012] Using photon index=1.80, rate=0.0248, arf fullrun_mos2_xmm0650384601_pi300-10000_pass1_cl_src2.arf
[Mon Aug  6 11:19:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug  6 11:19:48 2012] Updating source flux to 2.6e-13
[Mon Aug  6 11:20:32 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Aug  6 11:21:16 2012] Reading fit data from xmm0650384601/analysis//spectral/fullrun_mos2_xmm0650384601_pi300-10000_pass1_cl_src2_pl.csv
[Mon Aug  6 11:21:16 2012] Spectral fit parameter nH value = 4.16792e+20
[Mon Aug  6 11:21:16 2012] Spectral fit parameter PhoIndex value = 1.67938
[Mon Aug  6 11:21:16 2012] Failed to get F(0.3-8.0) from xmm0650384601/analysis//spectral/fullrun_mos2_xmm0650384601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Aug  6 11:21:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug  6 11:21:16 2012] Using Nh = 4.2e+20, photon index=1.68, rate=0.0248, arf fullrun_mos2_xmm0650384601_pi300-10000_pass1_cl_src2.arf
[Mon Aug  6 11:21:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug  6 11:21:16 2012] Updating source flux to 2.9e-13