[Sun Aug 5 01:21:33 2012] Detection parameters: Position = (300.2, 280.0) = 13 22 50.13 31 39 6.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 383.2 +/- 24.7 Background counts = 12.0 Rate = 0.03 +/- 0.002 [Sun Aug 5 01:21:33 2012] Off-axis axis estimate = 1.34' [Sun Aug 5 01:58:14 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting [Sun Aug 5 01:58:14 2012] Initial guess for spatial extent in simple fitting = 7.10" [Sun Aug 5 01:58:14 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880 [Sun Aug 5 01:58:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.10" [Sun Aug 5 02:41:20 2012] fullrun_mos1_xmm0650384601_pi300-10000_cl_pass0_src1.ximg exists [Sun Aug 5 02:41:20 2012] fullrun_mos1_xmm0650384601_pi300-10000_cl_pass0_src1_1.ximg exists [Sun Aug 5 02:41:20 2012] Fit fullrun_mos1_xmm0650384601_pi300-10000_cl_pass0_src1 appears to have run properly [Sun Aug 5 02:41:20 2012] fullrun_mos1_xmm0650384601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sun Aug 5 02:41:20 2012] fullrun_mos1_xmm0650384601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sun Aug 5 02:41:20 2012] Fit fullrun_mos1_xmm0650384601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sun Aug 5 03:31:13 2012] Spatial fit model total counts = 1447.960000, observed total counts = 1444.000000 [Sun Aug 5 03:31:13 2012] Offset between fit and detection position for source 1 = 2.201653 pixels [Sun Aug 5 03:31:13 2012] 1417.180000 total counts/ 1005.500000 bgd. counts: snr = 12.982811 Spatial fit parameters: Offset between fit and detection position for source 1 = 2.201653 pixels Position = (302.1, 281.1) = 13 22 49.49 31 39 11.4 Extent = 14.2 (14.2-28.4)", rotation angle = 0 Source counts = 411.7 +/- 37.6 Background counts = 1005.5 Rate = 0.03 +/- 0.003 [Sun Aug 5 03:31:13 2012] Vigneting correction estimate = 1.000000 [Sun Aug 5 03:31:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Aug 5 03:31:13 2012] Assessing source extent using major axis lower bound [Sun Aug 5 03:31:13 2012] Source does appear to be extended [Sun Aug 5 03:31:13 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Aug 5 03:31:13 2012] Source is confused with source 10 [Sun Aug 5 04:04:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Aug 5 04:04:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Aug 5 04:04:47 2012] Initial guess for spatial extent in simple fitting = 14.20" [Sun Aug 5 04:04:47 2012] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.129 [Sun Aug 5 04:04:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.20" [Sun Aug 5 04:43:37 2012] fullrun_mos1_xmm0650384601_pi300-10000_cl_pass1_src1.ximg exists [Sun Aug 5 04:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384601_pi300-10000_cl_pass1_src1.csv [Sun Aug 5 04:43:37 2012] fullrun_mos1_xmm0650384601_pi300-10000_cl_pass1_src1_1.ximg exists [Sun Aug 5 04:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384601_pi300-10000_cl_pass1_src1.csv [Sun Aug 5 04:43:37 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0650384601_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0650384601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 5 04:43:38 2012] fullrun_mos1_xmm0650384601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sun Aug 5 04:43:38 2012] fullrun_mos1_xmm0650384601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sun Aug 5 04:43:38 2012] Fit fullrun_mos1_xmm0650384601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sun Aug 5 05:40:42 2012] Warning, spatial fit 1 centroid is now closest to src. 11 [Sun Aug 5 05:40:42 2012] Source 1 is offset by 1.083350 and 4.767599 pixels which is larger than 2 X fitted extent = 0.861871 x 0.861871, not incorporating fit results [Sun Aug 5 05:40:42 2012] Vigneting correction estimate = 1.000000 [Sun Aug 5 05:40:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Aug 5 05:40:42 2012] Assessing source extent using major axis lower bound [Sun Aug 5 05:40:42 2012] Source does appear to be extended [Sun Aug 5 05:40:42 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 6 10:02:15 2012] XMMSAS src. selection expression = ellipse(26229.920600, 24411.269080, 851.832025, 851.832025, 0.000000, X, Y) [Mon Aug 6 10:02:15 2012] Writing source region out to fullrun_mos1_xmm0650384601_pi300-10000_pass1_cl_src1_src.reg [Mon Aug 6 10:02:15 2012] Extracting stamp from image fullrun_mos1_xmm0650384601_pi300-10000_cl_sm2.00.img.gz, (253, 232) - (351, 330) [Mon Aug 6 10:02:15 2012] XMMSAS bgd. selection expression = annulus(26229.920600, 24411.269080, 1419.720041, 2839.440082, X, Y) && !ellipse(26207.031616, 23364.801514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27206.919600, 21890.053800, 359.581610, 359.581610, 0.000000, X, Y) && !ellipse(25634.649780, 25339.976044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26557.012268, 25523.353607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25657.088000, 23584.604000, 2331.800067, 2331.800067, 0.000000, X, Y) && !ellipse(25477.146000, 24624.854000, 1113.288032, 1113.288032, 0.000000, X, Y) && !ellipse(24898.574768, 23551.696991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24542.344177, 23980.648834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.748444, 23047.905182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26544.084000, 22302.548000, 1233.904036, 1233.904036, 0.000000, X, Y) [Mon Aug 6 10:02:15 2012] Writing fullrun_mos1_xmm0650384601_pi300-10000_pass1_cl_src1.gif [Mon Aug 6 10:02:18 2012] Mean detx,y = (-87.77, -538.35) [Mon Aug 6 10:02:20 2012] Setting backscal keywords in source and bgd. spectrum [Mon Aug 6 10:02:31 2012] Binned source spectrum to 10 counts/bin [Mon Aug 6 10:02:31 2012] Setting source spectrum file to fullrun_mos1_xmm0650384601_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Mon Aug 6 10:02:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650384601_pi300-10000_pass1_cl_src1_bgd.pi.gz [Mon Aug 6 11:19:45 2012] Updating aperture counts using extracted products [Mon Aug 6 11:19:45 2012] Error reading totcts from fullrun_mos1_xmm0650384601_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Mon Aug 6 11:19:46 2012] Calculating source flux in energy range 0.30-8.00 [Mon Aug 6 11:19:46 2012] Using photon index=1.80, rate=0.0332, arf fullrun_mos1_xmm0650384601_pi300-10000_pass1_cl_src1.arf [Mon Aug 6 11:19:46 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Aug 6 11:19:46 2012] Updating source flux to 3.2e-13 [Mon Aug 6 11:19:50 2012] Flag b found in src. 1 procflags, skipping spectral fitting [Mon Aug 6 11:19:50 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Mon Aug 6 11:20:32 2012] Reading fit data from xmm0650384601/analysis//spectral/fullrun_mos1_xmm0650384601_pi300-10000_pass1_cl_src1_pl.csv [Mon Aug 6 11:20:32 2012] Spectral fit parameter nH value = 7.47938e+20 [Mon Aug 6 11:20:32 2012] Spectral fit parameter PhoIndex value = 1.89415 [Mon Aug 6 11:20:32 2012] Failed to get F(0.3-8.0) from xmm0650384601/analysis//spectral/fullrun_mos1_xmm0650384601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Mon Aug 6 11:20:32 2012] Calculating source flux in energy range 0.30-8.00 [Mon Aug 6 11:20:32 2012] Using Nh = 7.5e+20, photon index=1.89, rate=0.0332, arf fullrun_mos1_xmm0650384601_pi300-10000_pass1_cl_src1.arf [Mon Aug 6 11:20:32 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Aug 6 11:20:32 2012] Updating source flux to 3.2e-13