[Thu May 23 11:22:46 2013] Detection parameters:
  Position = (240.2, 294.2) = 23 34 36.45 7 35 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.8 +/- 6.5
  Background counts = 2.4
  Rate = 0.004 +/- 0.001

[Thu May 23 11:22:46 2013] Off-axis axis estimate = 4.24'
[Thu May 23 11:22:57 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Thu May 23 11:22:57 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Thu May 23 11:22:57 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Thu May 23 11:22:57 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.55"
[Thu May 23 11:22:57 2013] fullrun_mos2_xmm0650384501_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 23 11:22:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650384501_pi300-10000_cl_pass0_src5.csv
[Thu May 23 11:22:57 2013] fullrun_mos2_xmm0650384501_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 23 11:22:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650384501_pi300-10000_cl_pass0_src5.csv
[Thu May 23 11:22:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650384501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650384501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 11:22:57 2013] fullrun_mos2_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 23 11:22:57 2013] fullrun_mos2_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 23 11:22:57 2013] Fit fullrun_mos2_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May 23 11:23:02 2013] Spatial fit model total counts = 40.582300, observed total counts = 40.000000
[Thu May 23 11:23:02 2013] Offset between fit and detection position for source 8 = 0.068768 pixels
[Thu May 23 11:23:02 2013] 41.072300 total counts/ 25.960900 bgd. counts: snr = 2.965820
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.068768 pixels
  Position = (240.2, 294.1) = 23 34 36.46 7 35 18.0
  Extent = 3.4 (2.4-7.0)", rotation angle = 0
  Source counts = 15.1 +/- 6.4
  Background counts = 26.0
  Rate = 0.002 +/- 0.0007
[Thu May 23 11:23:02 2013] Vigneting correction estimate = 1.000000
[Thu May 23 11:23:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 11:23:02 2013] Assessing source extent using major axis lower bound
[Thu May 23 11:23:02 2013] Source does appear to be extended
[Thu May 23 11:23:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 11:23:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 11:23:08 2013] Initial guess for spatial extent in simple fitting = 3.39"
[Thu May 23 11:23:08 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.612
[Thu May 23 11:23:08 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 3.39"
[Thu May 23 11:23:08 2013] fullrun_mos2_xmm0650384501_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 23 11:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650384501_pi300-10000_cl_pass1_src5.csv
[Thu May 23 11:23:08 2013] fullrun_mos2_xmm0650384501_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 23 11:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650384501_pi300-10000_cl_pass1_src5.csv
[Thu May 23 11:23:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650384501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650384501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 11:23:08 2013] fullrun_mos2_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 23 11:23:08 2013] fullrun_mos2_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 23 11:23:08 2013] Fit fullrun_mos2_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May 23 11:23:13 2013] Spatial fit model total counts = 40.444700, observed total counts = 40.000000
[Thu May 23 11:23:13 2013] Offset between fit and detection position for source 8 = 0.022307 pixels
[Thu May 23 11:23:13 2013] 40.931100 total counts/ 25.480000 bgd. counts: snr = 3.060974
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.022307 pixels
  Position = (240.2, 294.1) = 23 34 36.46 7 35 18.0
  Extent = 3.7 (2.4-6.8)", rotation angle = 0
  Source counts = 15.5 +/- 6.4
  Background counts = 25.5
  Rate = 0.002 +/- 0.0007
[Thu May 23 11:23:13 2013] Vigneting correction estimate = 1.000000
[Thu May 23 11:23:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 11:23:13 2013] Assessing source extent using major axis lower bound
[Thu May 23 11:23:13 2013] Source does appear to be extended
[Thu May 23 11:23:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 11:32:45 2013] XMMSAS src. selection expression = ellipse(20844.554820, 25542.454200, 221.235949, 221.235949, 0.000000, X, Y)
[Thu May 23 11:32:45 2013] Writing source region out to fullrun_mos2_xmm0650384501_pi300-10000_pass1_cl_src8_src.reg
[Thu May 23 11:32:45 2013] Extracting stamp from image fullrun_mos2_xmm0650384501_pi300-10000_cl_sm2.00.img.gz, (227, 281) - (253, 307)
[Thu May 23 11:32:45 2013] XMMSAS bgd. selection expression = annulus(20844.554820, 25542.454200, 368.726582, 737.453165, X, Y)
[Thu May 23 11:32:45 2013] Writing fullrun_mos2_xmm0650384501_pi300-10000_pass1_cl_src8.gif
[Thu May 23 11:33:23 2013] Mean detx,y = (5621.33, -3787.50) 
[Thu May 23 11:33:24 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 11:33:31 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 11:33:31 2013] Setting source spectrum file to fullrun_mos2_xmm0650384501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 23 11:33:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0650384501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu May 23 11:38:36 2013] Not generating rmf since there are only 15 counts
[Thu May 23 11:38:36 2013] rmf not generated due to insufficient counts
[Thu May 23 11:39:00 2013] Updating aperture counts using extracted products
[Thu May 23 11:39:00 2013] Total counts from fullrun_mos2_xmm0650384501_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 18.00
[Thu May 23 11:39:00 2013] Total counts from fullrun_mos2_xmm0650384501_pi300-10000_pass1_cl_src8_bgd.pi.gz = 15.00
[Thu May 23 11:39:00 2013] Got source and background scale factors 155200.000000, 1279812.000000
[Thu May 23 11:39:00 2013] User source parameters:
  Position = (240.2, 294.1) = 23 34 36.46 7 35 18.0
  Extent = 3.7 (2.4-6.8)", rotation angle = 0
  Source aperture counts = 16.2 +/- 5.3
  Background aperture counts = 1.8
  Rate = 0.002 +/- 0.0006

[Thu May 23 11:39:01 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:39:01 2013] Using photon index=1.80, rate=0.00168, arf fullrun_mos2_xmm0650384501_pi300-10000_pass1_cl_src8.arf
[Thu May 23 11:39:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:39:01 2013] Updating source flux to 3.5e-14
[Thu May 23 11:39:04 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 23 11:39:05 2013] xmm0650384501/analysis//spectral/fullrun_mos2_xmm0650384501_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete