[Thu May 23 11:22:45 2013] Detection parameters:
  Position = (410.8, 144.8) = 23 33 46.54 7 24 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.3 +/- 8.5
  Background counts = 2.2
  Rate = 0.005 +/- 0.0009

[Thu May 23 11:22:45 2013] Off-axis axis estimate = 13.80'
[Thu May 23 11:22:56 2013] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Thu May 23 11:22:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 11:22:56 2013] Initial guess for spatial extent in simple fitting = 13.33"
[Thu May 23 11:22:56 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.964
[Thu May 23 11:22:56 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.33"
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 23 11:22:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src5.csv
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 23 11:22:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src5.csv
[Thu May 23 11:22:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 23 11:22:56 2013] Fit fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May 23 11:23:00 2013] Spatial fit model total counts = 79.741100, observed total counts = 76.000000
[Thu May 23 11:23:00 2013] Offset between fit and detection position for source 8 = 0.178041 pixels
[Thu May 23 11:23:00 2013] 78.153200 total counts/ 33.913400 bgd. counts: snr = 7.596744
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.178041 pixels
  Position = (410.7, 144.9) = 23 33 46.58 7 24 28.7
  Extent = 9.5 (5.6-13.5)", rotation angle = 0
  Source counts = 44.2 +/- 8.8
  Background counts = 33.9
  Rate = 0.005 +/- 0.001
[Thu May 23 11:23:00 2013] Vigneting correction estimate = 1.000000
[Thu May 23 11:23:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 11:23:00 2013] Assessing source extent using major axis lower bound
[Thu May 23 11:23:00 2013] Source does appear to be extended
[Thu May 23 11:23:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 11:23:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 11:23:07 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Thu May 23 11:23:07 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.034
[Thu May 23 11:23:07 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.54"
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 23 11:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src5.csv
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 23 11:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src5.csv
[Thu May 23 11:23:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 23 11:23:08 2013] Fit fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May 23 11:23:11 2013] Spatial fit model total counts = 66.522200, observed total counts = 65.000000
[Thu May 23 11:23:11 2013] Offset between fit and detection position for source 8 = 0.309364 pixels
[Thu May 23 11:23:11 2013] 66.192200 total counts/ 23.060700 bgd. counts: snr = 8.981695
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.309364 pixels
  Position = (410.4, 144.9) = 23 33 46.67 7 24 28.6
  Extent = 9.4 (3.2-12.8)", rotation angle = 0
  Source counts = 43.1 +/- 8.1
  Background counts = 23.1
  Rate = 0.005 +/- 0.0009
[Thu May 23 11:23:11 2013] Vigneting correction estimate = 1.000000
[Thu May 23 11:23:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 11:23:11 2013] Assessing source extent using major axis lower bound
[Thu May 23 11:23:11 2013] Source does appear to be extended
[Thu May 23 11:23:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 11:23:18 2013] XMMSAS src. selection expression = ellipse(35654.204800, 12555.269000, 564.748079, 564.748079, 0.000000, X, Y)
[Thu May 23 11:23:18 2013] Not overwriting source region fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src8_src.reg
[Thu May 23 11:23:18 2013] Extracting stamp from image fullrun_mos1_xmm0650384501_pi300-10000_cl_sm2.00.img.gz, (378, 112) - (443, 177)
[Thu May 23 11:23:18 2013] XMMSAS bgd. selection expression = annulus(35654.204800, 12555.269000, 941.246798, 1882.493596, X, Y)
[Thu May 23 11:23:18 2013] Writing fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src8.gif
[Thu May 23 11:23:48 2013] Mean detx,y = (-10460.45, 12579.30) 
[Thu May 23 11:23:49 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 11:24:03 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 11:24:03 2013] Setting source spectrum file to fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 23 11:24:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu May 23 11:32:28 2013] Not generating rmf since there are only 43 counts
[Thu May 23 11:32:28 2013] rmf not generated due to insufficient counts
[Thu May 23 11:38:59 2013] Updating aperture counts using extracted products
[Thu May 23 11:38:59 2013] Total counts from fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 56.00
[Thu May 23 11:38:59 2013] Total counts from fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src8_bgd.pi.gz = 69.00
[Thu May 23 11:38:59 2013] Got source and background scale factors 996800.000000, 5169663.000000
[Thu May 23 11:38:59 2013] User source parameters:
  Position = (410.4, 144.9) = 23 33 46.67 7 24 28.6
  Extent = 9.4 (3.2-12.8)", rotation angle = 0
  Source aperture counts = 42.7 +/- 8.5
  Background aperture counts = 13.3
  Rate = 0.005 +/- 0.0009

[Thu May 23 11:39:00 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:39:00 2013] Using photon index=1.80, rate=0.0047, arf fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src8.arf
[Thu May 23 11:39:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:39:00 2013] Updating source flux to 1.3e-13
[Thu May 23 11:39:02 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 23 11:39:04 2013] xmm0650384501/analysis//spectral/fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete