[Thu May 23 11:22:45 2013] Detection parameters:
  Position = (314.4, 305.2) = 23 34 14.73 7 36 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.3 +/- 9.8
  Background counts = 3.9
  Rate = 0.006 +/- 0.001

[Thu May 23 11:22:45 2013] Off-axis axis estimate = 1.26'
[Thu May 23 11:22:56 2013] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Thu May 23 11:22:56 2013] Initial guess for spatial extent in simple fitting = 7.06"
[Thu May 23 11:22:56 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.110
[Thu May 23 11:22:56 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.06"
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 23 11:22:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src4.csv
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 23 11:22:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src4.csv
[Thu May 23 11:22:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 23 11:22:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 23 11:22:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 23 11:22:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 11:23:00 2013] Source 7 is offset by 6.900345 and 1.331276 pixels which is larger than
2 X fitted extent = 4.073779 x 4.073779, not incorporating fit results
[Thu May 23 11:23:00 2013] Vigneting correction estimate = 1.000000
[Thu May 23 11:23:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 11:23:00 2013] Assessing source extent using major
[Thu May 23 11:23:00 2013] Source does appear to be extended
[Thu May 23 11:23:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 11:23:07 2013] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Thu May 23 11:23:07 2013] Initial guess for spatial extent in simple fitting = 7.06"
[Thu May 23 11:23:07 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.110
[Thu May 23 11:23:07 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.06"
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 23 11:23:08 2013] Fit fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 23 11:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 23 11:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 23 11:23:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 11:23:11 2013] Source 7 is offset by -6.070322 and -4.532059 pixels which is larger than
2 X fitted extent = 1.774800 x 2.004253, not incorporating fit results
[Thu May 23 11:23:11 2013] Vigneting correction estimate = 1.000000
[Thu May 23 11:23:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 11:23:11 2013] Assessing source extent using major
[Thu May 23 11:23:11 2013] Source does appear to be extended
[Thu May 23 11:23:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 11:23:18 2013] XMMSAS src. selection expression = ellipse(27306.003998, 26504.410828, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 11:23:18 2013] Not overwriting source region fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src7_src.reg
[Thu May 23 11:23:18 2013] Extracting stamp from image fullrun_mos1_xmm0650384501_pi300-10000_cl_sm2.00.img.gz, (277, 268) - (352, 343)
[Thu May 23 11:23:18 2013] XMMSAS bgd. selection expression = annulus(27306.003998, 26504.410828, 1087.500000, 2175.000000, X, Y) && !ellipse(27899.477800, 26902.415200, 404.684012, 404.684012, 0.000000, X, Y) && !ellipse(24665.167420, 26252.841200, 482.310414, 482.310414, 0.000000, X, Y)
[Thu May 23 11:23:18 2013] Writing fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src7.gif
[Thu May 23 11:23:38 2013] Mean detx,y = (-79.78, 89.57) 
[Thu May 23 11:23:39 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 11:23:47 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 11:23:47 2013] Setting source spectrum file to fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 23 11:23:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May 23 11:32:24 2013] Not generating rmf since there are only 43 counts
[Thu May 23 11:32:24 2013] rmf not generated due to insufficient counts
[Thu May 23 11:38:59 2013] Updating aperture counts using extracted products
[Thu May 23 11:38:59 2013] Total counts from fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 367.00
[Thu May 23 11:38:59 2013] Total counts from fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src7_bgd.pi.gz = 344.00
[Thu May 23 11:38:59 2013] Got source and background scale factors 1334400.000000, 10973188.000000
[Thu May 23 11:38:59 2013] User source parameters:
  Position = (314.4, 305.2) = 23 34 14.73 7 36 1.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 325.2 +/- 20.2
  Background aperture counts = 41.8
  Rate = 0.04 +/- 0.002

[Thu May 23 11:38:59 2013] Updating counts from extracted products
[Thu May 23 11:38:59 2013] Set source signif. to 325.17/6.47 = 50.27
[Thu May 23 11:38:59 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:38:59 2013] Using photon index=1.80, rate=0.0354, arf fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src7.arf
[Thu May 23 11:38:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:39:00 2013] Updating source flux to 3.7e-13
[Thu May 23 11:39:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 11:39:04 2013] xmm0650384501/analysis//spectral/fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete