[Thu May 23 11:22:45 2013] Detection parameters:
  Position = (284.0, 302.2) = 23 34 23.62 7 35 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 373.8 +/- 23.5
  Background counts = 3.5
  Rate = 0.05 +/- 0.003

[Thu May 23 11:22:45 2013] Off-axis axis estimate = 1.08'
[Thu May 23 11:22:56 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Thu May 23 11:22:56 2013] Initial guess for spatial extent in simple fitting = 6.97"
[Thu May 23 11:22:56 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.905
[Thu May 23 11:22:56 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 6.97"
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 23 11:22:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src2.csv
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 23 11:22:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src2.csv
[Thu May 23 11:22:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 23 11:22:56 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 23 11:22:56 2013] Fit fullrun_mos1_xmm0650384501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 23 11:23:00 2013] Source 1 is offset by 6.450377 and 5.590270 pixels which is larger than
2 X fitted extent = 0.800887 x 0.800887, not incorporating fit results
[Thu May 23 11:23:00 2013] Vigneting correction estimate = 1.000000
[Thu May 23 11:23:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 11:23:00 2013] Assessing source extent using major
[Thu May 23 11:23:00 2013] Source does appear to be extended
[Thu May 23 11:23:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 11:23:07 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Thu May 23 11:23:07 2013] Initial guess for spatial extent in simple fitting = 6.97"
[Thu May 23 11:23:07 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.905
[Thu May 23 11:23:07 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 6.97"
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 23 11:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src2.csv
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 23 11:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src2.csv
[Thu May 23 11:23:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 23 11:23:08 2013] fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 23 11:23:08 2013] Fit fullrun_mos1_xmm0650384501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May 23 11:23:11 2013] Spatial fit model total counts = 372.782000, observed total counts = 373.000000
[Thu May 23 11:23:11 2013] Offset between fit and detection position for source 1 = 0.132912 pixels
[Thu May 23 11:23:11 2013] 372.544400 total counts/ 99.687400 bgd. counts: snr = 27.328448
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.132912 pixels
  Position = (284.1, 302.3) = 23 34 23.61 7 35 53.6
  Extent = 6.0 (5.5-6.6)", rotation angle = 0
  Source counts = 272.9 +/- 19.3
  Background counts = 99.7
  Rate = 0.03 +/- 0.002
[Thu May 23 11:23:11 2013] Vigneting correction estimate = 1.000000
[Thu May 23 11:23:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 11:23:11 2013] Assessing source extent using major axis lower bound
[Thu May 23 11:23:11 2013] Source does appear to be extended
[Thu May 23 11:23:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 11:23:18 2013] XMMSAS src. selection expression = ellipse(24665.167420, 26252.841200, 361.732810, 361.732810, 0.000000, X, Y)
[Thu May 23 11:23:18 2013] Not overwriting source region fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1_src.reg
[Thu May 23 11:23:18 2013] Extracting stamp from image fullrun_mos1_xmm0650384501_pi300-10000_cl_sm2.00.img.gz, (263, 282) - (305, 323)
[Thu May 23 11:23:18 2013] XMMSAS bgd. selection expression = annulus(24665.167420, 26252.841200, 602.888017, 1205.776035, X, Y)
[Thu May 23 11:23:18 2013] Writing fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1.gif
[Thu May 23 11:23:18 2013] ../../xmm0650384501/products/events/fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0650384501/products/events/fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu May 23 11:23:18 2013] Mean detx,y = (-1534.40, -2453.92) 
[Thu May 23 11:23:19 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 11:23:26 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 11:23:26 2013] Setting source spectrum file to fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 23 11:23:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 23 11:38:58 2013] Updating aperture counts using extracted products
[Thu May 23 11:38:58 2013] Total counts from fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 291.00
[Thu May 23 11:38:59 2013] Total counts from fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1_bgd.pi.gz = 77.00
[Thu May 23 11:38:59 2013] Got source and background scale factors 411200.000000, 3422400.000000
[Thu May 23 11:38:59 2013] User source parameters:
  Position = (284.1, 302.3) = 23 34 23.61 7 35 53.6
  Extent = 6.0 (5.5-6.6)", rotation angle = 0
  Source aperture counts = 281.7 +/- 18.1
  Background aperture counts = 9.3
  Rate = 0.03 +/- 0.002

[Thu May 23 11:38:59 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:38:59 2013] Using photon index=1.80, rate=0.0297, arf fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1.arf
[Thu May 23 11:38:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:38:59 2013] Updating source flux to 3.9e-13
[Thu May 23 11:39:02 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Thu May 23 11:39:04 2013] xmm0650384501/analysis//spectral/fullrun_mos1_xmm0650384501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete