[Mon Mar 26 14:25:26 2012] Detection parameters:
  Position = (319.3, 312.9) = 21 15 59.17 -23 10 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.5 +/- 12.3
  Background counts = 4.5
  Rate = 0.01 +/- 0.002

[Mon Mar 26 14:25:27 2012] Off-axis axis estimate = 1.84'
[Mon Mar 26 19:52:16 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 19:52:16 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Mon Mar 26 19:52:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Mon Mar 26 19:52:16 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.35"
[Mon Mar 26 22:14:10 2012] fullrun_mos2_xmm0650383901_pi300-10000_cl_pass0_src3.ximg exists
[Mon Mar 26 22:14:10 2012] fullrun_mos2_xmm0650383901_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Mar 26 22:14:10 2012] Fit fullrun_mos2_xmm0650383901_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon Mar 26 22:14:11 2012] fullrun_mos2_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Mar 26 22:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Mar 26 22:14:11 2012] fullrun_mos2_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Mar 26 22:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Mar 26 22:14:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 22:14:41 2012] Warning, spatial fit 3 centroid is now closest to src. 18
[Mon Mar 26 22:14:41 2012] Spatial fit model total counts = 400.293000, observed total counts = 378.000000
[Mon Mar 26 22:14:41 2012] Offset between fit and detection position for source 3 = 2.018474 pixels
[Mon Mar 26 22:14:41 2012] Warning, changing simple spatial fit ID from 3 to 6
[Mon Mar 26 22:14:41 2012] 382.235000 total counts/ 266.273000 bgd. counts: snr = 7.106441
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.018474 pixels
  Position = (319.5, 310.9) = 21 15 59.09 -23 10 29.4
  Extent = 14.5 (14.2-28.9)", rotation angle = 0
  Source counts = 116.0 +/- 19.6
  Background counts = 266.3
  Rate = 0.02 +/- 0.003
[Mon Mar 26 22:14:41 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 22:14:41 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 22:14:41 2012] Source does appear to be extended
[Mon Mar 26 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 22:14:41 2012] Source is confused with source 5
[Mon Mar 26 22:14:41 2012] Source is confused with source 18
[Mon Mar 26 22:14:41 2012] Source is confused with source 14
[Tue Mar 27 01:18:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 01:18:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 01:18:00 2012] Initial guess for spatial extent in simple fitting = 14.46"
[Tue Mar 27 01:18:00 2012] source mask rpix=3.3, npix_max = 58, mask sum = 51, frac = 0.871
[Tue Mar 27 01:18:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.46"
[Tue Mar 27 03:07:27 2012] fullrun_mos2_xmm0650383901_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar 27 03:07:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383901_pi300-10000_cl_pass1_src3.csv
[Tue Mar 27 03:07:27 2012] fullrun_mos2_xmm0650383901_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar 27 03:07:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383901_pi300-10000_cl_pass1_src3.csv
[Tue Mar 27 03:07:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650383901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650383901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 03:07:27 2012] fullrun_mos2_xmm0650383901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 27 03:07:28 2012] fullrun_mos2_xmm0650383901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 27 03:07:28 2012] Fit fullrun_mos2_xmm0650383901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Mar 27 03:07:52 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Tue Mar 27 03:07:52 2012] Spatial fit model total counts = 404.067000, observed total counts = 378.000000
[Tue Mar 27 03:07:52 2012] Offset between fit and detection position for source 3 = 4.410788 pixels
[Tue Mar 27 03:07:52 2012] Warning, changing simple spatial fit ID from 3 to 4
[Tue Mar 27 03:07:52 2012] 400.334300 total counts/ 323.336000 bgd. counts: snr = 4.282073
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.410788 pixels
  Position = (316.8, 307.4) = 21 15 59.94 -23 10 44.6
  Extent = 14.5 (14.4-14.5)", rotation angle = 0
  Source counts = 77.0 +/- 20.0
  Background counts = 323.3
  Rate = 0.01 +/- 0.003
[Tue Mar 27 03:07:52 2012] Source 3 is offset by -3.161584 and 0.126740 pixels which is larger than
2 X fitted extent = 0.876014 x 0.876014, not incorporating fit results
[Tue Mar 27 03:07:52 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 03:07:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 03:07:52 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 03:07:52 2012] Source does appear to be extended
[Tue Mar 27 03:07:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 04:35:12 2012] XMMSAS src. selection expression = ellipse(27515.736200, 26697.200400, 867.642025, 867.642025, 0.000000, X, Y)
[Tue Mar 27 04:35:12 2012] Writing source region out to fullrun_mos2_xmm0650383901_pi300-10000_pass1_cl_src3_src.reg
[Tue Mar 27 04:35:12 2012] Extracting stamp from image fullrun_mos2_xmm0650383901_pi300-10000_cl_sm2.00.img.gz, (267, 258) - (367, 357)
[Tue Mar 27 04:35:12 2012] XMMSAS bgd. selection expression = annulus(27515.736200, 26697.200400, 1446.070042, 2892.140083, X, Y) && !ellipse(26689.486800, 25973.483400, 986.512028, 986.512028, 0.000000, X, Y) && !ellipse(27636.895200, 26752.066000, 914.112026, 914.112026, 0.000000, X, Y) && !ellipse(28068.836395, 28376.233032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27172.745422, 25712.866943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26240.246033, 26744.544952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27328.553162, 27874.684723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27136.690125, 25043.358826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26398.671631, 25384.176971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28270.000000, 26721.764801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28453.138611, 27240.265472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25594.386261, 27090.346588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25339.753021, 25054.695801, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 04:35:12 2012] Writing fullrun_mos2_xmm0650383901_pi300-10000_pass1_cl_src3.gif
[Tue Mar 27 04:35:57 2012] Mean detx,y = (39.79, -316.32) 
[Tue Mar 27 04:35:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 04:36:09 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 04:36:10 2012] Setting source spectrum file to fullrun_mos2_xmm0650383901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 27 04:36:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650383901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Mar 27 04:40:57 2012] Not generating rmf since there are only 76 counts
[Tue Mar 27 04:40:57 2012] rmf not generated due to insufficient counts
[Tue Mar 27 04:44:20 2012] Updating aperture counts using extracted products
[Tue Mar 27 04:44:20 2012] Error reading totcts from fullrun_mos2_xmm0650383901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 27 04:44:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 04:44:21 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos2_xmm0650383901_pi300-10000_pass1_cl_src3.arf
[Tue Mar 27 04:44:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 04:44:21 2012] Updating source flux to 1.1e-13
[Tue Mar 27 04:44:38 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Tue Mar 27 04:44:38 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Tue Mar 27 04:44:38 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 27 04:44:39 2012] xmm0650383901/analysis//spectral/fullrun_mos2_xmm0650383901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete