[Mon Mar 26 14:24:43 2012] Detection parameters:
  Position = (379.7, 186.6) = 21 15 40.07 -23 19 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.2 +/- 6.4
  Background counts = 2.6
  Rate = 0.006 +/- 0.002

[Mon Mar 26 14:24:43 2012] Off-axis axis estimate = 10.03'
[Mon Mar 26 17:07:53 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 17:07:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 17:07:53 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Mon Mar 26 17:07:53 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.072
[Mon Mar 26 17:07:53 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 11.44"
[Mon Mar 26 19:52:15 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src20.ximg exists
[Mon Mar 26 19:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src20.csv
[Mon Mar 26 19:52:15 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Mar 26 19:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src20.csv
[Mon Mar 26 19:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 19:52:16 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Mar 26 19:52:16 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Mar 26 19:52:16 2012] Fit fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Mar 26 22:14:33 2012] Spatial fit model total counts = 51.705300, observed total counts = 51.000000
[Mon Mar 26 22:14:33 2012] Offset between fit and detection position for source 28 = 0.180082 pixels
[Mon Mar 26 22:14:33 2012] 51.963500 total counts/ 39.722300 bgd. counts: snr = 1.942257
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.180082 pixels
  Position = (379.8, 186.7) = 21 15 40.05 -23 19 29.5
  Extent = 2.9" x 2.9", rotation angle = 0
  Source counts = 12.2 +/- 7.2
  Background counts = 39.7
  Rate = 0.002 +/- 0.0009
[Mon Mar 26 22:14:33 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 22:14:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 22:14:33 2012] Assessing source extent using major
[Mon Mar 26 22:14:33 2012] Source does appear to be extended
[Mon Mar 26 22:14:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 22:14:33 2012] Deleting source due to low Poisson probability 0.8