[Mon Mar 26 14:24:43 2012] Detection parameters:
  Position = (331.4, 301.1) = 21 15 55.35 -23 11 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.7 +/- 7.1
  Background counts = 4.5
  Rate = 0.003 +/- 0.001

[Mon Mar 26 14:24:43 2012] Off-axis axis estimate = 2.39'
[Mon Mar 26 17:07:53 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 17:07:53 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Mon Mar 26 17:07:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.985
[Mon Mar 26 17:07:53 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.63"
[Mon Mar 26 19:52:15 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src27.ximg exists
[Mon Mar 26 19:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src27.csv
[Mon Mar 26 19:52:15 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Mar 26 19:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src27.csv
[Mon Mar 26 19:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 19:52:16 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Mar 26 19:52:16 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Mar 26 19:52:16 2012] Fit fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Mar 26 22:14:33 2012] Source 25 is offset by 4.189877 and 2.110894 pixels which is larger than
2 X fitted extent = 2.108662 x 2.108662, not incorporating fit results
[Mon Mar 26 22:14:33 2012] Spatial fit model total counts = 137.692000, observed total counts = 129.000000
[Mon Mar 26 22:14:33 2012] Offset between fit and detection position for source 25 = 2.595266 pixels
[Mon Mar 26 22:14:33 2012] 129.346700 total counts/ 113.098000 bgd. counts: snr = 1.527887
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.595266 pixels
  Position = (329.4, 299.4) = 21 15 55.97 -23 11 19.4
  Extent = 8.5 (1.9-15.3)", rotation angle = 0
  Source counts = 16.2 +/- 11.4
  Background counts = 113.1
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability