[Mon Mar 26 14:24:43 2012] Detection parameters:
  Position = (299.5, 316.5) = 21 16 5.39 -23 10 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.3 +/- 7.3
  Background counts = 4.0
  Rate = 0.004 +/- 0.001

[Mon Mar 26 14:24:43 2012] Off-axis axis estimate = 1.31'
[Mon Mar 26 17:07:53 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 17:07:53 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Mon Mar 26 17:07:53 2012] source mask rpix=1.6, npix_max = 18, mask sum = 25, frac = 1.379
[Mon Mar 26 17:07:53 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.08"
[Mon Mar 26 19:52:15 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src24.ximg exists
[Mon Mar 26 19:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src24.csv
[Mon Mar 26 19:52:15 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon Mar 26 19:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src24.csv
[Mon Mar 26 19:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 19:52:16 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon Mar 26 19:52:16 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Mar 26 19:52:16 2012] Fit fullrun_mos1_xmm0650383901_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Mon Mar 26 22:14:33 2012] Source 22 is offset by 0.143304 and 4.967282 pixels which is larger than
2 X fitted extent = 0.850212 x 0.850212, not incorporating fit results
[Mon Mar 26 22:14:33 2012] Source 22 is offset by 0.287930 and 5.007406 pixels which is larger than
2 X fitted extent = 1.045494 x 1.045494, not incorporating fit results
[Mon Mar 26 22:14:33 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 22:14:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 22:14:33 2012] Assessing source extent using major
[Mon Mar 26 22:14:33 2012] Source does appear to be extended
[Mon Mar 26 22:14:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 23:50:09 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 23:50:09 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Mon Mar 26 23:50:09 2012] source mask rpix=1.6, npix_max = 18, mask sum = 25, frac = 1.379
[Mon Mar 26 23:50:09 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.08"
[Tue Mar 27 01:18:00 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass1_src17.ximg exists
[Tue Mar 27 01:18:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383901_pi300-10000_cl_pass1_src17.csv
[Tue Mar 27 01:18:00 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Mar 27 01:18:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383901_pi300-10000_cl_pass1_src17.csv
[Tue Mar 27 01:18:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650383901_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650383901_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 01:18:00 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Mar 27 01:18:00 2012] fullrun_mos1_xmm0650383901_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Mar 27 01:18:00 2012] Fit fullrun_mos1_xmm0650383901_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Mar 27 03:07:45 2012] Source 22 is offset by 0.159284 and 4.985305 pixels which is larger than
2 X fitted extent = 0.817995 x 0.817995, not incorporating fit results
[Tue Mar 27 03:07:45 2012] Source 22 is offset by 0.344068 and 5.037615 pixels which is larger than
2 X fitted extent = 1.095048 x 1.095048, not incorporating fit results
[Tue Mar 27 03:07:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 03:07:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 03:07:45 2012] Assessing source extent using major
[Tue Mar 27 03:07:45 2012] Source does appear to be extended
[Tue Mar 27 03:07:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 04:01:48 2012] XMMSAS src. selection expression = ellipse(26010.309875, 27486.049500, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 27 04:01:48 2012] Writing source region out to fullrun_mos1_xmm0650383901_pi300-10000_pass1_cl_src22_src.reg
[Tue Mar 27 04:01:48 2012] Extracting stamp from image fullrun_mos1_xmm0650383901_pi300-10000_cl_sm2.00.img.gz, (262, 279) - (337, 354)
[Tue Mar 27 04:01:48 2012] XMMSAS bgd. selection expression = annulus(26010.309875, 27486.049500, 1087.500000, 2175.000000, X, Y) && !ellipse(27692.808200, 27472.960000, 964.680028, 964.680028, 0.000000, X, Y) && !ellipse(27365.856323, 26395.366119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28054.076228, 28285.256000, 677.369619, 677.369619, 0.000000, X, Y) && !ellipse(28303.893800, 25170.743800, 430.218412, 333.121610, 358.666540, X, Y) && !ellipse(27094.193726, 27874.079376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26433.630000, 25843.479600, 2080.488060, 2080.488060, 0.000000, X, Y) && !ellipse(27264.373138, 27443.383179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.275909, 25702.098145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27393.054443, 26751.118805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27924.572723, 26230.541901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25234.481110, 25949.626526, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 04:01:48 2012] Writing fullrun_mos1_xmm0650383901_pi300-10000_pass1_cl_src22.gif
[Tue Mar 27 04:07:20 2012] Mean detx,y = (28.21, -1734.10) 
[Tue Mar 27 04:07:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 04:07:35 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 04:07:36 2012] Setting source spectrum file to fullrun_mos1_xmm0650383901_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Mar 27 04:07:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650383901_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Mar 27 04:35:04 2012] Not generating rmf since there are only 25 counts
[Tue Mar 27 04:35:04 2012] rmf not generated due to insufficient counts
[Tue Mar 27 04:44:18 2012] Updating aperture counts using extracted products
[Tue Mar 27 04:44:18 2012] Error reading totcts from fullrun_mos1_xmm0650383901_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Mar 27 04:44:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 04:44:20 2012] Using photon index=1.80, rate=0.00356, arf fullrun_mos1_xmm0650383901_pi300-10000_pass1_cl_src22.arf
[Tue Mar 27 04:44:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 04:44:20 2012] Updating source flux to 3.7e-14
[Tue Mar 27 04:44:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting