[Mon Mar 12 10:53:26 2012] Detection parameters:
  Position = (244.4, 376.3) = 18 7 12.63 29 35 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.5 +/- 6.6
  Background counts = 3.2
  Rate = 0.005 +/- 0.001

[Mon Mar 12 10:53:26 2012] Off-axis axis estimate = 6.87'
[Mon Mar 12 11:54:07 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 11:54:07 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Mon Mar 12 11:54:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.816
[Mon Mar 12 11:54:07 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.87"
[Mon Mar 12 12:20:38 2012] fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_src5.ximg exists
[Mon Mar 12 12:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_src5.csv
[Mon Mar 12 12:20:38 2012] fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Mar 12 12:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_src5.csv
[Mon Mar 12 12:20:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 12:20:38 2012] fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Mar 12 12:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Mar 12 12:20:38 2012] fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Mar 12 12:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Mar 12 12:20:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650383501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 12:20:51 2012] Source 7 is offset by 0.059584 and -7.828862 pixels which is larger than
2 X fitted extent = 3.706202 x 3.706202, not incorporating fit results
[Mon Mar 12 12:20:51 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 12:20:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 12:20:51 2012] Assessing source extent using major
[Mon Mar 12 12:20:51 2012] Source does appear to be extended
[Mon Mar 12 12:20:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 13:12:25 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 13:12:25 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Mon Mar 12 13:12:25 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.816
[Mon Mar 12 13:12:25 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.87"
[Mon Mar 12 13:37:58 2012] fullrun_mos2_xmm0650383501_pi300-10000_cl_pass1_src4.ximg exists
[Mon Mar 12 13:37:58 2012] fullrun_mos2_xmm0650383501_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Mar 12 13:37:58 2012] Fit fullrun_mos2_xmm0650383501_pi300-10000_cl_pass1_src4 appears to have run properly
[Mon Mar 12 13:37:58 2012] fullrun_mos2_xmm0650383501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Mar 12 13:37:58 2012] fullrun_mos2_xmm0650383501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Mar 12 13:37:58 2012] Fit fullrun_mos2_xmm0650383501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Mar 12 13:38:10 2012] Spatial fit model total counts = 53.307800, observed total counts = 49.000000
[Mon Mar 12 13:38:10 2012] Offset between fit and detection position for source 7 = 0.326878 pixels
[Mon Mar 12 13:38:10 2012] 53.729000 total counts/ 35.062400 bgd. counts: snr = 3.152422
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.326878 pixels
  Position = (244.5, 376.0) = 18 7 12.59 29 35 18.8
  Extent = 5.6 (3.2-9.1)", rotation angle = 0
  Source counts = 18.7 +/- 7.3
  Background counts = 35.1
  Rate = 0.002 +/- 0.0009
[Mon Mar 12 13:38:10 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 13:38:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 13:38:10 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 13:38:10 2012] Source does appear to be extended
[Mon Mar 12 13:38:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 14:19:22 2012] XMMSAS src. selection expression = ellipse(21219.263000, 32662.932200, 333.916210, 333.916210, 0.000000, X, Y)
[Mon Mar 12 14:19:22 2012] Writing source region out to fullrun_mos2_xmm0650383501_pi300-10000_pass1_cl_src7_src.reg
[Mon Mar 12 14:19:22 2012] Extracting stamp from image fullrun_mos2_xmm0650383501_pi300-10000_cl_sm2.00.img.gz, (225, 357) - (264, 395)
[Mon Mar 12 14:19:22 2012] XMMSAS bgd. selection expression = annulus(21219.263000, 32662.932200, 556.527016, 1113.054032, X, Y)
[Mon Mar 12 14:19:22 2012] Writing fullrun_mos2_xmm0650383501_pi300-10000_pass1_cl_src7.gif
[Mon Mar 12 14:20:14 2012] Mean detx,y = (4276.30, 5998.30) 
[Mon Mar 12 14:20:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 14:20:46 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 14:20:47 2012] Setting source spectrum file to fullrun_mos2_xmm0650383501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Mar 12 14:20:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650383501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Mar 12 14:29:08 2012] Not generating rmf since there are only 18 counts
[Mon Mar 12 14:29:08 2012] rmf not generated due to insufficient counts
[Mon Mar 12 14:30:41 2012] Updating aperture counts using extracted products
[Mon Mar 12 14:30:41 2012] Error reading totcts from fullrun_mos2_xmm0650383501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Mar 12 14:30:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 14:30:41 2012] Using photon index=1.80, rate=0.00222, arf fullrun_mos2_xmm0650383501_pi300-10000_pass1_cl_src7.arf
[Mon Mar 12 14:30:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 14:30:41 2012] Updating source flux to 4.4e-14
[Mon Mar 12 14:30:56 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Mon Mar 12 14:30:56 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting