[Wed Mar  7 06:11:57 2012] Detection parameters:
  Position = (267.0, 302.1) = 17 52 4.52 44 41 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.8 +/- 20.7
  Background counts = 34.3
  Rate = 0.02 +/- 0.002

[Wed Mar  7 06:11:59 2012] Off-axis axis estimate = 2.29'
[Wed Mar  7 06:13:27 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 06:13:27 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Wed Mar  7 06:13:27 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Wed Mar  7 06:13:27 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.57"
[Wed Mar  7 08:25:01 2012] fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_src20.ximg exists
[Wed Mar  7 08:25:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_src20.csv
[Wed Mar  7 08:25:01 2012] fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Mar  7 08:25:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_src20.csv
[Wed Mar  7 08:25:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 08:25:02 2012] fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Mar  7 08:25:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Mar  7 08:25:02 2012] fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Mar  7 08:25:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Mar  7 08:25:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650383401_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 15:01:55 2012] Spatial fit model total counts = 932.204000, observed total counts = 929.000000
[Wed Mar  7 15:01:55 2012] Offset between fit and detection position for source 20 = 5.442900 pixels
[Wed Mar  7 15:01:55 2012] Warning, changing simple spatial fit ID from 20 to 16
[Wed Mar  7 15:01:55 2012] 928.452000 total counts/ 778.458000 bgd. counts: snr = 5.375963
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 5.442900 pixels
  Position = (272.4, 303.1) = 17 52 2.34 44 41 5.5
  Extent = 14.4 (14.3-28.8)", rotation angle = 0
  Source counts = 150.0 +/- 30.5
  Background counts = 778.5
  Rate = 0.01 +/- 0.003
[Wed Mar  7 15:01:55 2012] Spatial fit model total counts = 1409.850000, observed total counts = 1107.000000
[Wed Mar  7 15:01:55 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar  7 15:01:55 2012] Spatial fit model total counts = 1383.620000, observed total counts = 1258.000000
[Wed Mar  7 15:01:55 2012] Offset between fit and detection position for source 20 = 3.188982 pixels
[Wed Mar  7 15:01:55 2012] Warning, changing simple spatial fit ID from 16 to 23
[Wed Mar  7 15:01:55 2012] 1360.594000 total counts/ 1248.350000 bgd. counts: snr = 3.176837
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 3.188982 pixels
  Position = (269.2, 302.6) = 17 52 3.63 44 41 3.1
  Extent = 16.5" x 16.3", rotation angle = 85
  Source counts = 112.2 +/- 36.9
  Background counts = 1248.3
  Rate = 0.01 +/- 0.003
[Wed Mar  7 15:01:55 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 15:01:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 15:01:55 2012] Assessing source extent using major
[Wed Mar  7 15:01:55 2012] Source does appear to be extended
[Wed Mar  7 15:01:55 2012] Computing asymmetry using major and minor axis, asym = 1.01
[Wed Mar  7 15:01:55 2012] Source is confused with source 16
[Wed Mar  7 15:02:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 15:02:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 15:02:43 2012] Initial guess for spatial extent in simple fitting = 16.40"
[Wed Mar  7 15:02:43 2012] source mask rpix=3.8, npix_max = 72, mask sum = 80, frac = 1.097
[Wed Mar  7 15:02:43 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 16.40"
[Wed Mar  7 17:42:30 2012] fullrun_pn_xmm0650383401_pi300-10000_cl_pass1_src19.ximg exists
[Wed Mar  7 17:42:30 2012] fullrun_pn_xmm0650383401_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Mar  7 17:42:30 2012] Fit fullrun_pn_xmm0650383401_pi300-10000_cl_pass1_src19 appears to have run properly
[Wed Mar  7 17:42:31 2012] fullrun_pn_xmm0650383401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Mar  7 17:42:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed Mar  7 17:42:31 2012] fullrun_pn_xmm0650383401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Mar  7 17:42:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed Mar  7 17:42:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650383401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650383401_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 22:36:33 2012] Spatial fit model total counts = 3207.670000, observed total counts = 3491.000000
[Wed Mar  7 22:36:33 2012] Offset between fit and detection position for source 20 = 0.726723 pixels
[Wed Mar  7 22:36:33 2012] 3192.708600 total counts/ 3144.660000 bgd. counts: snr = 0.856828
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.726723 pixels
  Position = (269.9, 302.2) = 17 52 3.37 44 41 1.6
  Extent = 5.6" x 5.6", rotation angle = 0
  Source counts = 48.0 +/- 56.5
  Background counts = 3144.7
  Rate = 0.004 +/- 0.005
  Deleting source due to low Poisson probability