[Wed Mar  7 06:12:01 2012] Detection parameters:
  Position = (249.7, 283.0) = 17 52 11.61 44 39 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.6 +/- 9.0
  Background counts = 9.0
  Rate = 0.003 +/- 0.0008

[Wed Mar  7 06:12:01 2012] Off-axis axis estimate = 3.71'
[Wed Mar  7 08:25:03 2012] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 08:25:03 2012] Initial guess for spatial extent in simple fitting = 8.28"
[Wed Mar  7 08:25:03 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.865
[Wed Mar  7 08:25:03 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.28"
[Wed Mar  7 11:39:18 2012] fullrun_mos1_xmm0650383401_pi300-10000_cl_pass0_src29.ximg exists
[Wed Mar  7 11:39:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383401_pi300-10000_cl_pass0_src29.csv
[Wed Mar  7 11:39:18 2012] fullrun_mos1_xmm0650383401_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Mar  7 11:39:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650383401_pi300-10000_cl_pass0_src29.csv
[Wed Mar  7 11:39:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650383401_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650383401_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:39:19 2012] fullrun_mos1_xmm0650383401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Mar  7 11:39:19 2012] fullrun_mos1_xmm0650383401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Mar  7 11:39:19 2012] Fit fullrun_mos1_xmm0650383401_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Mar  7 15:02:09 2012] Spatial fit model total counts = 325.474000, observed total counts = 312.000000
[Wed Mar  7 15:02:09 2012] Offset between fit and detection position for source 36 = 4.448030 pixels
[Wed Mar  7 15:02:09 2012] Warning, changing simple spatial fit ID from 29 to 27
[Wed Mar  7 15:02:09 2012] 326.634900 total counts/ 272.696000 bgd. counts: snr = 3.266350
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 4.448030 pixels
  Position = (252.7, 279.7) = 17 52 10.36 44 39 23.7
  Extent = 15.8 (14.1-31.7)", rotation angle = 0
  Source counts = 53.9 +/- 18.1
  Background counts = 272.7
  Rate = 0.004 +/- 0.001
[Wed Mar  7 15:02:09 2012] Spatial fit model total counts = 229.247000, observed total counts = 228.000000
[Wed Mar  7 15:02:09 2012] Offset between fit and detection position for source 36 = 0.841523 pixels
[Wed Mar  7 15:02:09 2012] Warning, changing simple spatial fit ID from 27 to 29
[Wed Mar  7 15:02:09 2012] 228.082500 total counts/ 148.068000 bgd. counts: snr = 6.575641
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.841523 pixels
  Position = (252.1, 280.3) = 17 52 10.62 44 39 26.0
  Extent = 14.4 (9.9-16.6)", rotation angle = 0
  Source counts = 80.0 +/- 15.1
  Background counts = 148.1
  Rate = 0.006 +/- 0.001
[Wed Mar  7 15:02:09 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 15:02:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 15:02:09 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 15:02:09 2012] Source does appear to be extended
[Wed Mar  7 15:02:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 15:02:09 2012] Source is confused with source 39
[Wed Mar  7 17:42:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 17:42:32 2012] Initial guess for spatial extent in simple fitting = 14.35"
[Wed Mar  7 17:42:32 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.108
[Wed Mar  7 17:42:32 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 14.35"
[Wed Mar  7 20:32:14 2012] fullrun_mos1_xmm0650383401_pi300-10000_cl_pass1_src23.ximg exists
[Wed Mar  7 20:32:14 2012] fullrun_mos1_xmm0650383401_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Mar  7 20:32:14 2012] Fit fullrun_mos1_xmm0650383401_pi300-10000_cl_pass1_src23 appears to have run properly
[Wed Mar  7 20:32:15 2012] fullrun_mos1_xmm0650383401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Mar  7 20:32:15 2012] fullrun_mos1_xmm0650383401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Mar  7 20:32:15 2012] Fit fullrun_mos1_xmm0650383401_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Wed Mar  7 22:36:45 2012] Spatial fit model total counts = 349.096000, observed total counts = 348.000000
[Wed Mar  7 22:36:45 2012] Offset between fit and detection position for source 36 = 0.590073 pixels
[Wed Mar  7 22:36:45 2012] 351.448000 total counts/ 309.508000 bgd. counts: snr = 2.383924
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.590073 pixels
  Position = (251.9, 280.8) = 17 52 10.70 44 39 28.5
  Extent = 11.9 (6.0-28.4)", rotation angle = 0
  Source counts = 41.9 +/- 18.7
  Background counts = 309.5
  Rate = 0.003 +/- 0.001
[Wed Mar  7 22:36:45 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 22:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 22:36:45 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 22:36:45 2012] Source does appear to be extended
[Wed Mar  7 22:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 00:50:53 2012] XMMSAS src. selection expression = ellipse(21865.658700, 24384.995240, 714.804021, 714.804021, 0.000000, X, Y)
[Thu Mar  8 00:50:53 2012] Writing source region out to fullrun_mos1_xmm0650383401_pi300-10000_pass1_cl_src36_src.reg
[Thu Mar  8 00:50:53 2012] Extracting stamp from image fullrun_mos1_xmm0650383401_pi300-10000_cl_sm2.00.img.gz, (211, 240) - (293, 322)
[Thu Mar  8 00:50:53 2012] XMMSAS bgd. selection expression = annulus(21865.658700, 24384.995240, 1191.340034, 2382.680069, X, Y) && !ellipse(22716.360000, 26148.528000, 1284.296037, 1284.296037, 0.000000, X, Y) && !ellipse(23590.054000, 25973.543400, 1151.128033, 1151.128033, 0.000000, X, Y) && !ellipse(24378.414000, 24674.310000, 1179.888034, 1179.888034, 0.000000, X, Y) && !ellipse(22100.876144, 26318.741974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22248.687800, 27061.294000, 770.942422, 770.942422, 0.000000, X, Y) && !ellipse(23656.145844, 25698.468719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24890.386658, 24388.195831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21323.630800, 26238.168000, 586.207217, 586.207217, 0.000000, X, Y) && !ellipse(22395.346000, 26969.412000, 663.087219, 663.087219, 0.000000, X, Y) && !ellipse(23879.162000, 25719.725600, 1179.888034, 1179.888034, 0.000000, X, Y) && !ellipse(23614.207001, 24471.438965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.400800, 24064.296800, 1121.896032, 1121.896032, 0.000000, X, Y) && !ellipse(24183.364000, 25927.698000, 1117.608032, 1117.608032, 0.000000, X, Y) && !ellipse(24994.089447, 25269.612457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21966.523697, 25635.597626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22567.541351, 24641.129852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23510.968842, 27321.464233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.943573, 23573.728424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24242.586060, 23893.800171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20918.778000, 25742.090000, 2717.040078, 2717.040078, 0.000000, X, Y) && !ellipse(24694.944641, 26457.523010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20732.423400, 25178.988000, 1358.520039, 1358.520039, 0.000000, X, Y) && !ellipse(22957.198761, 27440.648499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22061.660840, 28016.055400, 1323.592038, 1323.592038, 0.000000, X, Y)
[Thu Mar  8 00:50:53 2012] Writing fullrun_mos1_xmm0650383401_pi300-10000_pass1_cl_src36.gif
[Thu Mar  8 00:55:07 2012] Mean detx,y = (2744.17, -378.20) 
[Thu Mar  8 00:55:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 00:55:18 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 00:55:18 2012] Setting source spectrum file to fullrun_mos1_xmm0650383401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Mar  8 00:55:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650383401_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu Mar  8 01:19:35 2012] Not generating rmf since there are only 41 counts
[Thu Mar  8 01:19:35 2012] rmf not generated due to insufficient counts
[Thu Mar  8 04:00:52 2012] Updating aperture counts using extracted products
[Thu Mar  8 04:00:52 2012] Error reading totcts from fullrun_mos1_xmm0650383401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Mar  8 04:00:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 04:00:54 2012] Using photon index=1.80, rate=0.00333, arf fullrun_mos1_xmm0650383401_pi300-10000_pass1_cl_src36.arf
[Thu Mar  8 04:00:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 04:00:54 2012] Updating source flux to 3.4e-14
[Thu Mar  8 04:01:00 2012] Flag c found in src. 36 procflags, skipping spectral fitting
[Thu Mar  8 04:01:00 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting