[Mon May  7 10:21:36 2012] Detection parameters:
  Position = (424.9, 343.2) = 17 36 41.28 60 8 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.1 +/- 13.6
  Background counts = 7.9
  Rate = 0.01 +/- 0.002

[Mon May  7 10:21:41 2012] Off-axis axis estimate = 9.72'
[Mon May  7 14:50:11 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Mon May  7 14:50:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 14:50:11 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Mon May  7 14:50:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Mon May  7 14:50:11 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.29"
[Mon May  7 17:05:16 2012] fullrun_mos2_xmm0650383301_pi300-10000_cl_pass0_src3.ximg exists
[Mon May  7 17:05:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383301_pi300-10000_cl_pass0_src3.csv
[Mon May  7 17:05:16 2012] fullrun_mos2_xmm0650383301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May  7 17:05:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383301_pi300-10000_cl_pass0_src3.csv
[Mon May  7 17:05:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650383301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650383301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 17:05:17 2012] fullrun_mos2_xmm0650383301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May  7 17:05:17 2012] fullrun_mos2_xmm0650383301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May  7 17:05:17 2012] Fit fullrun_mos2_xmm0650383301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May  7 17:05:49 2012] Spatial fit model total counts = 172.995000, observed total counts = 173.000000
[Mon May  7 17:05:49 2012] Offset between fit and detection position for source 1 = 0.240858 pixels
[Mon May  7 17:05:49 2012] 174.281400 total counts/ 101.688000 bgd. counts: snr = 7.198836
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.240858 pixels
  Position = (424.6, 343.3) = 17 36 41.41 60 8 41.3
  Extent = 4.8 (3.9-6.5)", rotation angle = 0
  Source counts = 72.6 +/- 13.2
  Background counts = 101.7
  Rate = 0.004 +/- 0.0007
[Mon May  7 17:05:49 2012] Vigneting correction estimate = 1.000000
[Mon May  7 17:05:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 17:05:49 2012] Assessing source extent using major axis lower bound
[Mon May  7 17:05:49 2012] Source does appear to be extended
[Mon May  7 17:05:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 20:51:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 20:51:55 2012] Initial guess for spatial extent in simple fitting = 4.81"
[Mon May  7 20:51:55 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.873
[Mon May  7 20:51:55 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.81"
[Mon May  7 23:35:09 2012] fullrun_mos2_xmm0650383301_pi300-10000_cl_pass1_src3.ximg exists
[Mon May  7 23:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383301_pi300-10000_cl_pass1_src3.csv
[Mon May  7 23:35:09 2012] fullrun_mos2_xmm0650383301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May  7 23:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383301_pi300-10000_cl_pass1_src3.csv
[Mon May  7 23:35:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650383301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650383301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 23:35:09 2012] fullrun_mos2_xmm0650383301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May  7 23:35:09 2012] fullrun_mos2_xmm0650383301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May  7 23:35:09 2012] Fit fullrun_mos2_xmm0650383301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May  7 23:35:42 2012] Spatial fit model total counts = 176.995000, observed total counts = 177.000000
[Mon May  7 23:35:42 2012] Offset between fit and detection position for source 1 = 0.028025 pixels
[Mon May  7 23:35:42 2012] 179.124400 total counts/ 108.673000 bgd. counts: snr = 6.758165
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.028025 pixels
  Position = (424.6, 343.3) = 17 36 41.41 60 8 41.4
  Extent = 4.7 (3.7-6.1)", rotation angle = 0
  Source counts = 70.5 +/- 13.4
  Background counts = 108.7
  Rate = 0.004 +/- 0.0008
[Mon May  7 23:35:42 2012] Vigneting correction estimate = 1.000000
[Mon May  7 23:35:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 23:35:42 2012] Assessing source extent using major axis lower bound
[Mon May  7 23:35:42 2012] Source does appear to be extended
[Mon May  7 23:35:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 06:44:56 2012] XMMSAS src. selection expression = ellipse(36894.428400, 29822.929600, 282.342608, 282.342608, 0.000000, X, Y)
[Tue May  8 06:44:56 2012] Writing source region out to fullrun_mos2_xmm0650383301_pi300-10000_pass1_cl_src1_src.reg
[Tue May  8 06:44:56 2012] Extracting stamp from image fullrun_mos2_xmm0650383301_pi300-10000_cl_sm2.00.img.gz, (408, 327) - (441, 360)
[Tue May  8 06:44:56 2012] XMMSAS bgd. selection expression = annulus(36894.428400, 29822.929600, 470.571014, 941.142027, X, Y)
[Tue May  8 06:44:56 2012] Writing fullrun_mos2_xmm0650383301_pi300-10000_pass1_cl_src1.gif
[Tue May  8 07:01:14 2012] Mean detx,y = (-1560.30, -12950.40) 
[Tue May  8 07:01:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 07:01:31 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 07:01:32 2012] Setting source spectrum file to fullrun_mos2_xmm0650383301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May  8 07:01:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650383301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May  8 07:22:57 2012] Not generating rmf since there are only 70 counts
[Tue May  8 07:22:57 2012] rmf not generated due to insufficient counts
[Tue May  8 07:30:00 2012] Updating aperture counts using extracted products
[Tue May  8 07:30:00 2012] Error reading totcts from fullrun_mos2_xmm0650383301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May  8 07:30:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 07:30:02 2012] Using photon index=1.80, rate=0.004, arf fullrun_mos2_xmm0650383301_pi300-10000_pass1_cl_src1.arf
[Tue May  8 07:30:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 07:30:02 2012] Updating source flux to 1.1e-13
[Tue May  8 07:30:36 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting