[Sun Feb 12 18:02:35 2012] Detection parameters:
  Position = (324.0, 322.9) = 16 25 42.32 -8 30 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.0 +/- 16.3
  Background counts = 17.9
  Rate = 0.02 +/- 0.002

[Sun Feb 12 18:02:35 2012] Off-axis axis estimate = 2.57'
[Sun Feb 12 18:04:03 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 18:04:03 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Sun Feb 12 18:04:03 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Sun Feb 12 18:04:03 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.71"
[Sun Feb 12 18:42:15 2012] fullrun_pn_xmm0650383001_pi300-10000_cl_pass0_src11.ximg exists
[Sun Feb 12 18:42:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383001_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 18:42:15 2012] fullrun_pn_xmm0650383001_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Feb 12 18:42:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383001_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 18:42:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650383001_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650383001_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 18:42:15 2012] fullrun_pn_xmm0650383001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Feb 12 18:42:15 2012] fullrun_pn_xmm0650383001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Feb 12 18:42:15 2012] Fit fullrun_pn_xmm0650383001_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Feb 12 19:45:57 2012] Source 12 is offset by 7.067962 and 4.497995 pixels which is larger than
2 X fitted extent = 3.245513 x 3.245513, not incorporating fit results
[Sun Feb 12 19:45:57 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:45:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:45:57 2012] Assessing source extent using major
[Sun Feb 12 19:45:57 2012] Source does appear to be extended
[Sun Feb 12 19:45:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:46:07 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 19:46:07 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Sun Feb 12 19:46:07 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Sun Feb 12 19:46:07 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.71"
[Sun Feb 12 20:26:01 2012] fullrun_pn_xmm0650383001_pi300-10000_cl_pass1_src11.ximg exists
[Sun Feb 12 20:26:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383001_pi300-10000_cl_pass1_src11.csv
[Sun Feb 12 20:26:01 2012] fullrun_pn_xmm0650383001_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Feb 12 20:26:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650383001_pi300-10000_cl_pass1_src11.csv
[Sun Feb 12 20:26:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650383001_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650383001_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 20:26:01 2012] fullrun_pn_xmm0650383001_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Feb 12 20:26:01 2012] fullrun_pn_xmm0650383001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Feb 12 20:26:01 2012] Fit fullrun_pn_xmm0650383001_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Feb 12 21:16:04 2012] Spatial fit model total counts = 522.108000, observed total counts = 521.000000
[Sun Feb 12 21:16:04 2012] Offset between fit and detection position for source 12 = 2.039441 pixels
[Sun Feb 12 21:16:04 2012] Warning, changing simple spatial fit ID from 11 to 9
[Sun Feb 12 21:16:04 2012] 500.962000 total counts/ 391.890000 bgd. counts: snr = 5.509741
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 2.039441 pixels
  Position = (321.9, 322.7) = 16 25 42.92 -8 30 35.6
  Extent = 15.9 (9.7-30.4)", rotation angle = 0
  Source counts = 109.1 +/- 22.4
  Background counts = 391.9
  Rate = 0.01 +/- 0.002
[Sun Feb 12 21:16:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 21:16:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 21:16:04 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 21:16:04 2012] Source does appear to be extended
[Sun Feb 12 21:16:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 21:16:14 2012] XMMSAS src. selection expression = ellipse(27960.998000, 28027.926000, 952.260027, 952.260027, 0.000000, X, Y)
[Sun Feb 12 21:16:14 2012] Writing source region out to fullrun_pn_xmm0650383001_pi300-10000_pass1_cl_src12_src.reg
[Sun Feb 12 21:16:14 2012] Extracting stamp from image fullrun_pn_xmm0650383001_pi300-10000_cl_sm2.00.img.gz, (267, 268) - (377, 377)
[Sun Feb 12 21:16:14 2012] XMMSAS bgd. selection expression = annulus(27960.998000, 28027.926000, 1587.100046, 3174.200091, X, Y) && !ellipse(26973.252780, 27574.463200, 1038.256030, 1038.256030, 0.000000, X, Y) && !ellipse(26523.983704, 29127.510742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28916.160000, 28777.391200, 1270.920037, 1270.920037, 0.000000, X, Y) && !ellipse(26370.094000, 27914.908000, 1178.880034, 1178.880034, 0.000000, X, Y) && !ellipse(31753.345337, 28427.121979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27783.277374, 26454.299805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27344.367800, 24570.983400, 667.896819, 296.232809, 46.296126, X, Y)
[Sun Feb 12 21:16:14 2012] Writing fullrun_pn_xmm0650383001_pi300-10000_pass1_cl_src12.gif
[Sun Feb 12 21:24:15 2012] Mean detx,y = (1014.22, -97.73) 
[Sun Feb 12 21:24:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 21:24:52 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 21:24:52 2012] Setting source spectrum file to fullrun_pn_xmm0650383001_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Feb 12 21:24:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650383001_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Feb 13 00:15:10 2012] Updating aperture counts using extracted products
[Mon Feb 13 00:15:10 2012] Error reading totcts from fullrun_pn_xmm0650383001_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Feb 13 00:15:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 00:15:10 2012] Using photon index=1.80, rate=0.0121, arf fullrun_pn_xmm0650383001_pi300-10000_pass1_cl_src12.arf
[Mon Feb 13 00:15:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 00:15:10 2012] Updating source flux to 2.9e-14
[Mon Feb 13 00:15:33 2012] Flag b found in src. 12 procflags, skipping spectral fitting