[Sun Feb 12 18:03:13 2012] Detection parameters:
  Position = (365.8, 327.2) = 16 25 30.05 -8 30 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.2 +/- 10.4
  Background counts = 5.0
  Rate = 0.008 +/- 0.001

[Sun Feb 12 18:03:13 2012] Off-axis axis estimate = 5.31'
[Sun Feb 12 19:10:54 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 19:10:54 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Sun Feb 12 19:10:54 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.933
[Sun Feb 12 19:10:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.08"
[Sun Feb 12 19:45:52 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src3.ximg exists
[Sun Feb 12 19:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src3.csv
[Sun Feb 12 19:45:52 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Feb 12 19:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src3.csv
[Sun Feb 12 19:45:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:45:53 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb 12 19:45:53 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb 12 19:45:53 2012] Fit fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb 12 19:46:01 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.288392 pixels away
[Sun Feb 12 19:46:01 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:46:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:46:01 2012] Assessing source extent using major
[Sun Feb 12 19:46:01 2012] Source does appear to be extended
[Sun Feb 12 19:46:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 20:48:57 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 20:48:57 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Sun Feb 12 20:48:57 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.933
[Sun Feb 12 20:48:57 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.08"
[Sun Feb 12 21:16:00 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_src3.ximg exists
[Sun Feb 12 21:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_src3.csv
[Sun Feb 12 21:16:00 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Feb 12 21:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_src3.csv
[Sun Feb 12 21:16:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 21:16:01 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Feb 12 21:16:01 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Feb 12 21:16:01 2012] Fit fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Feb 12 21:16:08 2012] Spatial fit model total counts = 99.728500, observed total counts = 100.000000
[Sun Feb 12 21:16:08 2012] Offset between fit and detection position for source 2 = 0.055242 pixels
[Sun Feb 12 21:16:08 2012] 98.607300 total counts/ 55.098600 bgd. counts: snr = 5.861460
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.055242 pixels
  Position = (365.8, 327.2) = 16 25 30.06 -8 30 15.9
  Extent = 3.6 (2.9-4.5)", rotation angle = 0
  Source counts = 43.5 +/- 9.9
  Background counts = 55.1
  Rate = 0.004 +/- 0.0009
[Sun Feb 12 21:16:08 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 21:16:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 21:16:08 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 21:16:08 2012] Source does appear to be extended
[Sun Feb 12 21:16:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 23:59:48 2012] XMMSAS src. selection expression = ellipse(31776.570120, 28420.128000, 217.284006, 217.284006, 0.000000, X, Y)
[Sun Feb 12 23:59:48 2012] Writing source region out to fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src2_src.reg
[Sun Feb 12 23:59:48 2012] Extracting stamp from image fullrun_mos2_xmm0650383001_pi300-10000_cl_sm2.00.img.gz, (353, 315) - (378, 340)
[Sun Feb 12 23:59:48 2012] XMMSAS bgd. selection expression = annulus(31776.570120, 28420.128000, 362.140010, 724.280021, X, Y)
[Sun Feb 12 23:59:48 2012] Writing fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src2.gif
[Mon Feb 13 00:00:22 2012] Mean detx,y = (-5051.71, -291.63) 
[Mon Feb 13 00:00:23 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 00:00:28 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 00:00:28 2012] Setting source spectrum file to fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 13 00:00:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Feb 13 00:05:47 2012] Not generating rmf since there are only 43 counts
[Mon Feb 13 00:05:47 2012] rmf not generated due to insufficient counts
[Mon Feb 13 00:15:10 2012] Updating aperture counts using extracted products
[Mon Feb 13 00:15:10 2012] Error reading totcts from fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 13 00:15:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 00:15:11 2012] Using photon index=1.80, rate=0.0041, arf fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src2.arf
[Mon Feb 13 00:15:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 00:15:11 2012] Updating source flux to 7.2e-14
[Mon Feb 13 00:15:21 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting