[Sun Feb 12 18:03:13 2012] Detection parameters:
  Position = (311.3, 317.8) = 16 25 46.04 -8 30 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 615.1 +/- 29.5
  Background counts = 5.9
  Rate = 0.06 +/- 0.003

[Sun Feb 12 18:03:13 2012] Off-axis axis estimate = 1.68'
[Sun Feb 12 19:10:54 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 19:10:54 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Feb 12 19:10:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Sun Feb 12 19:10:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun Feb 12 19:45:52 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 12 19:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 19:45:52 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 12 19:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 19:45:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:45:53 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 12 19:45:53 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 12 19:45:53 2012] Fit fullrun_mos2_xmm0650383001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 12 19:46:01 2012] Spatial fit model total counts = 1110.670000, observed total counts = 1110.000000
[Sun Feb 12 19:46:01 2012] Offset between fit and detection position for source 1 = 0.682821 pixels
[Sun Feb 12 19:46:01 2012] 1046.407000 total counts/ 536.805000 bgd. counts: snr = 21.994943
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.682821 pixels
  Position = (310.6, 317.5) = 16 25 46.23 -8 30 58.2
  Extent = 9.5 (8.4-10.8)", rotation angle = 0
  Source counts = 509.6 +/- 32.3
  Background counts = 536.8
  Rate = 0.05 +/- 0.003
[Sun Feb 12 19:46:01 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:46:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:46:01 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:46:01 2012] Source does appear to be extended
[Sun Feb 12 19:46:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:46:01 2012] Source is confused with source 4
[Sun Feb 12 19:46:01 2012] Source is confused with source 3
[Sun Feb 12 20:48:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 20:48:57 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Sun Feb 12 20:48:57 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.874
[Sun Feb 12 20:48:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.45"
[Sun Feb 12 21:16:00 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 12 21:16:00 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 12 21:16:00 2012] Fit fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Feb 12 21:16:01 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 12 21:16:01 2012] fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 12 21:16:01 2012] Fit fullrun_mos2_xmm0650383001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 12 21:16:08 2012] Spatial fit model total counts = 1234.000000, observed total counts = 1234.000000
[Sun Feb 12 21:16:08 2012] Offset between fit and detection position for source 1 = 0.212234 pixels
[Sun Feb 12 21:16:08 2012] 1175.951000 total counts/ 589.384000 bgd. counts: snr = 24.161197
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.212234 pixels
  Position = (310.4, 317.5) = 16 25 46.29 -8 30 58.2
  Extent = 10.5 (9.4-12.1)", rotation angle = 0
  Source counts = 586.6 +/- 34.3
  Background counts = 589.4
  Rate = 0.06 +/- 0.003
[Sun Feb 12 21:16:08 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 21:16:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 21:16:08 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 21:16:08 2012] Source does appear to be extended
[Sun Feb 12 21:16:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 23:59:48 2012] XMMSAS src. selection expression = ellipse(26959.100400, 27574.825800, 628.746018, 628.746018, 0.000000, X, Y)
[Sun Feb 12 23:59:48 2012] Writing source region out to fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 12 23:59:48 2012] Extracting stamp from image fullrun_mos2_xmm0650383001_pi300-10000_cl_sm2.00.img.gz, (274, 281) - (347, 354)
[Sun Feb 12 23:59:48 2012] XMMSAS bgd. selection expression = annulus(26959.100400, 27574.825800, 1047.910030, 2095.820060, X, Y) && !ellipse(26686.667969, 26806.202698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27625.068000, 27591.363600, 926.488027, 313.282409, 90.000000, X, Y) && !ellipse(26422.568000, 28038.542000, 1189.912034, 1189.912034, 0.000000, X, Y) && !ellipse(28103.380981, 28041.640930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28348.950000, 26500.576000, 1189.848034, 1189.848034, 0.000000, X, Y) && !ellipse(28230.166595, 27628.568817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.142000, 29456.120000, 1241.240036, 1241.240036, 0.000000, X, Y)
[Sun Feb 12 23:59:48 2012] Writing fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src1.gif
[Sun Feb 12 23:59:49 2012] Mean detx,y = (-120.77, -189.56) 
[Sun Feb 12 23:59:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 23:59:58 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 23:59:58 2012] Setting source spectrum file to fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 12 23:59:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 13 00:15:10 2012] Updating aperture counts using extracted products
[Mon Feb 13 00:15:10 2012] Error reading totcts from fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 00:15:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 00:15:11 2012] Using photon index=1.80, rate=0.0552, arf fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 00:15:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 00:15:11 2012] Updating source flux to 5.9e-13
[Mon Feb 13 00:15:21 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Feb 13 00:15:33 2012] Reading fit data from xmm0650383001/analysis//spectral/fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 13 00:15:33 2012] Spectral fit parameter nH value = 2.56366e+21
[Mon Feb 13 00:15:33 2012] Spectral fit parameter PhoIndex value = 2.11562
[Mon Feb 13 00:15:33 2012] Failed to get F(0.3-8.0) from xmm0650383001/analysis//spectral/fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 00:15:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 00:15:33 2012] Using Nh = 2.6e+21, photon index=2.12, rate=0.0552, arf fullrun_mos2_xmm0650383001_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 00:15:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 00:15:33 2012] Updating source flux to 6.3e-13