[Mon Feb 20 13:52:47 2012] Detection parameters:
  Position = (290.0, 313.9) = 15 52 1.73 -2 8 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.8 +/- 8.2
  Background counts = 3.6
  Rate = 0.005 +/- 0.001

[Mon Feb 20 13:52:47 2012] Off-axis axis estimate = 1.28'
[Mon Feb 20 15:21:35 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:21:35 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Mon Feb 20 15:21:35 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Mon Feb 20 15:21:35 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.07"
[Mon Feb 20 15:58:38 2012] fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_src10.ximg exists
[Mon Feb 20 15:58:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_src10.csv
[Mon Feb 20 15:58:38 2012] fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Feb 20 15:58:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_src10.csv
[Mon Feb 20 15:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:58:38 2012] fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Feb 20 15:58:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Feb 20 15:58:38 2012] fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Feb 20 15:58:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Feb 20 15:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:58:51 2012] Warning, spatial fit 10 centroid is now closest to src. 3
[Mon Feb 20 15:58:51 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 15:58:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 15:58:51 2012] Assessing source extent using major
[Mon Feb 20 15:58:51 2012] Source does appear to be extended
[Mon Feb 20 15:58:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 17:18:04 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 17:18:04 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Mon Feb 20 17:18:04 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Mon Feb 20 17:18:04 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.07"
[Mon Feb 20 18:01:22 2012] fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_src8.ximg exists
[Mon Feb 20 18:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_src8.csv
[Mon Feb 20 18:01:22 2012] fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Feb 20 18:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_src8.csv
[Mon Feb 20 18:01:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 18:01:22 2012] fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Feb 20 18:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Feb 20 18:01:22 2012] fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Feb 20 18:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Feb 20 18:01:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 18:01:35 2012] Spatial fit model total counts = 25.577300, observed total counts = 277.000000
[Mon Feb 20 18:01:35 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Feb 20 18:01:35 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:01:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:01:35 2012] Assessing source extent using major
[Mon Feb 20 18:01:35 2012] Source does appear to be extended
[Mon Feb 20 18:01:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 18:53:44 2012] XMMSAS src. selection expression = ellipse(25177.777649, 27264.293488, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 20 18:53:44 2012] Writing source region out to fullrun_mos2_xmm0650382901_pi300-10000_pass1_cl_src9_src.reg
[Mon Feb 20 18:53:44 2012] Extracting stamp from image fullrun_mos2_xmm0650382901_pi300-10000_cl_sm2.00.img.gz, (252, 276) - (327, 351)
[Mon Feb 20 18:53:44 2012] XMMSAS bgd. selection expression = annulus(25177.777649, 27264.293488, 1087.500000, 2175.000000, X, Y) && !ellipse(26038.206000, 27633.881200, 728.724821, 728.724821, 0.000000, X, Y) && !ellipse(26169.574000, 27640.374000, 1110.040032, 688.180020, 355.400880, X, Y) && !ellipse(26076.583000, 28057.974000, 1207.040035, 1207.040035, 0.000000, X, Y) && !ellipse(26506.885315, 26332.295898, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 18:53:44 2012] Writing fullrun_mos2_xmm0650382901_pi300-10000_pass1_cl_src9.gif
[Mon Feb 20 18:55:41 2012] Mean detx,y = (1355.58, -75.29) 
[Mon Feb 20 18:55:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 18:55:53 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 18:55:53 2012] Setting source spectrum file to fullrun_mos2_xmm0650382901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Feb 20 18:55:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650382901_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Feb 20 19:06:16 2012] Not generating rmf since there are only 32 counts
[Mon Feb 20 19:06:16 2012] rmf not generated due to insufficient counts
[Mon Feb 20 19:06:36 2012] Updating aperture counts using extracted products
[Mon Feb 20 19:06:36 2012] Error reading totcts from fullrun_mos2_xmm0650382901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Feb 20 19:06:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 19:06:36 2012] Using photon index=1.80, rate=0.00516, arf fullrun_mos2_xmm0650382901_pi300-10000_pass1_cl_src9.arf
[Mon Feb 20 19:06:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 19:06:36 2012] Updating source flux to 5.8e-14
[Mon Feb 20 19:06:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting