[Mon Feb 20 13:52:09 2012] Detection parameters:
  Position = (306.3, 309.2) = 15 51 56.99 -2 8 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.0 +/- 8.8
  Background counts = 3.8
  Rate = 0.006 +/- 0.001

[Mon Feb 20 13:52:09 2012] Off-axis axis estimate = 0.97'
[Mon Feb 20 14:40:01 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 14:40:01 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Mon Feb 20 14:40:01 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.916
[Mon Feb 20 14:40:01 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 6.91"
[Mon Feb 20 15:21:34 2012] fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_src4.ximg exists
[Mon Feb 20 15:21:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_src4.csv
[Mon Feb 20 15:21:34 2012] fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Feb 20 15:21:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_src4.csv
[Mon Feb 20 15:21:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:21:35 2012] fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Feb 20 15:21:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Feb 20 15:21:35 2012] fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Feb 20 15:21:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Feb 20 15:21:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650382901_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:58:47 2012] Spatial fit model total counts = 374.369000, observed total counts = 424.000000
[Mon Feb 20 15:58:47 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Feb 20 15:58:47 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 15:58:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 15:58:47 2012] Assessing source extent using major
[Mon Feb 20 15:58:47 2012] Source does appear to be extended
[Mon Feb 20 15:58:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 16:38:18 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 16:38:18 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Mon Feb 20 16:38:18 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.916
[Mon Feb 20 16:38:18 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.91"
[Mon Feb 20 17:18:04 2012] fullrun_mos1_xmm0650382901_pi300-10000_cl_pass1_src4.ximg exists
[Mon Feb 20 17:18:04 2012] fullrun_mos1_xmm0650382901_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Feb 20 17:18:04 2012] Fit fullrun_mos1_xmm0650382901_pi300-10000_cl_pass1_src4 appears to have run properly
[Mon Feb 20 17:18:04 2012] fullrun_mos1_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Feb 20 17:18:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Feb 20 17:18:04 2012] fullrun_mos1_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Feb 20 17:18:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Feb 20 17:18:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650382901_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 18:01:31 2012] Source 5 is offset by 5.009833 and -7.113740 pixels which is larger than
2 X fitted extent = 5.419311 x 4.298851, not incorporating fit results
[Mon Feb 20 18:01:31 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:01:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:01:31 2012] Assessing source extent using major
[Mon Feb 20 18:01:31 2012] Source does appear to be extended
[Mon Feb 20 18:01:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 18:44:33 2012] XMMSAS src. selection expression = ellipse(26599.479462, 26855.644653, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 20 18:44:33 2012] Writing source region out to fullrun_mos1_xmm0650382901_pi300-10000_pass1_cl_src5_src.reg
[Mon Feb 20 18:44:33 2012] Extracting stamp from image fullrun_mos1_xmm0650382901_pi300-10000_cl_sm2.00.img.gz, (269, 272) - (344, 347)
[Mon Feb 20 18:44:33 2012] XMMSAS bgd. selection expression = annulus(26599.479462, 26855.644653, 1087.500000, 2175.000000, X, Y) && !ellipse(26155.629860, 27645.337800, 862.416025, 862.416025, 0.000000, X, Y) && !ellipse(25634.699200, 29003.432000, 1204.608035, 1204.608035, 0.000000, X, Y) && !ellipse(25113.167511, 27359.874542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24525.140000, 27105.862000, 1136.912033, 1136.912033, 0.000000, X, Y)
[Mon Feb 20 18:44:33 2012] Writing fullrun_mos1_xmm0650382901_pi300-10000_pass1_cl_src5.gif
[Mon Feb 20 18:45:28 2012] Mean detx,y = (-493.34, -509.79) 
[Mon Feb 20 18:45:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 18:45:44 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 18:45:45 2012] Setting source spectrum file to fullrun_mos1_xmm0650382901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Feb 20 18:45:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650382901_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Feb 20 18:53:10 2012] Not generating rmf since there are only 40 counts
[Mon Feb 20 18:53:10 2012] rmf not generated due to insufficient counts
[Mon Feb 20 19:06:35 2012] Updating aperture counts using extracted products
[Mon Feb 20 19:06:35 2012] Error reading totcts from fullrun_mos1_xmm0650382901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Feb 20 19:06:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 19:06:35 2012] Using photon index=1.80, rate=0.00625, arf fullrun_mos1_xmm0650382901_pi300-10000_pass1_cl_src5.arf
[Mon Feb 20 19:06:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 19:06:35 2012] Updating source flux to 6.3e-14
[Mon Feb 20 19:06:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting