[Fri Mar 30 10:15:44 2012] Detection parameters:
  Position = (315.2, 257.9) = 11 42 20.99 58 30 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.4 +/- 17.2
  Background counts = 24.4
  Rate = 0.03 +/- 0.004

[Fri Mar 30 10:15:45 2012] Off-axis axis estimate = 3.18'
[Fri Mar 30 10:18:42 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 10:18:42 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Fri Mar 30 10:18:42 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.910
[Fri Mar 30 10:18:42 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.02"
[Fri Mar 30 14:00:06 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src28.ximg exists
[Fri Mar 30 14:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src28.csv
[Fri Mar 30 14:00:06 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Mar 30 14:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src28.csv
[Fri Mar 30 14:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 14:00:07 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Mar 30 14:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Mar 30 14:00:07 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Mar 30 14:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Mar 30 14:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 20:04:07 2012] Source 28 is offset by -3.029674 and -0.439857 pixels which is larger than
2 X fitted extent = 1.575379 x 1.575379, not incorporating fit results
[Fri Mar 30 20:04:07 2012] Spatial fit model total counts = 559.034000, observed total counts = 413.000000
[Fri Mar 30 20:04:07 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 20:04:07 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 20:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 20:04:07 2012] Assessing source extent using major
[Fri Mar 30 20:04:07 2012] Source does appear to be extended
[Fri Mar 30 20:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 20:04:07 2012] Source is confused with source 30
[Fri Mar 30 20:04:42 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 20:04:42 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Fri Mar 30 20:04:42 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.910
[Fri Mar 30 20:04:42 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 8.02"
[Fri Mar 30 23:09:47 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src24.ximg exists
[Fri Mar 30 23:09:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src24.csv
[Fri Mar 30 23:09:47 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Mar 30 23:09:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src24.csv
[Fri Mar 30 23:09:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:09:47 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Mar 30 23:09:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Mar 30 23:09:47 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Mar 30 23:09:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Mar 30 23:09:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 03:33:53 2012] Source 28 is offset by 1.035522 and 0.899408 pixels which is larger than
2 X fitted extent = 0.893968 x 0.893968, not incorporating fit results
[Sat Mar 31 03:33:53 2012] Source 28 is offset by -2.996041 and -0.434868 pixels which is larger than
2 X fitted extent = 1.513885 x 1.513885, not incorporating fit results
[Sat Mar 31 03:33:53 2012] Spatial fit model total counts = 559.448000, observed total counts = 413.000000
[Sat Mar 31 03:33:53 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 31 03:33:53 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 03:33:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 03:33:53 2012] Assessing source extent using major
[Sat Mar 31 03:33:53 2012] Source does appear to be extended
[Sat Mar 31 03:33:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:34:25 2012] XMMSAS src. selection expression = ellipse(27372.074402, 22385.836456, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 03:34:25 2012] Writing source region out to fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src28_src.reg
[Sat Mar 31 03:34:25 2012] Extracting stamp from image fullrun_pn_xmm0650382201_pi300-10000_cl_sm2.00.img.gz, (278, 220) - (353, 295)
[Sat Mar 31 03:34:25 2012] XMMSAS bgd. selection expression = annulus(27372.074402, 22385.836456, 1087.500000, 2175.000000, X, Y) && !ellipse(25208.118800, 25142.976000, 996.256029, 996.256029, 0.000000, X, Y) && !ellipse(25811.996000, 24933.768000, 2184.624063, 2184.624063, 0.000000, X, Y) && !ellipse(27616.488434, 24733.238129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28884.328644, 24645.138947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24701.189270, 24386.985138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27385.970200, 20825.232000, 628.739218, 628.739218, 0.000000, X, Y) && !ellipse(26302.063080, 24227.351501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27299.467316, 24230.927826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27291.223450, 23728.707794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26749.631989, 23704.698364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28226.792053, 23877.121277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.502045, 23790.785034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.574402, 23440.830933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28166.822906, 23129.425201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25794.002000, 23038.268000, 790.736023, 790.736023, 0.000000, X, Y) && !ellipse(26711.354431, 22777.365662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.951477, 23092.767212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28253.095428, 22077.498611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26308.246643, 22177.250717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26901.146000, 22114.552000, 1348.104039, 1348.104039, 0.000000, X, Y) && !ellipse(27433.487885, 21369.257599, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:34:25 2012] Writing fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src28.gif
[Sat Mar 31 03:54:07 2012] Mean detx,y = (1326.02, -1562.85) 
[Sat Mar 31 03:54:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:54:38 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:54:38 2012] Setting source spectrum file to fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Mar 31 03:54:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Mar 31 05:03:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 05:03:09 2012] rmf not generated due to insufficient counts
[Sat Mar 31 06:00:49 2012] Updating aperture counts using extracted products
[Sat Mar 31 06:00:49 2012] Error reading totcts from fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Mar 31 06:00:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 06:00:51 2012] Using photon index=1.80, rate=0.0343, arf fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src28.arf
[Sat Mar 31 06:00:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 06:00:51 2012] Updating source flux to 9.3e-14
[Sat Mar 31 06:01:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting