[Fri Mar 30 10:15:43 2012] Detection parameters:
  Position = (284.5, 280.9) = 11 42 38.04 58 32 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.4 +/- 10.8
  Background counts = 23.2
  Rate = 0.008 +/- 0.002

[Fri Mar 30 10:15:45 2012] Off-axis axis estimate = 1.63'
[Fri Mar 30 10:18:42 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 10:18:42 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Fri Mar 30 10:18:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Fri Mar 30 10:18:42 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.24"
[Fri Mar 30 14:00:06 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Mar 30 14:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src13.csv
[Fri Mar 30 14:00:06 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Mar 30 14:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src13.csv
[Fri Mar 30 14:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 14:00:07 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Mar 30 14:00:07 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Mar 30 14:00:07 2012] Fit fullrun_pn_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Mar 30 20:04:07 2012] Source 13 is offset by 0.999408 and 4.222933 pixels which is larger than
2 X fitted extent = 0.834018 x 0.834018, not incorporating fit results
[Fri Mar 30 20:04:07 2012] Source 13 is offset by 0.239394 and -0.892562 pixels which is larger than
2 X fitted extent = 0.845025 x 0.845025, not incorporating fit results
[Fri Mar 30 20:04:07 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 20:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 20:04:07 2012] Assessing source extent using major
[Fri Mar 30 20:04:07 2012] Source does appear to be extended
[Fri Mar 30 20:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 20:04:42 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 20:04:42 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Fri Mar 30 20:04:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Fri Mar 30 20:04:42 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.24"
[Fri Mar 30 23:09:46 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src10.ximg exists
[Fri Mar 30 23:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src10.csv
[Fri Mar 30 23:09:46 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Mar 30 23:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src10.csv
[Fri Mar 30 23:09:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:09:47 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Mar 30 23:09:47 2012] fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Mar 30 23:09:47 2012] Fit fullrun_pn_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Mar 31 03:33:53 2012] Source 13 is offset by 0.998440 and 4.221117 pixels which is larger than
2 X fitted extent = 0.846667 x 0.846667, not incorporating fit results
[Sat Mar 31 03:33:53 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 03:33:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 03:33:53 2012] Assessing source extent using major
[Sat Mar 31 03:33:53 2012] Source does appear to be extended
[Sat Mar 31 03:33:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:33:53 2012] Source is confused with source 10
[Sat Mar 31 03:34:24 2012] XMMSAS src. selection expression = ellipse(24701.189270, 24386.985138, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 03:34:24 2012] Writing source region out to fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src13_src.reg
[Sat Mar 31 03:34:24 2012] Extracting stamp from image fullrun_pn_xmm0650382201_pi300-10000_cl_sm2.00.img.gz, (247, 243) - (322, 318)
[Sat Mar 31 03:34:24 2012] XMMSAS bgd. selection expression = annulus(24701.189270, 24386.985138, 1087.500000, 2175.000000, X, Y) && !ellipse(26527.791016, 25848.830994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25144.480000, 25668.344000, 1079.656031, 1079.656031, 0.000000, X, Y) && !ellipse(25208.118800, 25142.976000, 996.256029, 996.256029, 0.000000, X, Y) && !ellipse(25811.996000, 24933.768000, 2184.624063, 2184.624063, 0.000000, X, Y) && !ellipse(27616.488434, 24733.238129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26302.063080, 24227.351501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27299.467316, 24230.927826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27291.223450, 23728.707794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26749.631989, 23704.698364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.502045, 23790.785034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.574402, 23440.830933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25794.002000, 23038.268000, 790.736023, 790.736023, 0.000000, X, Y) && !ellipse(26711.354431, 22777.365662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.951477, 23092.767212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27372.074402, 22385.836456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26308.246643, 22177.250717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26901.146000, 22114.552000, 1348.104039, 1348.104039, 0.000000, X, Y) && !ellipse(27433.487885, 21369.257599, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:34:24 2012] Writing fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src13.gif
[Sat Mar 31 03:43:21 2012] Mean detx,y = (845.53, 1749.44) 
[Sat Mar 31 03:43:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:43:51 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:43:52 2012] Setting source spectrum file to fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Mar 31 03:43:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Mar 31 04:34:39 2012] Not generating rmf since there are only 41 counts
[Sat Mar 31 04:34:39 2012] rmf not generated due to insufficient counts
[Sat Mar 31 06:00:49 2012] Updating aperture counts using extracted products
[Sat Mar 31 06:00:49 2012] Error reading totcts from fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Mar 31 06:00:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 06:00:50 2012] Using photon index=1.80, rate=0.00806, arf fullrun_pn_xmm0650382201_pi300-10000_pass1_cl_src13.arf
[Sat Mar 31 06:00:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 06:00:50 2012] Updating source flux to 2e-14
[Sat Mar 31 06:01:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting