[Fri Mar 30 10:17:11 2012] Detection parameters:
  Position = (291.2, 268.9) = 11 42 34.31 58 31 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.5 +/- 8.5
  Background counts = 5.5
  Rate = 0.005 +/- 0.001

[Fri Mar 30 10:17:11 2012] Off-axis axis estimate = 2.20'
[Fri Mar 30 17:10:32 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 17:10:32 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Fri Mar 30 17:10:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.804
[Fri Mar 30 17:10:32 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.53"
[Fri Mar 30 20:03:52 2012] fullrun_mos2_xmm0650382201_pi300-10000_cl_pass0_src23.ximg exists
[Fri Mar 30 20:03:52 2012] fullrun_mos2_xmm0650382201_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Mar 30 20:03:52 2012] Fit fullrun_mos2_xmm0650382201_pi300-10000_cl_pass0_src23 appears to have run properly
[Fri Mar 30 20:03:53 2012] fullrun_mos2_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Mar 30 20:03:53 2012] fullrun_mos2_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Mar 30 20:03:53 2012] Fit fullrun_mos2_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Mar 30 20:04:26 2012] Warning, spatial fit 23 centroid is now closest to src. 19
[Fri Mar 30 20:04:26 2012] Source 14 is offset by -3.417930 and -0.319770 pixels which is larger than
2 X fitted extent = 0.859591 x 0.859591, not incorporating fit results
[Fri Mar 30 20:04:26 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 20:04:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 20:04:26 2012] Assessing source extent using major
[Fri Mar 30 20:04:26 2012] Source does appear to be extended
[Fri Mar 30 20:04:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 20:04:26 2012] Source is confused with source 19
[Fri Mar 30 20:04:26 2012] Source is confused with source 12
[Sat Mar 31 01:37:19 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 01:37:19 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Sat Mar 31 01:37:19 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.804
[Sat Mar 31 01:37:19 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.53"
[Sat Mar 31 03:33:40 2012] fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_src18.ximg exists
[Sat Mar 31 03:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_src18.csv
[Sat Mar 31 03:33:40 2012] fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Mar 31 03:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_src18.csv
[Sat Mar 31 03:33:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 03:33:40 2012] fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Mar 31 03:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat Mar 31 03:33:40 2012] fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Mar 31 03:33:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat Mar 31 03:33:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 03:34:08 2012] Source 14 is offset by -6.524321 and 0.976504 pixels which is larger than
2 X fitted extent = 4.930851 x 4.930851, not incorporating fit results
[Sat Mar 31 03:34:08 2012] Source 14 is offset by -3.547172 and -0.319770 pixels which is larger than
2 X fitted extent = 1.458483 x 0.842032, not incorporating fit results
[Sat Mar 31 03:34:08 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 03:34:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 03:34:08 2012] Assessing source extent using major
[Sat Mar 31 03:34:08 2012] Source does appear to be extended
[Sat Mar 31 03:34:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 05:50:07 2012] XMMSAS src. selection expression = ellipse(25285.216064, 23349.628021, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 05:50:07 2012] Writing source region out to fullrun_mos2_xmm0650382201_pi300-10000_pass1_cl_src14_src.reg
[Sat Mar 31 05:50:07 2012] Extracting stamp from image fullrun_mos2_xmm0650382201_pi300-10000_cl_sm2.00.img.gz, (254, 231) - (329, 306)
[Sat Mar 31 05:50:07 2012] XMMSAS bgd. selection expression = annulus(25285.216064, 23349.628021, 1087.500000, 2175.000000, X, Y) && !ellipse(27087.176483, 23867.972046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26742.290833, 22975.951233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27161.992554, 22789.390289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26091.105072, 24830.993652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26548.981400, 22126.544000, 1120.160032, 1120.160032, 0.000000, X, Y) && !ellipse(27090.710327, 24996.906433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27939.127594, 23348.804962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26477.361389, 25267.533569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.478577, 22312.146118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.810974, 22309.722076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25370.301788, 22752.286255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.033417, 24895.975494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25103.017334, 23921.672668, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 05:50:07 2012] Writing fullrun_mos2_xmm0650382201_pi300-10000_pass1_cl_src14.gif
[Sat Mar 31 05:56:01 2012] Mean detx,y = (-1321.05, -812.88) 
[Sat Mar 31 05:56:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:56:14 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:56:14 2012] Setting source spectrum file to fullrun_mos2_xmm0650382201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Mar 31 05:56:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650382201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Mar 31 06:00:09 2012] Not generating rmf since there are only 34 counts
[Sat Mar 31 06:00:09 2012] rmf not generated due to insufficient counts
[Sat Mar 31 06:00:55 2012] Updating aperture counts using extracted products
[Sat Mar 31 06:00:55 2012] Error reading totcts from fullrun_mos2_xmm0650382201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Mar 31 06:00:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 06:00:56 2012] Using photon index=1.80, rate=0.00468, arf fullrun_mos2_xmm0650382201_pi300-10000_pass1_cl_src14.arf
[Sat Mar 31 06:00:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 06:00:56 2012] Updating source flux to 4.5e-14
[Sat Mar 31 06:00:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Mar 31 06:01:00 2012] xmm0650382201/analysis//spectral/fullrun_mos2_xmm0650382201_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete