[Fri Mar 30 10:16:29 2012] Detection parameters:
  Position = (304.1, 287.0) = 11 42 27.14 58 32 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.0 +/- 12.0
  Background counts = 8.2
  Rate = 0.01 +/- 0.002

[Fri Mar 30 10:16:30 2012] Off-axis axis estimate = 0.93'
[Fri Mar 30 14:00:08 2012] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 14:00:08 2012] Initial guess for spatial extent in simple fitting = 6.89"
[Fri Mar 30 14:00:08 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.921
[Fri Mar 30 14:00:08 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 6.89"
[Fri Mar 30 17:10:30 2012] fullrun_mos1_xmm0650382201_pi300-10000_cl_pass0_src9.ximg exists
[Fri Mar 30 17:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382201_pi300-10000_cl_pass0_src9.csv
[Fri Mar 30 17:10:30 2012] fullrun_mos1_xmm0650382201_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Mar 30 17:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382201_pi300-10000_cl_pass0_src9.csv
[Fri Mar 30 17:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650382201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650382201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 17:10:31 2012] fullrun_mos1_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Mar 30 17:10:31 2012] fullrun_mos1_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Mar 30 17:10:31 2012] Fit fullrun_mos1_xmm0650382201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Mar 30 20:04:17 2012] Spatial fit model total counts = 361.146000, observed total counts = 489.000000
[Fri Mar 30 20:04:17 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 20:04:17 2012] Spatial fit model total counts = 543.681000, observed total counts = 528.000000
[Fri Mar 30 20:04:17 2012] Offset between fit and detection position for source 5 = 2.766896 pixels
[Fri Mar 30 20:04:17 2012] Warning, changing simple spatial fit ID from 9 to 7
[Fri Mar 30 20:04:17 2012] 523.529700 total counts/ 454.834000 bgd. counts: snr = 3.221092
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.766896 pixels
  Position = (306.2, 285.2) = 11 42 25.95 58 32 26.7
  Extent = 14.2 (14.0-14.3)", rotation angle = 0
  Source counts = 68.7 +/- 22.9
  Background counts = 454.8
  Rate = 0.009 +/- 0.003
[Fri Mar 30 20:04:17 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 20:04:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 20:04:17 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 20:04:17 2012] Source does appear to be extended
[Fri Mar 30 20:04:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 20:04:17 2012] Source is confused with source 7
[Fri Mar 30 23:09:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:09:48 2012] Initial guess for spatial extent in simple fitting = 14.24"
[Fri Mar 30 23:09:48 2012] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.124
[Fri Mar 30 23:09:48 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 14.24"
[Sat Mar 31 01:37:18 2012] fullrun_mos1_xmm0650382201_pi300-10000_cl_pass1_src6.ximg exists
[Sat Mar 31 01:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382201_pi300-10000_cl_pass1_src6.csv
[Sat Mar 31 01:37:18 2012] fullrun_mos1_xmm0650382201_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Mar 31 01:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650382201_pi300-10000_cl_pass1_src6.csv
[Sat Mar 31 01:37:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650382201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650382201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 01:37:18 2012] fullrun_mos1_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Mar 31 01:37:18 2012] fullrun_mos1_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Mar 31 01:37:18 2012] Fit fullrun_mos1_xmm0650382201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Mar 31 03:34:01 2012] Warning, spatial fit 6 centroid is now closest to src. 19
[Sat Mar 31 03:34:01 2012] Source 5 is offset by 1.609287 and -5.273697 pixels which is larger than
2 X fitted extent = 0.800538 x 0.800538, not incorporating fit results
[Sat Mar 31 03:34:01 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 03:34:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 03:34:01 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 03:34:01 2012] Source does appear to be extended
[Sat Mar 31 03:34:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 05:38:29 2012] XMMSAS src. selection expression = ellipse(26594.614000, 24766.858000, 854.136025, 854.136025, 0.000000, X, Y)
[Sat Mar 31 05:38:29 2012] Writing source region out to fullrun_mos1_xmm0650382201_pi300-10000_pass1_cl_src5_src.reg
[Sat Mar 31 05:38:29 2012] Extracting stamp from image fullrun_mos1_xmm0650382201_pi300-10000_cl_sm2.00.img.gz, (257, 236) - (355, 334)
[Sat Mar 31 05:38:29 2012] XMMSAS bgd. selection expression = annulus(26594.614000, 24766.858000, 1423.560041, 2847.120082, X, Y) && !ellipse(26591.519684, 22824.933167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26774.930000, 22473.426000, 1288.576037, 1288.576037, 0.000000, X, Y) && !ellipse(26876.632660, 24411.544159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27481.764282, 24543.135376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.469788, 22061.571091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27880.321350, 23967.620605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28431.529327, 23344.697632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25940.416229, 24660.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26991.266205, 25247.174805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25066.608917, 24224.189362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.240051, 24311.515930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25953.340912, 25743.811310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25609.777466, 22337.631744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.979828, 24635.599426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.133270, 22707.806549, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 05:38:29 2012] Writing fullrun_mos1_xmm0650382201_pi300-10000_pass1_cl_src5.gif
[Sat Mar 31 05:40:28 2012] Mean detx,y = (-212.30, -630.46) 
[Sat Mar 31 05:40:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:40:43 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:40:43 2012] Setting source spectrum file to fullrun_mos1_xmm0650382201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 31 05:40:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650382201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Mar 31 05:47:33 2012] Not generating rmf since there are only 68 counts
[Sat Mar 31 05:47:33 2012] rmf not generated due to insufficient counts
[Sat Mar 31 06:00:52 2012] Updating aperture counts using extracted products
[Sat Mar 31 06:00:52 2012] Error reading totcts from fullrun_mos1_xmm0650382201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 31 06:00:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 06:00:53 2012] Using photon index=1.80, rate=0.00902, arf fullrun_mos1_xmm0650382201_pi300-10000_pass1_cl_src5.arf
[Sat Mar 31 06:00:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 06:00:53 2012] Updating source flux to 8.7e-14
[Sat Mar 31 06:00:58 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Sat Mar 31 06:00:58 2012] Flag p found in src. 5 procflags, skipping spectral fitting
[Sat Mar 31 06:00:58 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Sat Mar 31 06:00:58 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Mar 31 06:00:59 2012] xmm0650382201/analysis//spectral/fullrun_mos1_xmm0650382201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete