[Sun Mar 25 10:18:54 2012] Detection parameters:
  Position = (257.5, 460.0) = 6 11 55.50 -30 24 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.5 +/- 9.5
  Background counts = 6.3
  Rate = 0.007 +/- 0.001

[Sun Mar 25 10:18:55 2012] Off-axis axis estimate = 12.09'
[Sun Mar 25 13:08:44 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 13:08:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 13:08:44 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Sun Mar 25 13:08:44 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.926
[Sun Mar 25 13:08:44 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.47"
[Sun Mar 25 14:08:25 2012] fullrun_mos2_xmm0650381501_pi300-10000_cl_pass0_src13.ximg exists
[Sun Mar 25 14:08:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650381501_pi300-10000_cl_pass0_src13.csv
[Sun Mar 25 14:08:25 2012] fullrun_mos2_xmm0650381501_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Mar 25 14:08:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650381501_pi300-10000_cl_pass0_src13.csv
[Sun Mar 25 14:08:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650381501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650381501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 14:08:25 2012] fullrun_mos2_xmm0650381501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Mar 25 14:08:25 2012] fullrun_mos2_xmm0650381501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Mar 25 14:08:25 2012] Fit fullrun_mos2_xmm0650381501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Mar 25 14:08:50 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.895261 pixels away
[Sun Mar 25 14:08:50 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:08:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:08:50 2012] Assessing source extent using major
[Sun Mar 25 14:08:50 2012] Source does appear to be extended
[Sun Mar 25 14:08:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 16:50:09 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 16:50:09 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Sun Mar 25 16:50:09 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.926
[Sun Mar 25 16:50:09 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.47"
[Sun Mar 25 17:29:28 2012] fullrun_mos2_xmm0650381501_pi300-10000_cl_pass1_src11.ximg exists
[Sun Mar 25 17:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650381501_pi300-10000_cl_pass1_src11.csv
[Sun Mar 25 17:29:28 2012] fullrun_mos2_xmm0650381501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Mar 25 17:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650381501_pi300-10000_cl_pass1_src11.csv
[Sun Mar 25 17:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650381501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650381501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 17:29:28 2012] fullrun_mos2_xmm0650381501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Mar 25 17:29:28 2012] fullrun_mos2_xmm0650381501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Mar 25 17:29:28 2012] Fit fullrun_mos2_xmm0650381501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Mar 25 17:29:46 2012] Spatial fit model total counts = 124.994000, observed total counts = 125.000000
[Sun Mar 25 17:29:46 2012] Offset between fit and detection position for source 1 = 0.260121 pixels
[Sun Mar 25 17:29:46 2012] 123.453000 total counts/ 89.362500 bgd. counts: snr = 3.606249
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.260121 pixels
  Position = (257.2, 460.1) = 6 11 55.59 -30 24 17.2
  Extent = 5.8 (3.8-8.8)", rotation angle = 0
  Source counts = 34.1 +/- 11.1
  Background counts = 89.4
  Rate = 0.005 +/- 0.001
[Sun Mar 25 17:29:46 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 17:29:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 17:29:46 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 17:29:46 2012] Source does appear to be extended
[Sun Mar 25 17:29:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 22:00:54 2012] XMMSAS src. selection expression = ellipse(22328.396340, 39976.036800, 346.655410, 346.655410, 0.000000, X, Y)
[Sun Mar 25 22:00:54 2012] Writing source region out to fullrun_mos2_xmm0650381501_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 25 22:00:54 2012] Extracting stamp from image fullrun_mos2_xmm0650381501_pi300-10000_cl_sm2.00.img.gz, (237, 440) - (277, 480)
[Sun Mar 25 22:00:54 2012] XMMSAS bgd. selection expression = annulus(22328.396340, 39976.036800, 577.759017, 1155.518033, X, Y)
[Sun Mar 25 22:00:54 2012] Writing fullrun_mos2_xmm0650381501_pi300-10000_pass1_cl_src1.gif
[Sun Mar 25 22:04:13 2012] Mean detx,y = (-8215.04, -12677.11) 
[Sun Mar 25 22:04:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 22:04:26 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 22:04:26 2012] Setting source spectrum file to fullrun_mos2_xmm0650381501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 25 22:04:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650381501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 25 22:07:15 2012] Not generating rmf since there are only 34 counts
[Sun Mar 25 22:07:15 2012] rmf not generated due to insufficient counts
[Sun Mar 25 22:21:46 2012] Updating aperture counts using extracted products
[Sun Mar 25 22:21:46 2012] Error reading totcts from fullrun_mos2_xmm0650381501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 25 22:21:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 22:21:46 2012] Using photon index=1.80, rate=0.00457, arf fullrun_mos2_xmm0650381501_pi300-10000_pass1_cl_src1.arf
[Sun Mar 25 22:21:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 22:21:46 2012] Updating source flux to 1.5e-13
[Sun Mar 25 22:22:31 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Mar 25 22:22:46 2012] xmm0650381501/analysis//spectral/fullrun_mos2_xmm0650381501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete