[Sun Mar 25 10:18:06 2012] Detection parameters:
  Position = (190.6, 234.9) = 6 12 18.10 -30 40 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.1 +/- 17.5
  Background counts = 9.1
  Rate = 0.04 +/- 0.004

[Sun Mar 25 10:18:07 2012] Off-axis axis estimate = 9.08'
[Sun Mar 25 11:43:10 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:43:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 11:43:10 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Sun Mar 25 11:43:10 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Sun Mar 25 11:43:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.97"
[Sun Mar 25 13:08:43 2012] fullrun_mos1_xmm0650381501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 25 13:08:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650381501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 13:08:43 2012] fullrun_mos1_xmm0650381501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 25 13:08:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650381501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 13:08:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650381501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650381501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 13:08:44 2012] fullrun_mos1_xmm0650381501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 25 13:08:44 2012] fullrun_mos1_xmm0650381501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 25 13:08:44 2012] Fit fullrun_mos1_xmm0650381501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 25 14:08:44 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.721093 pixels away
[Sun Mar 25 14:08:44 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 14:08:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 14:08:44 2012] Assessing source extent using major
[Sun Mar 25 14:08:44 2012] Source does appear to be extended
[Sun Mar 25 14:08:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 15:19:45 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 15:19:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 15:19:45 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Sun Mar 25 15:19:45 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Sun Mar 25 15:19:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.97"
[Sun Mar 25 16:50:09 2012] fullrun_mos1_xmm0650381501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 25 16:50:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650381501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 16:50:09 2012] fullrun_mos1_xmm0650381501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 25 16:50:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650381501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 16:50:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650381501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650381501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 16:50:09 2012] fullrun_mos1_xmm0650381501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 25 16:50:09 2012] fullrun_mos1_xmm0650381501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 25 16:50:09 2012] Fit fullrun_mos1_xmm0650381501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 25 17:29:42 2012] Spatial fit model total counts = 328.867000, observed total counts = 328.000000
[Sun Mar 25 17:29:42 2012] Offset between fit and detection position for source 1 = 0.045919 pixels
[Sun Mar 25 17:29:42 2012] 327.245000 total counts/ 183.360000 bgd. counts: snr = 10.625839
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.045919 pixels
  Position = (190.6, 234.9) = 6 12 18.09 -30 40 36.2
  Extent = 6.1 (5.1-6.8)", rotation angle = 0
  Source counts = 143.9 +/- 18.1
  Background counts = 183.4
  Rate = 0.02 +/- 0.002
[Sun Mar 25 17:29:42 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 17:29:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 17:29:42 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 17:29:42 2012] Source does appear to be extended
[Sun Mar 25 17:29:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 21:18:08 2012] XMMSAS src. selection expression = ellipse(16533.819460, 20392.077400, 363.205210, 363.205210, 0.000000, X, Y)
[Sun Mar 25 21:18:08 2012] Writing source region out to fullrun_mos1_xmm0650381501_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 25 21:18:08 2012] Extracting stamp from image fullrun_mos1_xmm0650381501_pi300-10000_cl_sm2.00.img.gz, (170, 214) - (211, 256)
[Sun Mar 25 21:18:08 2012] XMMSAS bgd. selection expression = annulus(16533.819460, 20392.077400, 605.342017, 1210.684035, X, Y)
[Sun Mar 25 21:18:08 2012] Writing fullrun_mos1_xmm0650381501_pi300-10000_pass1_cl_src1.gif
[Sun Mar 25 21:18:12 2012] Mean detx,y = (7637.41, 4695.01) 
[Sun Mar 25 21:18:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 21:18:33 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 21:18:34 2012] Setting source spectrum file to fullrun_mos1_xmm0650381501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 25 21:18:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650381501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 25 22:21:43 2012] Updating aperture counts using extracted products
[Sun Mar 25 22:21:43 2012] Error reading totcts from fullrun_mos1_xmm0650381501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 25 22:21:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 22:21:44 2012] Using photon index=1.80, rate=0.0192, arf fullrun_mos1_xmm0650381501_pi300-10000_pass1_cl_src1.arf
[Sun Mar 25 22:21:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 22:21:44 2012] Updating source flux to 3.5e-13
[Sun Mar 25 22:22:31 2012] Reading fit data from xmm0650381501/analysis//spectral/fullrun_mos1_xmm0650381501_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 25 22:22:31 2012] Spectral fit parameter nH value = 2.3098e+14
[Sun Mar 25 22:22:31 2012] Spectral fit parameter PhoIndex value = 1.98881
[Sun Mar 25 22:22:31 2012] Failed to get F(0.3-8.0) from xmm0650381501/analysis//spectral/fullrun_mos1_xmm0650381501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 25 22:22:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 22:22:31 2012] Using Nh = 2.3e+14, photon index=1.99, rate=0.0192, arf fullrun_mos1_xmm0650381501_pi300-10000_pass1_cl_src1.arf
[Sun Mar 25 22:22:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 22:22:31 2012] Updating source flux to 3.2e-13