[Tue Dec 27 18:54:03 2011] Detection parameters:
  Position = (302.1, 268.4) = 6 0 6.20 -20 8 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.1 +/- 9.4
  Background counts = 8.8
  Rate = 0.004 +/- 0.0009

[Tue Dec 27 18:54:04 2011] Off-axis axis estimate = 2.19'
[Wed Dec 28 02:29:47 2011] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 02:29:47 2011] Initial guess for spatial extent in simple fitting = 7.52"
[Wed Dec 28 02:29:47 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.006
[Wed Dec 28 02:29:47 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 7.52"
[Wed Dec 28 07:50:27 2011] fullrun_mos2_xmm0650381401_pi300-10000_cl_pass0_src27.ximg exists
[Wed Dec 28 07:50:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650381401_pi300-10000_cl_pass0_src27.csv
[Wed Dec 28 07:50:27 2011] fullrun_mos2_xmm0650381401_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Dec 28 07:50:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650381401_pi300-10000_cl_pass0_src27.csv
[Wed Dec 28 07:50:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650381401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650381401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 07:50:28 2011] fullrun_mos2_xmm0650381401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Dec 28 07:50:28 2011] fullrun_mos2_xmm0650381401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Dec 28 07:50:28 2011] Fit fullrun_mos2_xmm0650381401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Dec 28 07:51:20 2011] Source 28 is offset by 4.867256 and -7.473812 pixels which is larger than
2 X fitted extent = 6.918575 x 6.918575, not incorporating fit results
[Wed Dec 28 07:51:20 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 07:51:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 07:51:20 2011] Assessing source extent using major
[Wed Dec 28 07:51:20 2011] Source does appear to be extended
[Wed Dec 28 07:51:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 07:51:20 2011] Source is confused with source 29
[Wed Dec 28 15:22:08 2011] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:22:08 2011] Initial guess for spatial extent in simple fitting = 7.52"
[Wed Dec 28 15:22:08 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.006
[Wed Dec 28 15:22:08 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 7.52"
[Wed Dec 28 19:38:37 2011] fullrun_mos2_xmm0650381401_pi300-10000_cl_pass1_src21.ximg exists
[Wed Dec 28 19:38:37 2011] fullrun_mos2_xmm0650381401_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Dec 28 19:38:37 2011] Fit fullrun_mos2_xmm0650381401_pi300-10000_cl_pass1_src21 appears to have run properly
[Wed Dec 28 19:38:38 2011] fullrun_mos2_xmm0650381401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Dec 28 19:38:38 2011] fullrun_mos2_xmm0650381401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Dec 28 19:38:38 2011] Fit fullrun_mos2_xmm0650381401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Wed Dec 28 19:39:15 2011] Source 28 is offset by 4.892014 and -7.473812 pixels which is larger than
2 X fitted extent = 6.918575 x 6.918575, not incorporating fit results
[Wed Dec 28 19:39:15 2011] Source 28 is offset by 0.939187 and -6.649140 pixels which is larger than
2 X fitted extent = 3.489136 x 3.489136, not incorporating fit results
[Wed Dec 28 19:39:15 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 19:39:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 19:39:15 2011] Assessing source extent using major
[Wed Dec 28 19:39:15 2011] Source does appear to be extended
[Wed Dec 28 19:39:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 03:53:11 2011] XMMSAS src. selection expression = ellipse(26236.011261, 23306.194397, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 29 03:53:11 2011] Writing source region out to fullrun_mos2_xmm0650381401_pi300-10000_pass1_cl_src28_src.reg
[Thu Dec 29 03:53:11 2011] Extracting stamp from image fullrun_mos2_xmm0650381401_pi300-10000_cl_sm2.00.img.gz, (265, 231) - (340, 306)
[Thu Dec 29 03:53:11 2011] XMMSAS bgd. selection expression = annulus(26236.011261, 23306.194397, 1087.500000, 2175.000000, X, Y) && !ellipse(25670.677620, 24210.794800, 1263.024036, 1263.024036, 0.000000, X, Y) && !ellipse(23382.881753, 25402.262633, 2329.812185, 1024.815725, 350.163941, X, Y) && !ellipse(28504.911200, 24594.113600, 411.420812, 411.420812, 0.000000, X, Y) && !ellipse(23582.936000, 25293.574000, 1003.480029, 1003.480029, 0.000000, X, Y) && !ellipse(25037.897430, 25443.485016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24521.300415, 25710.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24563.443695, 26128.702942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22832.764000, 25374.180000, 1274.160037, 1274.160037, 0.000000, X, Y) && !ellipse(25985.840000, 24998.160000, 1062.680031, 1062.680031, 0.000000, X, Y) && !ellipse(24313.905457, 24120.932617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26757.836029, 23703.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23674.707153, 24245.187988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25733.923981, 23034.125580, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 03:53:11 2011] Writing fullrun_mos2_xmm0650381401_pi300-10000_pass1_cl_src28.gif
[Thu Dec 29 04:17:56 2011] Mean detx,y = (755.61, 795.68) 
[Thu Dec 29 04:17:59 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 04:18:19 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 04:18:19 2011] Setting source spectrum file to fullrun_mos2_xmm0650381401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Dec 29 04:18:19 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0650381401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Dec 29 04:49:19 2011] Not generating rmf since there are only 38 counts
[Thu Dec 29 04:49:19 2011] rmf not generated due to insufficient counts
[Thu Dec 29 04:51:11 2011] Updating aperture counts using extracted products
[Thu Dec 29 04:51:11 2011] Error reading totcts from fullrun_mos2_xmm0650381401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Dec 29 04:51:15 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 04:51:15 2011] Using photon index=1.80, rate=0.00379, arf fullrun_mos2_xmm0650381401_pi300-10000_pass1_cl_src28.arf
[Thu Dec 29 04:51:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 04:51:15 2011] Updating source flux to 3.8e-14
[Thu Dec 29 04:52:36 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting