[Tue Dec 27 18:52:42 2011] Detection parameters:
  Position = (288.1, 300.7) = 6 0 10.54 -20 6 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.2 +/- 12.3
  Background counts = 10.6
  Rate = 0.007 +/- 0.001

[Tue Dec 27 18:52:44 2011] Off-axis axis estimate = 0.77'
[Tue Dec 27 23:27:18 2011] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 23:27:18 2011] Initial guess for spatial extent in simple fitting = 6.81"
[Tue Dec 27 23:27:18 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937
[Tue Dec 27 23:27:18 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 6.81"
[Wed Dec 28 02:29:46 2011] fullrun_mos1_xmm0650381401_pi300-10000_cl_pass0_src11.ximg exists
[Wed Dec 28 02:29:46 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0650381401_pi300-10000_cl_pass0_src11.csv
[Wed Dec 28 02:29:46 2011] fullrun_mos1_xmm0650381401_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Dec 28 02:29:46 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0650381401_pi300-10000_cl_pass0_src11.csv
[Wed Dec 28 02:29:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650381401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650381401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 02:29:46 2011] fullrun_mos1_xmm0650381401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Dec 28 02:29:47 2011] fullrun_mos1_xmm0650381401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Dec 28 02:29:47 2011] Fit fullrun_mos1_xmm0650381401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Dec 28 07:51:02 2011] Source 15 is offset by -5.184175 and 0.532896 pixels which is larger than
2 X fitted extent = 1.548975 x 1.548975, not incorporating fit results
[Wed Dec 28 07:51:02 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 07:51:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 07:51:02 2011] Assessing source extent using major
[Wed Dec 28 07:51:02 2011] Source does appear to be extended
[Wed Dec 28 07:51:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 07:51:02 2011] Source is confused with source 11
[Wed Dec 28 12:15:18 2011] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 12:15:18 2011] Initial guess for spatial extent in simple fitting = 6.81"
[Wed Dec 28 12:15:18 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937
[Wed Dec 28 12:15:18 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 6.81"
[Wed Dec 28 15:22:07 2011] fullrun_mos1_xmm0650381401_pi300-10000_cl_pass1_src10.ximg exists
[Wed Dec 28 15:22:07 2011] fullrun_mos1_xmm0650381401_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Dec 28 15:22:07 2011] Fit fullrun_mos1_xmm0650381401_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed Dec 28 15:22:08 2011] fullrun_mos1_xmm0650381401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Dec 28 15:22:08 2011] fullrun_mos1_xmm0650381401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Dec 28 15:22:08 2011] Fit fullrun_mos1_xmm0650381401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Dec 28 19:39:02 2011] Spatial fit model total counts = 617.958000, observed total counts = 621.000000
[Wed Dec 28 19:39:02 2011] Offset between fit and detection position for source 15 = 1.306645 pixels
[Wed Dec 28 19:39:02 2011] Warning, changing simple spatial fit ID from 10 to 8
[Wed Dec 28 19:39:02 2011] 589.886400 total counts/ 544.600000 bgd. counts: snr = 1.940569
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.306645 pixels
  Position = (286.8, 300.6) = 6 0 10.95 -20 6 31.8
  Extent = 14.0 (13.9-27.9)", rotation angle = 0
  Source counts = 45.3 +/- 24.3
  Background counts = 544.6
  Rate = 0.004 +/- 0.002
[Wed Dec 28 19:39:02 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 19:39:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 19:39:02 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 19:39:02 2011] Source does appear to be extended
[Wed Dec 28 19:39:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 02:01:04 2011] XMMSAS src. selection expression = ellipse(24899.608000, 26104.900800, 838.440024, 838.440024, 0.000000, X, Y)
[Thu Dec 29 02:01:04 2011] Writing source region out to fullrun_mos1_xmm0650381401_pi300-10000_pass1_cl_src15_src.reg
[Thu Dec 29 02:01:04 2011] Extracting stamp from image fullrun_mos1_xmm0650381401_pi300-10000_cl_sm2.00.img.gz, (239, 252) - (335, 349)
[Thu Dec 29 02:01:04 2011] XMMSAS bgd. selection expression = annulus(24899.608000, 26104.900800, 1397.400040, 2794.800080, X, Y) && !ellipse(25651.085800, 24193.049000, 1119.656032, 1119.656032, 0.000000, X, Y) && !ellipse(23099.426000, 25434.068000, 1253.960036, 1253.960036, 0.000000, X, Y) && !ellipse(25475.124000, 26057.274000, 339.502410, 339.502410, 0.000000, X, Y) && !ellipse(28497.182892, 24590.949799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24924.213400, 25169.462000, 1113.808032, 1113.808032, 0.000000, X, Y) && !ellipse(24054.330200, 25324.888800, 1166.512034, 1166.512034, 0.000000, X, Y) && !ellipse(24282.880000, 25822.002000, 2227.616064, 2227.616064, 0.000000, X, Y) && !ellipse(22744.645081, 24742.570557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24429.794830, 24600.704376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26004.083832, 25434.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25392.362427, 26649.176300, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 02:01:04 2011] Writing fullrun_mos1_xmm0650381401_pi300-10000_pass1_cl_src15.gif
[Thu Dec 29 02:07:05 2011] Mean detx,y = (-1729.53, -440.36) 
[Thu Dec 29 02:07:08 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 02:07:25 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 02:07:25 2011] Setting source spectrum file to fullrun_mos1_xmm0650381401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Dec 29 02:07:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0650381401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Dec 29 03:52:49 2011] Not generating rmf since there are only 45 counts
[Thu Dec 29 03:52:49 2011] rmf not generated due to insufficient counts
[Thu Dec 29 04:51:06 2011] Updating aperture counts using extracted products
[Thu Dec 29 04:51:06 2011] Error reading totcts from fullrun_mos1_xmm0650381401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Dec 29 04:51:07 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 04:51:07 2011] Using photon index=1.80, rate=0.00427, arf fullrun_mos1_xmm0650381401_pi300-10000_pass1_cl_src15.arf
[Thu Dec 29 04:51:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 04:51:07 2011] Updating source flux to 4.2e-14
[Thu Dec 29 04:51:18 2011] Flag b found in src. 15 procflags, skipping spectral fitting
[Thu Dec 29 04:51:18 2011] Flag c found in src. 15 procflags, skipping spectral fitting
[Thu Dec 29 04:51:18 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting