[Mon Dec 26 22:34:51 2011] Detection parameters:
  Position = (265.5, 283.9) = 1 40 8.48 -34 11 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.2 +/- 11.5
  Background counts = 14.1
  Rate = 0.02 +/- 0.003

[Mon Dec 26 22:34:52 2011] Off-axis axis estimate = 2.61'
[Mon Dec 26 22:39:04 2011] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 22:39:04 2011] Initial guess for spatial extent in simple fitting = 7.73"
[Mon Dec 26 22:39:04 2011] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.916
[Mon Dec 26 22:39:04 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 7.73"
[Tue Dec 27 00:15:43 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_src4.ximg exists
[Tue Dec 27 00:15:43 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Dec 27 00:15:43 2011] Fit fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_src4 appears to have run properly
[Tue Dec 27 00:15:43 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Dec 27 00:15:43 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Dec 27 00:15:43 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Dec 27 00:15:43 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Dec 27 00:15:43 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 02:22:09 2011] Source 4 is offset by -6.579313 and -6.762509 pixels which is larger than
2 X fitted extent = 3.729421 x 7.110529, not incorporating fit results
[Tue Dec 27 02:22:09 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:22:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:22:09 2011] Assessing source extent using major
[Tue Dec 27 02:22:09 2011] Source does appear to be extended
[Tue Dec 27 02:22:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 02:22:40 2011] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 02:22:40 2011] Initial guess for spatial extent in simple fitting = 7.73"
[Tue Dec 27 02:22:40 2011] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.916
[Tue Dec 27 02:22:40 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.73"
[Tue Dec 27 04:20:19 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_src4.ximg exists
[Tue Dec 27 04:20:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_src4.csv
[Tue Dec 27 04:20:19 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Dec 27 04:20:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_src4.csv
[Tue Dec 27 04:20:19 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 04:20:19 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Dec 27 04:20:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Dec 27 04:20:19 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Dec 27 04:20:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Dec 27 04:20:19 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 06:10:30 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.018172 pixels away
[Tue Dec 27 06:10:30 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 06:10:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 06:10:30 2011] Assessing source extent using major
[Tue Dec 27 06:10:30 2011] Source does appear to be extended
[Tue Dec 27 06:10:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 06:10:52 2011] XMMSAS src. selection expression = ellipse(23051.725769, 24652.559753, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 06:10:52 2011] Writing source region out to fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src4_src.reg
[Tue Dec 27 06:10:52 2011] Extracting stamp from image fullrun_pn_xmm0650380901_pi300-10000_cl_sm2.00.img.gz, (228, 246) - (303, 321)
[Tue Dec 27 06:10:52 2011] XMMSAS bgd. selection expression = annulus(23051.725769, 24652.559753, 1087.500000, 2175.000000, X, Y) && !ellipse(23796.282000, 25413.777880, 1193.192034, 1193.192034, 0.000000, X, Y) && !ellipse(25191.528046, 26489.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24088.482000, 25392.300000, 1142.040033, 782.248023, 114.814000, X, Y) && !ellipse(25109.139832, 24935.357544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24670.074982, 24755.476654, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 06:10:52 2011] Writing fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src4.gif
[Tue Dec 27 06:29:28 2011] Mean detx,y = (86.33, -1281.34) 
[Tue Dec 27 06:29:35 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 06:30:51 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 06:30:52 2011] Setting source spectrum file to fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Dec 27 06:30:52 2011] Setting bgd. spectrum file to fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Dec 27 12:11:33 2011] Not generating rmf since there are only 76 counts
[Tue Dec 27 12:11:33 2011] rmf not generated due to insufficient counts
[Tue Dec 27 13:44:12 2011] Updating aperture counts using extracted products
[Tue Dec 27 13:44:12 2011] Error reading totcts from fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Dec 27 13:44:13 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 13:44:13 2011] Using photon index=1.80, rate=0.0188, arf fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src4.arf
[Tue Dec 27 13:44:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 13:44:14 2011] Updating source flux to 5e-14
[Tue Dec 27 13:45:06 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting