[Mon Dec 26 22:34:50 2011] Detection parameters:
  Position = (273.9, 292.9) = 1 40 5.54 -34 10 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1589.2 +/- 48.2
  Background counts = 15.3
  Rate = 0.3 +/- 0.009

[Mon Dec 26 22:34:52 2011] Off-axis axis estimate = 1.82'
[Mon Dec 26 22:39:04 2011] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 22:39:04 2011] Initial guess for spatial extent in simple fitting = 7.34"
[Mon Dec 26 22:39:04 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Mon Dec 26 22:39:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Tue Dec 27 00:15:43 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_src1.ximg exists
[Tue Dec 27 00:15:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_src1.csv
[Tue Dec 27 00:15:43 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Dec 27 00:15:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_src1.csv
[Tue Dec 27 00:15:43 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 00:15:43 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Dec 27 00:15:43 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Dec 27 00:15:43 2011] Fit fullrun_pn_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Dec 27 02:22:09 2011] Spatial fit model total counts = 2720.580000, observed total counts = 2734.000000
[Tue Dec 27 02:22:09 2011] Offset between fit and detection position for source 1 = 0.634160 pixels
[Tue Dec 27 02:22:09 2011] 2765.534000 total counts/ 494.924000 bgd. counts: snr = 102.064166
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.634160 pixels
  Position = (273.9, 292.2) = 1 40 5.54 -34 10 39.7
  Extent = 14.6 (14.6-14.6)", rotation angle = 0
  Source counts = 2270.6 +/- 52.6
  Background counts = 494.9
  Rate = 0.4 +/- 0.009
[Tue Dec 27 02:22:09 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:22:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:22:09 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 02:22:09 2011] Source does appear to be extended
[Tue Dec 27 02:22:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 02:22:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 02:22:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 02:22:40 2011] Initial guess for spatial extent in simple fitting = 14.60"
[Tue Dec 27 02:22:40 2011] source mask rpix=3.4, npix_max = 59, mask sum = 63, frac = 1.059
[Tue Dec 27 02:22:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.60"
[Tue Dec 27 04:20:19 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 27 04:20:19 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 27 04:20:19 2011] Fit fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Dec 27 04:20:19 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 27 04:20:19 2011] fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 27 04:20:19 2011] Fit fullrun_pn_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Dec 27 06:10:30 2011] Spatial fit model total counts = 3605.250000, observed total counts = 3610.000000
[Tue Dec 27 06:10:30 2011] Offset between fit and detection position for source 1 = 0.460930 pixels
[Tue Dec 27 06:10:30 2011] 3570.080000 total counts/ 1163.480000 bgd. counts: snr = 70.554457
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.460930 pixels
  Position = (274.1, 292.7) = 1 40 5.48 -34 10 37.9
  Extent = 14.9 (14.2-15.3)", rotation angle = 0
  Source counts = 2406.6 +/- 59.8
  Background counts = 1163.5
  Rate = 0.4 +/- 0.01
[Tue Dec 27 06:10:30 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 06:10:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 06:10:30 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 06:10:30 2011] Source does appear to be extended
[Tue Dec 27 06:10:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 06:10:30 2011] Source is confused with source 13
[Tue Dec 27 06:10:52 2011] Counts = 2406.600000, rescaling region sizes by 2.000000
[Tue Dec 27 06:10:52 2011] XMMSAS src. selection expression = ellipse(23796.282000, 25413.777880, 1789.788052, 1789.788052, 0.000000, X, Y)
[Tue Dec 27 06:10:52 2011] Writing source region out to fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src1_src.reg
[Tue Dec 27 06:10:52 2011] Extracting stamp from image fullrun_pn_xmm0650380901_pi300-10000_cl_sm2.00.img.gz, (171, 190) - (377, 396)
[Tue Dec 27 06:10:52 2011] XMMSAS bgd. selection expression = annulus(23796.282000, 25413.777880, 5965.960172, 11931.920343, X, Y) && !ellipse(36237.468000, 12706.559000, 782.620023, 782.620023, 0.000000, X, Y) && !ellipse(28956.041000, 25631.501400, 446.140813, 446.140813, 0.000000, X, Y) && !ellipse(23051.725769, 24652.559753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35872.389648, 22375.840271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16070.381989, 21455.426575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20599.766600, 29527.835600, 424.840012, 424.840012, 0.000000, X, Y) && !ellipse(32386.524100, 25151.998800, 300.804009, 300.804009, 0.000000, X, Y) && !ellipse(26322.597920, 15359.745600, 406.808012, 406.808012, 0.000000, X, Y) && !ellipse(32703.691833, 35187.153137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25191.528046, 26489.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24088.482000, 25392.300000, 1142.040033, 782.248023, 114.814000, X, Y) && !ellipse(25109.139832, 24935.357544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24670.074982, 24755.476654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23410.802000, 38929.160400, 1913.440055, 1913.440055, 0.000000, X, Y)
[Tue Dec 27 06:10:52 2011] Writing fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src1.gif
[Tue Dec 27 06:11:12 2011] Mean detx,y = (93.09, -327.12) 
[Tue Dec 27 06:11:23 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 06:26:20 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 06:26:21 2011] Setting source spectrum file to fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 27 06:26:21 2011] Setting bgd. spectrum file to fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Dec 27 13:44:11 2011] Updating aperture counts using extracted products
[Tue Dec 27 13:44:11 2011] Error reading totcts from fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 27 13:44:13 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 13:44:13 2011] Using photon index=1.80, rate=0.426, arf fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src1.arf
[Tue Dec 27 13:44:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 13:44:13 2011] Updating source flux to 9.3e-13
[Tue Dec 27 13:45:06 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Dec 27 13:46:24 2011] Reading fit data from xmm0650380901/analysis//spectral/fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src1_pl.csv
[Tue Dec 27 13:46:24 2011] Spectral fit parameter nH value = 8.93554e+20
[Tue Dec 27 13:46:24 2011] Spectral fit parameter PhoIndex value = 2.05033
[Tue Dec 27 13:46:24 2011] Failed to get F(0.3-8.0) from xmm0650380901/analysis//spectral/fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Dec 27 13:46:24 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 13:46:24 2011] Using Nh = 8.9e+20, photon index=2.05, rate=0.426, arf fullrun_pn_xmm0650380901_pi300-10000_pass1_cl_src1.arf
[Tue Dec 27 13:46:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 13:46:24 2011] Updating source flux to 9.8e-13