[Mon Dec 26 22:36:28 2011] Detection parameters:
  Position = (267.2, 300.3) = 1 40 7.88 -34 10 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.9 +/- 8.7
  Background counts = 5.3
  Rate = 0.006 +/- 0.001

[Mon Dec 26 22:36:29 2011] Off-axis axis estimate = 2.27'
[Tue Dec 27 00:44:38 2011] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 00:44:38 2011] Initial guess for spatial extent in simple fitting = 7.56"
[Tue Dec 27 00:44:38 2011] source mask rpix=1.7, npix_max = 20, mask sum = 19, frac = 0.948
[Tue Dec 27 00:44:38 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.56"
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src3.ximg exists
[Tue Dec 27 02:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src3.csv
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Dec 27 02:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src3.csv
[Tue Dec 27 02:21:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Dec 27 02:21:57 2011] Fit fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Dec 27 02:22:21 2011] Source 6 is offset by -6.044033 and 6.299375 pixels which is larger than
2 X fitted extent = 4.366860 x 4.366860, not incorporating fit results
[Tue Dec 27 02:22:21 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:22:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:22:21 2011] Assessing source extent using major
[Tue Dec 27 02:22:21 2011] Source does appear to be extended
[Tue Dec 27 02:22:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 02:22:21 2011] Source is confused with source 3
[Tue Dec 27 04:38:57 2011] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 04:38:57 2011] Initial guess for spatial extent in simple fitting = 7.56"
[Tue Dec 27 04:38:57 2011] source mask rpix=1.7, npix_max = 20, mask sum = 19, frac = 0.948
[Tue Dec 27 04:38:57 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.56"
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src3.ximg exists
[Tue Dec 27 06:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src3.csv
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Dec 27 06:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src3.csv
[Tue Dec 27 06:10:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Dec 27 06:10:20 2011] Fit fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Dec 27 06:10:39 2011] Source 6 is offset by -6.079643 and 6.299375 pixels which is larger than
2 X fitted extent = 4.477614 x 4.477614, not incorporating fit results
[Tue Dec 27 06:10:39 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 06:10:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 06:10:39 2011] Assessing source extent using major
[Tue Dec 27 06:10:39 2011] Source does appear to be extended
[Tue Dec 27 06:10:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 13:17:00 2011] XMMSAS src. selection expression = ellipse(23199.263092, 26081.549622, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 13:17:00 2011] Writing source region out to fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src6_src.reg
[Tue Dec 27 13:17:00 2011] Extracting stamp from image fullrun_mos2_xmm0650380901_pi300-10000_cl_sm2.00.img.gz, (230, 263) - (305, 338)
[Tue Dec 27 13:17:00 2011] XMMSAS bgd. selection expression = annulus(23199.263092, 26081.549622, 1087.500000, 2175.000000, X, Y) && !ellipse(23798.303540, 25409.520600, 974.056028, 974.056028, 0.000000, X, Y) && !ellipse(23633.915283, 26401.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24751.563141, 25958.751862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.108063, 24595.006683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.500000, 25227.070000, 1084.000031, 1084.000031, 0.000000, X, Y)
[Tue Dec 27 13:17:00 2011] Writing fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src6.gif
[Tue Dec 27 13:18:12 2011] Mean detx,y = (-597.25, 212.07) 
[Tue Dec 27 13:18:15 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 13:18:40 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 13:18:41 2011] Setting source spectrum file to fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Dec 27 13:18:41 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Dec 27 13:43:17 2011] Not generating rmf since there are only 39 counts
[Tue Dec 27 13:43:17 2011] rmf not generated due to insufficient counts
[Tue Dec 27 13:44:16 2011] Updating aperture counts using extracted products
[Tue Dec 27 13:44:16 2011] Error reading totcts from fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Dec 27 13:44:17 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 13:44:17 2011] Using photon index=1.80, rate=0.00607, arf fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src6.arf
[Tue Dec 27 13:44:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 13:44:17 2011] Updating source flux to 5.9e-14
[Tue Dec 27 13:44:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting