[Mon Dec 26 22:36:29 2011] Detection parameters:
  Position = (278.7, 283.3) = 1 40 3.86 -34 11 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 8.7
  Background counts = 4.9
  Rate = 0.005 +/- 0.001

[Mon Dec 26 22:36:29 2011] Off-axis axis estimate = 1.81'
[Tue Dec 27 00:44:38 2011] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 00:44:38 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Tue Dec 27 00:44:38 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Tue Dec 27 00:44:38 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.33"
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src7.ximg exists
[Tue Dec 27 02:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src7.csv
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Dec 27 02:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src7.csv
[Tue Dec 27 02:21:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Dec 27 02:21:57 2011] Fit fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Dec 27 02:22:21 2011] Source 10 is offset by 4.754208 and -7.482958 pixels which is larger than
2 X fitted extent = 4.585361 x 4.585361, not incorporating fit results
[Tue Dec 27 02:22:21 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:22:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:22:21 2011] Assessing source extent using major
[Tue Dec 27 02:22:21 2011] Source does appear to be extended
[Tue Dec 27 02:22:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 04:38:57 2011] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 04:38:57 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Tue Dec 27 04:38:57 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Tue Dec 27 04:38:57 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.33"
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src7.ximg exists
[Tue Dec 27 06:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src7.csv
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Dec 27 06:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src7.csv
[Tue Dec 27 06:10:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Dec 27 06:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Dec 27 06:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Dec 27 06:10:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 06:10:39 2011] Source 10 is offset by -6.010896 and 0.954743 pixels which is larger than
2 X fitted extent = 1.399508 x 1.399508, not incorporating fit results
[Tue Dec 27 06:10:39 2011] Source 10 is offset by 4.549587 and -7.482958 pixels which is larger than
2 X fitted extent = 2.657081 x 2.657081, not incorporating fit results
[Tue Dec 27 06:10:39 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 06:10:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 06:10:39 2011] Assessing source extent using major
[Tue Dec 27 06:10:39 2011] Source does appear to be extended
[Tue Dec 27 06:10:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 13:17:01 2011] XMMSAS src. selection expression = ellipse(24197.108063, 24595.006683, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 13:17:01 2011] Writing source region out to fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src10_src.reg
[Tue Dec 27 13:17:01 2011] Extracting stamp from image fullrun_mos2_xmm0650380901_pi300-10000_cl_sm2.00.img.gz, (241, 246) - (316, 321)
[Tue Dec 27 13:17:01 2011] XMMSAS bgd. selection expression = annulus(24197.108063, 24595.006683, 1087.500000, 2175.000000, X, Y) && !ellipse(23798.303540, 25409.520600, 974.056028, 974.056028, 0.000000, X, Y) && !ellipse(23633.915283, 26401.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23199.263092, 26081.549622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24751.563141, 25958.751862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.500000, 25227.070000, 1084.000031, 1084.000031, 0.000000, X, Y)
[Tue Dec 27 13:17:01 2011] Writing fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src10.gif
[Tue Dec 27 13:20:48 2011] Mean detx,y = (705.32, 439.56) 
[Tue Dec 27 13:20:52 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 13:21:18 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 13:21:19 2011] Setting source spectrum file to fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Dec 27 13:21:19 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Dec 27 13:43:41 2011] Not generating rmf since there are only 35 counts
[Tue Dec 27 13:43:41 2011] rmf not generated due to insufficient counts
[Tue Dec 27 13:44:17 2011] Updating aperture counts using extracted products
[Tue Dec 27 13:44:17 2011] Error reading totcts from fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Dec 27 13:44:17 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 13:44:17 2011] Using photon index=1.80, rate=0.00481, arf fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src10.arf
[Tue Dec 27 13:44:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 13:44:17 2011] Updating source flux to 4.7e-14
[Tue Dec 27 13:44:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting