[Mon Dec 26 22:36:28 2011] Detection parameters:
  Position = (274.2, 292.2) = 1 40 5.43 -34 10 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 670.7 +/- 31.3
  Background counts = 5.1
  Rate = 0.09 +/- 0.004

[Mon Dec 26 22:36:29 2011] Off-axis axis estimate = 1.81'
[Tue Dec 27 00:44:38 2011] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 00:44:38 2011] Initial guess for spatial extent in simple fitting = 7.34"
[Tue Dec 27 00:44:38 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Tue Dec 27 00:44:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src1.ximg exists
[Tue Dec 27 02:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src1.csv
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Dec 27 02:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src1.csv
[Tue Dec 27 02:21:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Dec 27 02:21:57 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Dec 27 02:21:57 2011] Fit fullrun_mos2_xmm0650380901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Dec 27 02:22:21 2011] Spatial fit model total counts = 1133.190000, observed total counts = 1133.000000
[Tue Dec 27 02:22:21 2011] Offset between fit and detection position for source 1 = 0.480529 pixels
[Tue Dec 27 02:22:21 2011] 1111.080000 total counts/ 325.028000 bgd. counts: snr = 43.600442
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.480529 pixels
  Position = (274.1, 292.6) = 1 40 5.47 -34 10 38.1
  Extent = 12.2 (10.9-13.5)", rotation angle = 0
  Source counts = 786.1 +/- 33.3
  Background counts = 325.0
  Rate = 0.1 +/- 0.004
[Tue Dec 27 02:22:21 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:22:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:22:21 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 02:22:21 2011] Source does appear to be extended
[Tue Dec 27 02:22:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 04:38:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 04:38:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 04:38:57 2011] Initial guess for spatial extent in simple fitting = 12.18"
[Tue Dec 27 04:38:57 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Tue Dec 27 04:38:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 12.18"
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 27 06:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src1.csv
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 27 06:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src1.csv
[Tue Dec 27 06:10:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 27 06:10:20 2011] fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 27 06:10:20 2011] Fit fullrun_mos2_xmm0650380901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Dec 27 06:10:39 2011] Warning, spatial fit 1 centroid is now closest to src. 10
[Tue Dec 27 06:10:39 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 06:10:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 06:10:39 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 06:10:39 2011] Source does appear to be extended
[Tue Dec 27 06:10:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 13:17:00 2011] XMMSAS src. selection expression = ellipse(23798.303540, 25409.520600, 730.542021, 730.542021, 0.000000, X, Y)
[Tue Dec 27 13:17:00 2011] Writing source region out to fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src1_src.reg
[Tue Dec 27 13:17:00 2011] Extracting stamp from image fullrun_mos2_xmm0650380901_pi300-10000_cl_sm2.00.img.gz, (232, 251) - (316, 335)
[Tue Dec 27 13:17:00 2011] XMMSAS bgd. selection expression = annulus(23798.303540, 25409.520600, 1217.570035, 2435.140070, X, Y) && !ellipse(23633.915283, 26401.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23199.263092, 26081.549622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24751.563141, 25958.751862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.108063, 24595.006683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.500000, 25227.070000, 1084.000031, 1084.000031, 0.000000, X, Y)
[Tue Dec 27 13:17:00 2011] Writing fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src1.gif
[Tue Dec 27 13:17:04 2011] Mean detx,y = (62.78, 234.76) 
[Tue Dec 27 13:17:09 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 13:17:28 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 13:17:28 2011] Setting source spectrum file to fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 27 13:17:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Dec 27 13:44:16 2011] Updating aperture counts using extracted products
[Tue Dec 27 13:44:16 2011] Error reading totcts from fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 27 13:44:17 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 13:44:17 2011] Using photon index=1.80, rate=0.104, arf fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src1.arf
[Tue Dec 27 13:44:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 13:44:17 2011] Updating source flux to 9.9e-13
[Tue Dec 27 13:45:06 2011] Reading fit data from xmm0650380901/analysis//spectral/fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src1_pl.csv
[Tue Dec 27 13:45:06 2011] Spectral fit parameter nH value = 2.10878e+20
[Tue Dec 27 13:45:06 2011] Spectral fit parameter PhoIndex value = 1.77168
[Tue Dec 27 13:45:06 2011] Failed to get F(0.3-8.0) from xmm0650380901/analysis//spectral/fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Dec 27 13:45:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 13:45:06 2011] Using Nh = 2.1e+20, photon index=1.77, rate=0.104, arf fullrun_mos2_xmm0650380901_pi300-10000_pass1_cl_src1.arf
[Tue Dec 27 13:45:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 13:45:06 2011] Updating source flux to 1e-12