[Thu Dec 22 22:08:56 2011] Detection parameters:
  Position = (285.0, 288.0) = 1 10 6.66 32 11 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.0 +/- 17.9
  Background counts = 27.7
  Rate = 0.02 +/- 0.002

[Thu Dec 22 22:08:58 2011] Off-axis axis estimate = 1.23'
[Thu Dec 22 22:09:28 2011] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 22:09:28 2011] Initial guess for spatial extent in simple fitting = 7.04"
[Thu Dec 22 22:09:28 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Thu Dec 22 22:09:28 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.04"
[Thu Dec 22 22:09:33 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src5.ximg exists
[Thu Dec 22 22:09:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src5.csv
[Thu Dec 22 22:09:33 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Dec 22 22:09:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src5.csv
[Thu Dec 22 22:09:33 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 22:09:35 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Dec 22 22:09:35 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Dec 22 22:09:35 2011] Fit fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Dec 22 22:10:01 2011] Spatial fit model total counts = 933.464000, observed total counts = 933.000000
[Thu Dec 22 22:10:01 2011] Offset between fit and detection position for source 5 = 1.316885 pixels
[Thu Dec 22 22:10:01 2011] 862.484000 total counts/ 695.505000 bgd. counts: snr = 6.331575
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.316885 pixels
  Position = (284.7, 289.2) = 1 10 6.77 32 11 15.7
  Extent = 14.1 (13.8-28.2)", rotation angle = 0
  Source counts = 167.0 +/- 29.4
  Background counts = 695.5
  Rate = 0.02 +/- 0.003
[Thu Dec 22 22:10:01 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 22:10:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 22:10:01 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 22:10:01 2011] Source does appear to be extended
[Thu Dec 22 22:10:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 22:10:01 2011] Source is confused with source 6
[Thu Dec 22 22:10:01 2011] Source is confused with source 10
[Thu Dec 22 22:10:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 22:10:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 22:10:26 2011] Initial guess for spatial extent in simple fitting = 14.09"
[Thu Dec 22 22:10:26 2011] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.876
[Thu Dec 22 22:10:26 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 14.09"
[Thu Dec 22 22:10:26 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src5.ximg exists
[Thu Dec 22 22:10:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src5.csv
[Thu Dec 22 22:10:26 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Dec 22 22:10:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src5.csv
[Thu Dec 22 22:10:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 22:10:27 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Dec 22 22:10:27 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Dec 22 22:10:27 2011] Fit fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Dec 22 22:10:40 2011] Warning, spatial fit 5 centroid is now closest to src. 10
[Thu Dec 22 22:10:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 22:10:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 22:10:40 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 22:10:40 2011] Source does appear to be extended
[Thu Dec 22 22:10:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 22:11:03 2011] XMMSAS src. selection expression = ellipse(24722.004600, 25116.022000, 845.376024, 845.376024, 0.000000, X, Y)
[Thu Dec 22 22:11:03 2011] Not overwriting source region fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_src.reg
[Thu Dec 22 22:11:03 2011] Extracting stamp from image fullrun_pn_xmm0650380801_pi300-10000_cl_sm2.00.img.gz, (236, 241) - (333, 338)
[Thu Dec 22 22:11:03 2011] XMMSAS bgd. selection expression = annulus(24722.004600, 25116.022000, 1408.960041, 2817.920081, X, Y) && !ellipse(23139.495800, 27463.242800, 337.681240, 337.681240, 0.000000, X, Y) && !ellipse(24572.635174, 24552.773020, 1157.472033, 1157.472033, 0.000000, X, Y) && !ellipse(24729.918000, 24590.316400, 1150.344033, 1150.344033, 0.000000, X, Y) && !ellipse(23675.841000, 23417.666000, 263.010408, 263.010408, 0.000000, X, Y) && !ellipse(24607.299469, 23244.807465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23936.790405, 25441.759247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25352.499817, 23880.039154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23765.936615, 22808.222412, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 22 22:11:03 2011] Writing fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5.gif
[Thu Dec 22 22:11:04 2011] ../../xmm0650380801/products/events/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0650380801/products/events/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu Dec 22 22:11:04 2011] Mean detx,y = (-348.85, 103.98) 
[Thu Dec 22 22:11:04 2011] ../../xmm0650380801/products/images/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_src.img and ../../xmm0650380801/products/images/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu Dec 22 22:11:04 2011] ../../xmm0650380801/products/spectra/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0650380801/products/spectra/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu Dec 22 22:11:04 2011] Setting source spectrum file to fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Dec 22 22:11:04 2011] Setting bgd. spectrum file to fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Dec 22 22:11:04 2011] ../../xmm0650380801/products/lightcurves/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0650380801/products/lightcurves/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu Dec 22 22:11:12 2011] fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5.rmf exists, delete to re-create
[Thu Dec 22 22:11:12 2011] fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Thu Dec 22 22:11:47 2011] Updating aperture counts using extracted products
[Thu Dec 22 22:11:47 2011] Error reading totcts from fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Dec 22 22:11:49 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 22:11:49 2011] Using photon index=1.80, rate=0.0191, arf fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5.arf
[Thu Dec 22 22:11:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 22:11:49 2011] Updating source flux to 4.4e-14
[Thu Dec 22 22:11:59 2011] Flag c found in src. 5 procflags, skipping spectral fitting
[Thu Dec 22 22:12:00 2011] Reading fit data from xmm0650380801/analysis//spectral/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_pl.csv
[Thu Dec 22 22:12:00 2011] Spectral fit parameter nH value = 1.22309e+21
[Thu Dec 22 22:12:00 2011] Spectral fit parameter PhoIndex value = 2.223
[Thu Dec 22 22:12:00 2011] Failed to get F(0.3-8.0) from xmm0650380801/analysis//spectral/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Thu Dec 22 22:12:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 22:12:00 2011] Using Nh = 1.2e+21, photon index=2.22, rate=0.0191, arf fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src5.arf
[Thu Dec 22 22:12:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 22:12:00 2011] Updating source flux to 4.5e-14