[Thu Dec 22 22:08:58 2011] Detection parameters:
  Position = (256.7, 390.5) = 1 10 16.38 32 18 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.3 +/- 11.1
  Background counts = 20.2
  Rate = 0.01 +/- 0.002

[Thu Dec 22 22:08:58 2011] Off-axis axis estimate = 7.33'
[Thu Dec 22 22:09:28 2011] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 22:09:28 2011] Initial guess for spatial extent in simple fitting = 10.09"
[Thu Dec 22 22:09:28 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.943
[Thu Dec 22 22:09:28 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 10.09"
[Thu Dec 22 22:09:35 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src22.ximg exists
[Thu Dec 22 22:09:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src22.csv
[Thu Dec 22 22:09:35 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Dec 22 22:09:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src22.csv
[Thu Dec 22 22:09:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 22:09:36 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Dec 22 22:09:36 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Dec 22 22:09:36 2011] Fit fullrun_pn_xmm0650380801_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Dec 22 22:10:01 2011] Spatial fit model total counts = 258.604000, observed total counts = 257.000000
[Thu Dec 22 22:10:01 2011] Offset between fit and detection position for source 22 = 0.020182 pixels
[Thu Dec 22 22:10:01 2011] 255.289900 total counts/ 214.652000 bgd. counts: snr = 2.773727
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.020182 pixels
  Position = (256.7, 390.5) = 1 10 16.38 32 18 36.2
  Extent = 4.9 (3.3-6.6)", rotation angle = 0
  Source counts = 40.6 +/- 16.0
  Background counts = 214.7
  Rate = 0.005 +/- 0.002
[Thu Dec 22 22:10:01 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 22:10:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 22:10:01 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 22:10:01 2011] Source does appear to be extended
[Thu Dec 22 22:10:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 22:10:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 22:10:26 2011] Initial guess for spatial extent in simple fitting = 4.87"
[Thu Dec 22 22:10:26 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.859
[Thu Dec 22 22:10:26 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 4.87"
[Thu Dec 22 22:10:27 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src20.ximg exists
[Thu Dec 22 22:10:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src20.csv
[Thu Dec 22 22:10:27 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Dec 22 22:10:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src20.csv
[Thu Dec 22 22:10:27 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 22:10:27 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Dec 22 22:10:27 2011] fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Dec 22 22:10:27 2011] Fit fullrun_pn_xmm0650380801_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu Dec 22 22:10:40 2011] Warning, spatial fit 20 centroid is now closest to src. 16
[Thu Dec 22 22:10:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 22:10:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 22:10:40 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 22:10:40 2011] Source does appear to be extended
[Thu Dec 22 22:10:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 22:11:03 2011] XMMSAS src. selection expression = ellipse(22286.879400, 33926.028800, 291.966608, 291.966608, 0.000000, X, Y)
[Thu Dec 22 22:11:03 2011] Not overwriting source region fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_src.reg
[Thu Dec 22 22:11:03 2011] Extracting stamp from image fullrun_pn_xmm0650380801_pi300-10000_cl_sm2.00.img.gz, (240, 374) - (274, 407)
[Thu Dec 22 22:11:03 2011] XMMSAS bgd. selection expression = annulus(22286.879400, 33926.028800, 486.611014, 973.222028, X, Y)
[Thu Dec 22 22:11:03 2011] Writing fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22.gif
[Thu Dec 22 22:11:05 2011] ../../xmm0650380801/products/events/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0650380801/products/events/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Thu Dec 22 22:11:05 2011] Mean detx,y = (5694.53, 7072.06) 
[Thu Dec 22 22:11:05 2011] ../../xmm0650380801/products/images/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_src.img and ../../xmm0650380801/products/images/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Thu Dec 22 22:11:05 2011] ../../xmm0650380801/products/spectra/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0650380801/products/spectra/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Thu Dec 22 22:11:05 2011] Setting source spectrum file to fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Dec 22 22:11:05 2011] Setting bgd. spectrum file to fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu Dec 22 22:11:05 2011] ../../xmm0650380801/products/lightcurves/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0650380801/products/lightcurves/fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Thu Dec 22 22:11:12 2011] Not generating rmf since there are only 40 counts
[Thu Dec 22 22:11:12 2011] rmf not generated due to insufficient counts
[Thu Dec 22 22:11:12 2011] fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22.arf exists, delete to re-create
[Thu Dec 22 22:11:48 2011] Updating aperture counts using extracted products
[Thu Dec 22 22:11:48 2011] Error reading totcts from fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Dec 22 22:11:50 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 22:11:50 2011] Using photon index=1.80, rate=0.00465, arf fullrun_pn_xmm0650380801_pi300-10000_pass1_cl_src22.arf
[Thu Dec 22 22:11:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 22:11:50 2011] Updating source flux to 2.1e-14
[Thu Dec 22 22:11:59 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting