[Wed May 23 15:20:36 2012] Detection parameters:
  Position = (321.2, 313.0) = 0 34 27.14 2 25 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.7 +/- 19.1
  Background counts = 6.7
  Rate = 0.04 +/- 0.003

[Wed May 23 15:20:38 2012] Off-axis axis estimate = 1.96'
[Wed May 23 16:53:59 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Wed May 23 16:53:59 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Wed May 23 16:53:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Wed May 23 16:53:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.41"
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 23 18:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src1.csv
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 23 18:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src1.csv
[Wed May 23 18:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 23 18:46:35 2012] Fit fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 23 18:46:53 2012] Spatial fit model total counts = 785.378000, observed total counts = 722.000000
[Wed May 23 18:46:53 2012] Offset between fit and detection position for source 6 = 0.390588 pixels
[Wed May 23 18:46:53 2012] 786.647000 total counts/ 628.599000 bgd. counts: snr = 6.303796
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.390588 pixels
  Position = (320.9, 312.8) = 0 34 27.24 2 25 18.9
  Extent = 11.1 (7.7-14.8)", rotation angle = 0
  Source counts = 158.0 +/- 28.0
  Background counts = 628.6
  Rate = 0.02 +/- 0.004
[Wed May 23 18:46:53 2012] Vigneting correction estimate = 1.000000
[Wed May 23 18:46:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 18:46:53 2012] Assessing source extent using major axis lower bound
[Wed May 23 18:46:53 2012] Source does appear to be extended
[Wed May 23 18:46:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 18:46:53 2012] Source is confused with source 4
[Wed May 23 20:03:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 20:03:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 20:03:17 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Wed May 23 20:03:17 2012] source mask rpix=2.5, npix_max = 37, mask sum = 35, frac = 0.943
[Wed May 23 20:03:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.07"
[Wed May 23 21:19:21 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 23 21:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src1.csv
[Wed May 23 21:19:21 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 23 21:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src1.csv
[Wed May 23 21:19:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 23 21:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 23 21:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 23 21:19:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 21:19:40 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Wed May 23 21:19:40 2012] Vigneting correction estimate = 1.000000
[Wed May 23 21:19:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 21:19:40 2012] Assessing source extent using major axis lower bound
[Wed May 23 21:19:40 2012] Source does appear to be extended
[Wed May 23 21:19:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 01:28:59 2012] XMMSAS src. selection expression = ellipse(27870.900500, 27161.040600, 664.350019, 664.350019, 0.000000, X, Y)
[Thu May 24 01:28:59 2012] Writing source region out to fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src6_src.reg
[Thu May 24 01:28:59 2012] Extracting stamp from image fullrun_mos2_xmm0650380501_pi300-10000_cl_sm2.00.img.gz, (283, 275) - (359, 351)
[Thu May 24 01:28:59 2012] XMMSAS bgd. selection expression = annulus(27870.900500, 27161.040600, 1107.250032, 2214.500064, X, Y) && !ellipse(28967.504000, 27445.050000, 1070.824031, 1070.824031, 0.000000, X, Y) && !ellipse(28762.006134, 27084.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25336.800629, 25461.148926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28238.963400, 27974.302000, 795.389623, 795.389623, 0.000000, X, Y) && !ellipse(27685.062000, 27196.912600, 1156.704033, 1156.704033, 0.000000, X, Y) && !ellipse(28266.633423, 25977.804352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.872589, 28840.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28422.735870, 28514.764496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29616.144989, 27683.596954, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 01:28:59 2012] Writing fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src6.gif
[Thu May 24 01:29:01 2012] Mean detx,y = (-87.54, 310.49) 
[Thu May 24 01:29:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 01:29:11 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 01:29:11 2012] Setting source spectrum file to fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 24 01:29:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 24 01:59:03 2012] Updating aperture counts using extracted products
[Thu May 24 01:59:03 2012] Error reading totcts from fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 24 01:59:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 01:59:03 2012] Using photon index=1.80, rate=0.0239, arf fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src6.arf
[Thu May 24 01:59:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 01:59:03 2012] Updating source flux to 2.4e-13
[Thu May 24 01:59:37 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Thu May 24 01:59:52 2012] Reading fit data from xmm0650380501/analysis//spectral/fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src6_pl.csv
[Thu May 24 01:59:52 2012] Spectral fit parameter nH value = 1.58586e+20
[Thu May 24 01:59:52 2012] Spectral fit parameter PhoIndex value = 1.58287
[Thu May 24 01:59:52 2012] Failed to get F(0.3-8.0) from xmm0650380501/analysis//spectral/fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Thu May 24 01:59:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 01:59:52 2012] Using Nh = 1.6e+20, photon index=1.58, rate=0.0239, arf fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src6.arf
[Thu May 24 01:59:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 01:59:52 2012] Updating source flux to 2.7e-13