[Wed May 23 15:20:36 2012] Detection parameters:
  Position = (325.3, 319.2) = 0 34 25.97 2 25 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.6 +/- 14.8
  Background counts = 6.7
  Rate = 0.02 +/- 0.002

[Wed May 23 15:20:38 2012] Off-axis axis estimate = 2.46'
[Wed May 23 16:53:59 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed May 23 16:53:59 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Wed May 23 16:53:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.930
[Wed May 23 16:53:59 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.66"
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 23 18:46:35 2012] Fit fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src5 appears to have run properly
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 23 18:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 23 18:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 23 18:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 18:46:53 2012] Warning, spatial fit 5 centroid is now closest to src. 12
[Wed May 23 18:46:53 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.740169 pixels away
[Wed May 23 18:46:53 2012] Source 2 is offset by -2.521416 and -3.027903 pixels which is larger than
2 X fitted extent = 0.851559 x 0.851559, not incorporating fit results
[Wed May 23 18:46:53 2012] Vigneting correction estimate = 1.000000
[Wed May 23 18:46:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 18:46:53 2012] Assessing source extent using major
[Wed May 23 18:46:53 2012] Source does appear to be extended
[Wed May 23 18:46:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 18:46:53 2012] Source is confused with source 3
[Wed May 23 20:03:17 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:03:17 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Wed May 23 20:03:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.930
[Wed May 23 20:03:17 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.66"
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 23 21:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src5.csv
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 23 21:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src5.csv
[Wed May 23 21:19:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 23 21:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 23 21:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May 23 21:19:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 21:19:40 2012] Spatial fit model total counts = 800.096000, observed total counts = 687.000000
[Wed May 23 21:19:40 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 21:19:40 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Wed May 23 21:19:40 2012] Spatial fit model total counts = 284.026000, observed total counts = 267.000000
[Wed May 23 21:19:40 2012] Offset between fit and detection position for source 2 = 2.943903 pixels
[Wed May 23 21:19:40 2012] Warning, changing simple spatial fit ID from 5 to 15
[Wed May 23 21:19:40 2012] 276.616300 total counts/ 231.293000 bgd. counts: snr = 2.980165
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.943903 pixels
  Position = (325.1, 322.1) = 0 34 26.01 2 25 59.5
  Extent = 9.9 (4.7-15.9)", rotation angle = 0
  Source counts = 45.3 +/- 16.6
  Background counts = 231.3
  Rate = 0.007 +/- 0.003
[Wed May 23 21:19:40 2012] Vigneting correction estimate = 1.000000
[Wed May 23 21:19:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 21:19:40 2012] Assessing source extent using major axis lower bound
[Wed May 23 21:19:40 2012] Source does appear to be extended
[Wed May 23 21:19:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 01:28:59 2012] XMMSAS src. selection expression = ellipse(28238.963400, 27974.302000, 596.542217, 596.542217, 0.000000, X, Y)
[Thu May 24 01:28:59 2012] Writing source region out to fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src2_src.reg
[Thu May 24 01:28:59 2012] Extracting stamp from image fullrun_mos2_xmm0650380501_pi300-10000_cl_sm2.00.img.gz, (291, 288) - (359, 356)
[Thu May 24 01:28:59 2012] XMMSAS bgd. selection expression = annulus(28238.963400, 27974.302000, 994.237029, 1988.474057, X, Y) && !ellipse(27870.900500, 27161.040600, 885.800025, 885.800025, 0.000000, X, Y) && !ellipse(28967.504000, 27445.050000, 1070.824031, 1070.824031, 0.000000, X, Y) && !ellipse(28762.006134, 27084.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.062000, 27196.912600, 1156.704033, 1156.704033, 0.000000, X, Y) && !ellipse(28266.633423, 25977.804352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.872589, 28840.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28422.735870, 28514.764496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29616.144989, 27683.596954, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 01:28:59 2012] Writing fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src2.gif
[Thu May 24 01:29:46 2012] Mean detx,y = (-116.24, 1102.84) 
[Thu May 24 01:29:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 01:29:55 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 01:29:55 2012] Setting source spectrum file to fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 01:29:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 24 01:47:58 2012] Not generating rmf since there are only 45 counts
[Thu May 24 01:47:58 2012] rmf not generated due to insufficient counts
[Thu May 24 01:59:03 2012] Updating aperture counts using extracted products
[Thu May 24 01:59:03 2012] Error reading totcts from fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 01:59:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 01:59:03 2012] Using photon index=1.80, rate=0.00685, arf fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src2.arf
[Thu May 24 01:59:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 01:59:03 2012] Updating source flux to 7.1e-14
[Thu May 24 01:59:37 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu May 24 01:59:37 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Thu May 24 01:59:37 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu May 24 01:59:37 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting