[Wed May 23 15:20:37 2012] Detection parameters:
  Position = (327.3, 328.3) = 0 34 25.39 2 26 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.7 +/- 8.1
  Background counts = 6.7
  Rate = 0.004 +/- 0.001

[Wed May 23 15:20:38 2012] Off-axis axis estimate = 3.01'
[Wed May 23 16:53:59 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Wed May 23 16:53:59 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Wed May 23 16:53:59 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.157
[Wed May 23 16:53:59 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.93"
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src20.ximg exists
[Wed May 23 18:46:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src20.csv
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed May 23 18:46:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src20.csv
[Wed May 23 18:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 18:46:35 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed May 23 18:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 23 18:46:36 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed May 23 18:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 23 18:46:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 18:46:53 2012] Warning, spatial fit 20 centroid is now closest to src. 2
[Wed May 23 18:46:53 2012] Vigneting correction estimate = 1.000000
[Wed May 23 18:46:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 18:46:53 2012] Assessing source extent using major
[Wed May 23 18:46:53 2012] Source does appear to be extended
[Wed May 23 18:46:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 20:03:17 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:03:17 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Wed May 23 20:03:17 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.157
[Wed May 23 20:03:17 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.93"
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src15.ximg exists
[Wed May 23 21:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src15.csv
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed May 23 21:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src15.csv
[Wed May 23 21:19:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed May 23 21:19:22 2012] fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed May 23 21:19:22 2012] Fit fullrun_mos2_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed May 23 21:19:40 2012] Source 15 is offset by -4.039864 and 1.017937 pixels which is larger than
2 X fitted extent = 1.661931 x 1.661931, not incorporating fit results
[Wed May 23 21:19:40 2012] Warning, spatial fit 15 centroid is now closest to src. 2
[Wed May 23 21:19:40 2012] Vigneting correction estimate = 1.000000
[Wed May 23 21:19:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 21:19:40 2012] Assessing source extent using major
[Wed May 23 21:19:40 2012] Source does appear to be extended
[Wed May 23 21:19:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 21:19:40 2012] Source is confused with source 2
[Thu May 24 01:28:59 2012] XMMSAS src. selection expression = ellipse(28422.735870, 28514.764496, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 01:28:59 2012] Writing source region out to fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src15_src.reg
[Thu May 24 01:28:59 2012] Extracting stamp from image fullrun_mos2_xmm0650380501_pi300-10000_cl_sm2.00.img.gz, (290, 291) - (365, 366)
[Thu May 24 01:28:59 2012] XMMSAS bgd. selection expression = annulus(28422.735870, 28514.764496, 1087.500000, 2175.000000, X, Y) && !ellipse(27870.900500, 27161.040600, 885.800025, 885.800025, 0.000000, X, Y) && !ellipse(28967.504000, 27445.050000, 1070.824031, 1070.824031, 0.000000, X, Y) && !ellipse(28762.006134, 27084.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28238.963400, 27974.302000, 795.389623, 795.389623, 0.000000, X, Y) && !ellipse(27685.062000, 27196.912600, 1156.704033, 1156.704033, 0.000000, X, Y) && !ellipse(28266.633423, 25977.804352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.872589, 28840.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29616.144989, 27683.596954, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 01:28:59 2012] Writing fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src15.gif
[Thu May 24 01:32:11 2012] Mean detx,y = (-72.39, 1579.26) 
[Thu May 24 01:32:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 01:32:20 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 01:32:20 2012] Setting source spectrum file to fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 24 01:32:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu May 24 01:58:06 2012] Not generating rmf since there are only 26 counts
[Thu May 24 01:58:06 2012] rmf not generated due to insufficient counts
[Thu May 24 01:59:03 2012] Updating aperture counts using extracted products
[Thu May 24 01:59:03 2012] Error reading totcts from fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 24 01:59:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 01:59:04 2012] Using photon index=1.80, rate=0.00443, arf fullrun_mos2_xmm0650380501_pi300-10000_pass1_cl_src15.arf
[Thu May 24 01:59:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 01:59:04 2012] Updating source flux to 4.6e-14
[Thu May 24 01:59:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting