[Wed May 23 15:19:59 2012] Detection parameters:
  Position = (331.0, 303.1) = 0 34 24.29 2 24 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.0 +/- 13.5
  Background counts = 9.3
  Rate = 0.02 +/- 0.002

[Wed May 23 15:19:59 2012] Off-axis axis estimate = 2.39'
[Wed May 23 15:58:16 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Wed May 23 15:58:16 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Wed May 23 15:58:16 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.789
[Wed May 23 15:58:16 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.62"
[Wed May 23 16:53:59 2012] fullrun_mos1_xmm0650380501_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 23 16:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650380501_pi300-10000_cl_pass0_src7.csv
[Wed May 23 16:53:59 2012] fullrun_mos1_xmm0650380501_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 23 16:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650380501_pi300-10000_cl_pass0_src7.csv
[Wed May 23 16:53:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650380501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650380501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 16:53:59 2012] fullrun_mos1_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 23 16:53:59 2012] fullrun_mos1_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 23 16:53:59 2012] Fit fullrun_mos1_xmm0650380501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed May 23 18:46:46 2012] Spatial fit model total counts = 442.924000, observed total counts = 441.000000
[Wed May 23 18:46:46 2012] Offset between fit and detection position for source 13 = 0.285211 pixels
[Wed May 23 18:46:46 2012] 448.374500 total counts/ 412.041000 bgd. counts: snr = 1.789934
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.285211 pixels
  Position = (331.1, 302.8) = 0 34 24.28 2 24 35.6
  Extent = 4.0 (2.9-5.9)", rotation angle = 0
  Source counts = 36.3 +/- 21.2
  Background counts = 412.0
  Rate = 0.005 +/- 0.003
[Wed May 23 18:46:46 2012] Vigneting correction estimate = 1.000000
[Wed May 23 18:46:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 18:46:46 2012] Assessing source extent using major axis lower bound
[Wed May 23 18:46:46 2012] Source does appear to be extended
[Wed May 23 18:46:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 19:16:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 19:16:17 2012] Initial guess for spatial extent in simple fitting = 4.02"
[Wed May 23 19:16:17 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.110
[Wed May 23 19:16:17 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.02"
[Wed May 23 20:03:17 2012] fullrun_mos1_xmm0650380501_pi300-10000_cl_pass1_src7.ximg exists
[Wed May 23 20:03:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650380501_pi300-10000_cl_pass1_src7.csv
[Wed May 23 20:03:17 2012] fullrun_mos1_xmm0650380501_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed May 23 20:03:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650380501_pi300-10000_cl_pass1_src7.csv
[Wed May 23 20:03:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650380501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650380501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 20:03:17 2012] fullrun_mos1_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed May 23 20:03:17 2012] fullrun_mos1_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed May 23 20:03:17 2012] Fit fullrun_mos1_xmm0650380501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed May 23 21:19:33 2012] Spatial fit model total counts = 441.672000, observed total counts = 441.000000
[Wed May 23 21:19:33 2012] Offset between fit and detection position for source 13 = 0.023869 pixels
[Wed May 23 21:19:33 2012] 448.657000 total counts/ 411.609000 bgd. counts: snr = 1.826091
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.023869 pixels
  Position = (331.1, 302.8) = 0 34 24.28 2 24 35.7
  Extent = 3.9 (2.9-5.8)", rotation angle = 0
  Source counts = 37.0 +/- 21.2
  Background counts = 411.6
  Rate = 0.006 +/- 0.003
[Wed May 23 21:19:33 2012] Vigneting correction estimate = 1.000000
[Wed May 23 21:19:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 21:19:33 2012] Assessing source extent using major axis lower bound
[Wed May 23 21:19:33 2012] Source does appear to be extended
[Wed May 23 21:19:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 21:19:33 2012] Source is confused with source 12
[Wed May 23 21:51:37 2012] XMMSAS src. selection expression = ellipse(28757.815320, 26296.816400, 233.080807, 233.080807, 0.000000, X, Y)
[Wed May 23 21:51:37 2012] Writing source region out to fullrun_mos1_xmm0650380501_pi300-10000_pass1_cl_src13_src.reg
[Wed May 23 21:51:37 2012] Extracting stamp from image fullrun_mos1_xmm0650380501_pi300-10000_cl_sm2.00.img.gz, (318, 289) - (345, 316)
[Wed May 23 21:51:37 2012] XMMSAS bgd. selection expression = annulus(28757.815320, 26296.816400, 388.468011, 776.936022, X, Y) && !ellipse(28768.566800, 27751.263600, 782.680823, 782.680823, 0.000000, X, Y) && !ellipse(28241.186000, 27176.160000, 2539.104073, 2539.104073, 0.000000, X, Y) && !ellipse(28649.758400, 27005.033800, 740.266421, 740.266421, 0.000000, X, Y) && !ellipse(28643.928000, 27841.942000, 1257.712036, 1257.712036, 0.000000, X, Y) && !ellipse(27820.390000, 27536.478000, 1206.048035, 1206.048035, 0.000000, X, Y)
[Wed May 23 21:51:37 2012] Writing fullrun_mos1_xmm0650380501_pi300-10000_pass1_cl_src13.gif
[Wed May 23 22:04:14 2012] Mean detx,y = (69.46, 1078.65) 
[Wed May 23 22:04:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 22:04:29 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 22:04:30 2012] Setting source spectrum file to fullrun_mos1_xmm0650380501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 23 22:04:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650380501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu May 24 01:20:32 2012] Not generating rmf since there are only 37 counts
[Thu May 24 01:20:32 2012] rmf not generated due to insufficient counts
[Thu May 24 01:59:02 2012] Updating aperture counts using extracted products
[Thu May 24 01:59:02 2012] Error reading totcts from fullrun_mos1_xmm0650380501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu May 24 01:59:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 01:59:03 2012] Using photon index=1.80, rate=0.0056, arf fullrun_mos1_xmm0650380501_pi300-10000_pass1_cl_src13.arf
[Thu May 24 01:59:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 01:59:03 2012] Updating source flux to 7.7e-14
[Thu May 24 01:59:04 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Thu May 24 01:59:04 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting