[Sun Mar 25 22:20:35 2012] Detection parameters:
  Position = (325.9, 243.1) = 21 1 5.45 68 4 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.5 +/- 20.3
  Background counts = 3.9
  Rate = 0.03 +/- 0.002

[Sun Mar 25 22:20:36 2012] Off-axis axis estimate = 4.48'
[Mon Mar 26 00:13:19 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 00:13:19 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Mon Mar 26 00:13:19 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.006
[Mon Mar 26 00:13:19 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.67"
[Mon Mar 26 01:19:51 2012] fullrun_mos2_xmm0650320101_pi300-10000_cl_pass0_src2.ximg exists
[Mon Mar 26 01:19:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650320101_pi300-10000_cl_pass0_src2.csv
[Mon Mar 26 01:19:51 2012] fullrun_mos2_xmm0650320101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Mar 26 01:19:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650320101_pi300-10000_cl_pass0_src2.csv
[Mon Mar 26 01:19:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650320101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650320101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 01:19:51 2012] fullrun_mos2_xmm0650320101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Mar 26 01:19:51 2012] fullrun_mos2_xmm0650320101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Mar 26 01:19:51 2012] Fit fullrun_mos2_xmm0650320101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Mar 26 01:20:12 2012] Source 1 is offset by -7.030662 and 7.051215 pixels which is larger than
2 X fitted extent = 0.996474 x 0.996474, not incorporating fit results
[Mon Mar 26 01:20:12 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 01:20:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 01:20:12 2012] Assessing source extent using major
[Mon Mar 26 01:20:12 2012] Source does appear to be extended
[Mon Mar 26 01:20:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 03:03:46 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 03:03:46 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Mon Mar 26 03:03:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.006
[Mon Mar 26 03:03:46 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.67"
[Mon Mar 26 03:47:25 2012] fullrun_mos2_xmm0650320101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Mar 26 03:47:25 2012] fullrun_mos2_xmm0650320101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Mar 26 03:47:25 2012] Fit fullrun_mos2_xmm0650320101_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon Mar 26 03:47:26 2012] fullrun_mos2_xmm0650320101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Mar 26 03:47:26 2012] fullrun_mos2_xmm0650320101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Mar 26 03:47:26 2012] Fit fullrun_mos2_xmm0650320101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Mar 26 03:47:42 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.364852 pixels away
[Mon Mar 26 03:47:42 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 03:47:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 03:47:42 2012] Assessing source extent using major
[Mon Mar 26 03:47:42 2012] Source does appear to be extended
[Mon Mar 26 03:47:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 05:32:37 2012] XMMSAS src. selection expression = ellipse(28308.378448, 21099.409714, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 05:32:37 2012] Writing source region out to fullrun_mos2_xmm0650320101_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 26 05:32:37 2012] Extracting stamp from image fullrun_mos2_xmm0650320101_pi300-10000_cl_sm2.00.img.gz, (288, 206) - (363, 281)
[Mon Mar 26 05:32:37 2012] XMMSAS bgd. selection expression = annulus(28308.378448, 21099.409714, 1087.500000, 2175.000000, X, Y)
[Mon Mar 26 05:32:37 2012] Writing fullrun_mos2_xmm0650320101_pi300-10000_pass1_cl_src1.gif
[Mon Mar 26 05:33:14 2012] Mean detx,y = (4635.92, -5764.11) 
[Mon Mar 26 05:33:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 05:34:00 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 05:34:01 2012] Setting source spectrum file to fullrun_mos2_xmm0650320101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 05:34:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0650320101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 26 05:42:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 05:42:53 2012] rmf not generated due to insufficient counts
[Mon Mar 26 05:53:55 2012] Updating aperture counts using extracted products
[Mon Mar 26 05:53:55 2012] Error reading totcts from fullrun_mos2_xmm0650320101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 05:53:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 05:53:56 2012] Using photon index=1.80, rate=0.0327, arf fullrun_mos2_xmm0650320101_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 05:53:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 05:53:56 2012] Updating source flux to 5.5e-13
[Mon Mar 26 05:54:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting