[Sat Jun  1 17:49:17 2013] Detection parameters:
  Position = (307.2, 420.2) = 8 21 57.06 -42 49 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1352.6 +/- 59.4
  Background counts = 749.4
  Rate = 0.05 +/- 0.002

[Sat Jun  1 17:49:56 2013] Off-axis axis estimate = 8.85'
[Sat Jun  1 17:53:23 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:23 2013] Initial guess for spatial extent in simple fitting = 10.86"
[Sat Jun  1 17:53:23 2013] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.947
[Sat Jun  1 17:53:23 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 10.86"
[Sat Jun  1 17:53:24 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src22.ximg exists
[Sat Jun  1 17:53:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src22.csv
[Sat Jun  1 17:53:24 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat Jun  1 17:53:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src22.csv
[Sat Jun  1 17:53:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:28 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat Jun  1 17:53:28 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Jun  1 17:53:28 2013] Fit fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sat Jun  1 17:55:05 2013] Warning, spatial fit 22 centroid is now closest to src. 44
[Sat Jun  1 17:55:07 2013] Spatial fit model total counts = 11377.500000, observed total counts = 10134.000000
[Sat Jun  1 17:55:07 2013] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 17:55:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:55:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:55:08 2013] Assessing source extent using major
[Sat Jun  1 17:55:08 2013] Source does appear to be extended
[Sat Jun  1 17:55:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:55:08 2013] Source is confused with source 44
[Sat Jun  1 17:57:02 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:57:02 2013] Initial guess for spatial extent in simple fitting = 10.86"
[Sat Jun  1 17:57:02 2013] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.947
[Sat Jun  1 17:57:02 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 10.86"
[Sat Jun  1 17:57:04 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src22.ximg exists
[Sat Jun  1 17:57:04 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Jun  1 17:57:04 2013] Fit fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src22 appears to have run properly
[Sat Jun  1 17:57:07 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Jun  1 17:57:07 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Jun  1 17:57:07 2013] Fit fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Jun  1 17:58:27 2013] Warning, spatial fit 22 centroid is now closest to src. 44
[Sat Jun  1 17:58:28 2013] Spatial fit model total counts = 17169.300000, observed total counts = 15549.000000
[Sat Jun  1 17:58:28 2013] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 17:58:29 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:58:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:58:29 2013] Assessing source extent using major
[Sat Jun  1 17:58:29 2013] Source does appear to be extended
[Sat Jun  1 17:58:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:54:15 2013] Counts = 1352.551880, rescaling region sizes by 2.000000
[Sun Jun  2 09:54:15 2013] XMMSAS src. selection expression = ellipse(26680.314484, 36511.410065, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  2 09:54:15 2013] Not overwriting source region fullrun_mos2_xmm0650221401_pi300-10000_pass1_cl_src45_src.reg
[Sun Jun  2 09:54:15 2013] Extracting stamp from image fullrun_mos2_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (232, 345) - (382, 495)
[Sun Jun  2 09:54:15 2013] XMMSAS bgd. selection expression = annulus(26680.314484, 36511.410065, 4350.000000, 8700.000000, X, Y) && !ellipse(16683.591600, 35946.248000, 5870.760169, 5870.760169, 0.000000, X, Y) && !ellipse(17608.712601, 35614.227875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26937.414000, 33721.608000, 2955.336085, 2955.336085, 0.000000, X, Y) && !ellipse(17436.407837, 35191.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15053.150000, 26320.202600, 10468.368301, 10468.368301, 0.000000, X, Y) && !ellipse(19262.339188, 32485.767029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28011.352000, 36726.878000, 1783.680051, 1783.680051, 0.000000, X, Y) && !ellipse(19124.399796, 38483.103851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19179.527496, 37095.412964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27031.009338, 34053.675995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17656.653137, 32224.923676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19680.868713, 37797.569977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27825.737400, 37012.236000, 886.144025, 886.144025, 0.000000, X, Y) && !ellipse(27408.269200, 38084.188800, 1844.024053, 786.163223, 244.482000, X, Y) && !ellipse(31494.904000, 30102.690000, 1521.368044, 1521.368044, 0.000000, X, Y) && !ellipse(18102.892000, 38521.935400, 2001.656058, 2001.656058, 0.000000, X, Y) && !ellipse(25038.988647, 40654.397430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25880.164000, 39990.344000, 1924.584055, 1924.584055, 0.000000, X, Y) && !ellipse(27345.240000, 34579.586000, 1576.192045, 1576.192045, 0.000000, X, Y) && !ellipse(24307.814819, 39104.388672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26065.940704, 37091.488831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27097.552338, 36125.751129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36258.036000, 33056.114000, 1521.368044, 1382.760040, 314.091000, X, Y) && !ellipse(31795.172668, 30395.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19892.667038, 31965.707855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35174.050568, 32394.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25913.750000, 35876.794000, 1662.408048, 1662.408048, 0.000000, X, Y) && !ellipse(26088.917328, 33940.492096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26281.409607, 39354.134003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19961.144226, 27860.530762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34210.606800, 31859.486600, 2127.296061, 977.176028, 340.224000, X, Y) && !ellipse(19998.738113, 29278.589874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24744.346771, 38667.461121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18008.760000, 30855.058000, 1672.272048, 1672.272048, 0.000000, X, Y) && !ellipse(35619.413147, 32582.776489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31913.236511, 29261.433075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.466583, 38662.785614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20108.227539, 28875.713074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17173.242661, 32293.524323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32706.240662, 30044.626892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22797.182800, 36149.187073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25813.604065, 39380.883423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27528.235260, 33625.608276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19049.810730, 36234.697601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24863.369080, 33208.824432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21985.584152, 34216.487701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20743.280014, 33790.039551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.576050, 38854.539795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33089.042786, 31803.297058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22353.984070, 29822.626617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26589.892151, 34928.654175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31727.182678, 31263.131348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.822327, 32673.352814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19518.630493, 36586.297821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36070.882294, 32321.049011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.871429, 35449.554993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20609.214310, 32569.602234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28041.664825, 33624.360413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18851.591553, 35805.347504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32478.285156, 32127.346039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25318.579163, 33468.988098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33385.553802, 31273.010712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32163.422577, 31265.932404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31430.323853, 31618.687561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23639.591736, 39795.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33361.488617, 32309.470428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21194.567291, 28462.194916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17435.947189, 32915.342804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.730896, 32279.542938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32789.162537, 28835.712402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31722.881531, 32572.573212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25430.565643, 36485.712036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30915.234894, 31951.511414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18916.824295, 31271.306183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30462.212555, 32356.780396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20876.833298, 34314.375977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17145.687439, 27710.380890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24346.742859, 32696.802032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20411.340000, 27277.414000, 1446.168042, 1446.168042, 0.000000, X, Y) && !ellipse(17528.257248, 27349.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21220.480377, 32292.966766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35641.776459, 33622.862976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20753.389038, 36059.871887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31483.806763, 39027.554779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21606.074265, 28958.725220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20436.182068, 34568.470245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27673.847687, 33105.031372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25089.444824, 34067.577728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22776.109833, 32742.635803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20771.621124, 36467.185242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24167.751404, 35279.248138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32988.061401, 28079.167114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17164.348312, 28914.500397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21645.772263, 33729.494263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18222.881943, 33852.538940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.171173, 32860.065094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20698.532150, 35168.952911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31087.509125, 33796.446136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20096.436554, 35517.213104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17283.253799, 28194.161743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31376.360382, 38059.207184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31610.881775, 33096.078613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21276.619644, 33013.140808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34487.993652, 28489.326660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30319.478180, 39605.822815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.237259, 35973.933899, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:54:15 2013] Writing fullrun_mos2_xmm0650221401_pi300-10000_pass1_cl_src45.gif