[Sat Jun  1 17:49:14 2013] Detection parameters:
  Position = (135.7, 253.0) = 8 23 5.09 -43 1 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1459.5 +/- 66.1
  Background counts = 849.0
  Rate = 0.05 +/- 0.002

[Sat Jun  1 17:49:56 2013] Off-axis axis estimate = 12.25'
[Sat Jun  1 17:53:23 2013] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:23 2013] Initial guess for spatial extent in simple fitting = 12.55"
[Sat Jun  1 17:53:23 2013] source mask rpix=2.9, npix_max = 45, mask sum = 41, frac = 0.894
[Sat Jun  1 17:53:23 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 12.55"
[Sat Jun  1 17:53:24 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun  1 17:53:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src19.csv
[Sat Jun  1 17:53:24 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun  1 17:53:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src19.csv
[Sat Jun  1 17:53:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:28 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun  1 17:53:28 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun  1 17:53:28 2013] Fit fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Jun  1 17:55:05 2013] Warning, spatial fit 19 centroid is now closest to src. 9
[Sat Jun  1 17:55:07 2013] Warning: source 84 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.332787 pixels away
[Sat Jun  1 17:55:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:55:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:55:08 2013] Assessing source extent using major
[Sat Jun  1 17:55:08 2013] Source does appear to be extended
[Sat Jun  1 17:55:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:55:08 2013] Source is confused with source 9
[Sat Jun  1 17:57:02 2013] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:57:02 2013] Initial guess for spatial extent in simple fitting = 12.55"
[Sat Jun  1 17:57:02 2013] source mask rpix=2.9, npix_max = 45, mask sum = 41, frac = 0.894
[Sat Jun  1 17:57:02 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 12.55"
[Sat Jun  1 17:57:04 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src19.ximg exists
[Sat Jun  1 17:57:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src19.csv
[Sat Jun  1 17:57:04 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Jun  1 17:57:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src19.csv
[Sat Jun  1 17:57:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:07 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Jun  1 17:57:07 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jun  1 17:57:07 2013] Fit fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Jun  1 17:58:27 2013] Warning, spatial fit 19 centroid is now closest to src. 9
[Sat Jun  1 17:58:29 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:58:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:58:29 2013] Assessing source extent using major
[Sat Jun  1 17:58:29 2013] Source does appear to be extended
[Sat Jun  1 17:58:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:54:13 2013] Counts = 1459.470459, rescaling region sizes by 2.000000
[Sun Jun  2 09:54:13 2013] XMMSAS src. selection expression = ellipse(11759.546326, 21964.827133, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  2 09:54:13 2013] Not overwriting source region fullrun_mos2_xmm0650221401_pi300-10000_pass1_cl_src19_src.reg
[Sun Jun  2 09:54:13 2013] Extracting stamp from image fullrun_mos2_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (61, 178) - (211, 328)
[Sun Jun  2 09:54:14 2013] XMMSAS bgd. selection expression = annulus(11759.546326, 21964.827133, 4350.000000, 8700.000000, X, Y) && !ellipse(16683.591600, 35946.248000, 5870.760169, 5870.760169, 0.000000, X, Y) && !ellipse(17602.220000, 25539.212000, 624.357618, 624.357618, 0.000000, X, Y) && !ellipse(11150.310000, 21441.518000, 2008.368058, 2008.368058, 0.000000, X, Y) && !ellipse(18331.703400, 24985.402000, 1543.320044, 1543.320044, 0.000000, X, Y) && !ellipse(12100.704600, 22607.393780, 1164.088033, 1164.088033, 0.000000, X, Y) && !ellipse(15053.150000, 26320.202600, 10468.368301, 10468.368301, 0.000000, X, Y) && !ellipse(10379.770000, 20698.752000, 1750.328050, 1750.328050, 0.000000, X, Y) && !ellipse(17019.086000, 15347.520000, 2144.912062, 2144.912062, 0.000000, X, Y) && !ellipse(13152.093400, 29208.862520, 1146.768033, 1146.768033, 0.000000, X, Y) && !ellipse(14650.662155, 26825.164917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16984.922000, 26090.926000, 691.192820, 691.192820, 0.000000, X, Y) && !ellipse(15173.960464, 26047.782959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13738.011765, 29190.461487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16035.201523, 26390.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17439.514000, 15030.956000, 1535.984044, 1535.984044, 0.000000, X, Y) && !ellipse(14574.486000, 26326.885400, 1744.728050, 1744.728050, 0.000000, X, Y) && !ellipse(16560.472519, 25704.490326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16875.510000, 19815.492800, 1753.616050, 811.680023, 26.619000, X, Y) && !ellipse(17513.754150, 24735.178955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14888.740000, 14585.276000, 1043.688030, 1043.688030, 0.000000, X, Y) && !ellipse(16585.555908, 16219.408783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16469.306778, 19874.810638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11804.362600, 30197.335600, 616.290418, 616.290418, 0.000000, X, Y) && !ellipse(14084.380000, 26579.986000, 1673.168048, 1673.168048, 0.000000, X, Y) && !ellipse(12191.053635, 21894.016174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16777.814545, 16572.771942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15736.506000, 15466.338000, 2025.584058, 788.196023, 135.905000, X, Y) && !ellipse(16273.708115, 31522.671082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12697.049400, 26991.535600, 1896.920055, 1896.920055, 0.000000, X, Y) && !ellipse(9616.291847, 29703.129059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19228.087982, 17429.916290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19189.436000, 26033.890000, 1350.464039, 1350.464039, 0.000000, X, Y) && !ellipse(14846.492000, 28621.226000, 647.787219, 647.787219, 0.000000, X, Y) && !ellipse(17976.211136, 19431.331802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16084.604000, 27207.009400, 382.185611, 382.185611, 0.000000, X, Y) && !ellipse(16723.434000, 26886.288000, 916.344026, 916.344026, 0.000000, X, Y) && !ellipse(10059.997025, 29360.184235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12080.699000, 30096.872000, 1586.704046, 1586.704046, 0.000000, X, Y) && !ellipse(14066.280000, 29277.425980, 1869.248054, 1869.248054, 0.000000, X, Y) && !ellipse(11084.696289, 28313.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12712.050034, 22571.505310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16092.321800, 14376.287600, 1069.904031, 1069.904031, 0.000000, X, Y) && !ellipse(10399.839447, 29010.036316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15633.945618, 14237.854218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10725.053000, 19396.020000, 2065.824059, 1131.240033, 51.515000, X, Y) && !ellipse(17955.124893, 14759.137360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9954.721794, 27775.516724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19961.144226, 27860.530762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13563.760000, 15892.946000, 2084.976060, 2084.976060, 0.000000, X, Y) && !ellipse(19998.738113, 29278.589874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18008.760000, 30855.058000, 1672.272048, 1672.272048, 0.000000, X, Y) && !ellipse(10006.699966, 28400.404419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16844.600000, 29776.810000, 1121.992032, 1121.992032, 0.000000, X, Y) && !ellipse(14414.400391, 29785.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15830.385925, 28735.442566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19928.475418, 14994.072937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15364.777420, 28398.423767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17494.786621, 16802.283295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16573.560486, 30796.233826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12733.400452, 21704.934280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10556.910980, 30208.014740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20108.227539, 28875.713074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15631.882660, 27356.138916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11519.802490, 28063.515717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16026.214249, 29700.880249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19262.838333, 17804.908646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16259.337769, 19368.240341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11196.692062, 30245.471893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19458.227249, 16827.952118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15392.133514, 30151.555542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12127.022293, 26405.781799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15280.156326, 21797.301422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11175.224823, 25429.694794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10169.788460, 30385.625580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20510.528198, 17170.338058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11660.673035, 30803.301514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19059.636993, 18384.918381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15003.212875, 12920.115387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18820.574173, 15770.167206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12926.491440, 23198.973694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15834.162704, 23740.294342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18536.805969, 17858.781845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14478.784851, 22391.568665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21194.567291, 28462.194916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15620.200531, 12919.875107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15975.833740, 22926.554413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13161.825272, 18586.972748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18119.892029, 20144.235046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10969.464035, 29530.068939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15484.902000, 27812.114000, 1687.400049, 1687.400049, 0.000000, X, Y) && !ellipse(10895.775688, 31175.934875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14822.317764, 27864.786774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11884.550415, 24830.242279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11424.948914, 26728.394409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18916.824295, 31271.306183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16588.495026, 22844.726410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10833.650658, 28982.169128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17145.687439, 27710.380890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12097.451904, 31285.401733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13473.633240, 21701.344681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20411.340000, 27277.414000, 1446.168042, 1446.168042, 0.000000, X, Y) && !ellipse(14822.956299, 22129.642059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18653.854800, 26939.234000, 818.632024, 818.632024, 0.000000, X, Y) && !ellipse(17528.257248, 27349.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16050.866000, 30235.946000, 935.600027, 935.600027, 0.000000, X, Y) && !ellipse(15785.894272, 30750.360229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11843.808990, 24035.541565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12300.808563, 31300.737183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14270.550903, 28054.637299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14999.797180, 30561.335419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16309.304092, 30232.435699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15736.509399, 21620.749939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13301.758591, 19249.352112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21158.733688, 12980.038071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10607.619385, 30821.618561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17164.348312, 28914.500397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20779.836000, 13959.902000, 3757.328108, 3757.328108, 0.000000, X, Y) && !ellipse(19991.262878, 26675.299133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15627.162018, 23962.209656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14535.573273, 20136.284561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17336.391556, 24350.114746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12700.687836, 19219.703400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17283.253799, 28194.161743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15604.993851, 16476.107635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15796.256851, 16837.807587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16797.404678, 28265.629822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14327.578278, 21431.005615, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:54:14 2013] Writing fullrun_mos2_xmm0650221401_pi300-10000_pass1_cl_src19.gif