[Sat Jun  1 17:49:27 2013] Detection parameters:
  Position = (115.6, 327.0) = 8 23 12.98 -42 56 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 699.0 +/- 52.0
  Background counts = 761.5
  Rate = 0.03 +/- 0.002

[Sat Jun  1 17:49:56 2013] Off-axis axis estimate = 13.42'
[Sat Jun  1 17:53:23 2013] Using EEF radius (= 13.14 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:23 2013] Initial guess for spatial extent in simple fitting = 13.14"
[Sat Jun  1 17:53:23 2013] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.807
[Sat Jun  1 17:53:23 2013] Giving source the simple spatial ID 98 for pass 0, mean size = 13.14"
[Sat Jun  1 17:53:27 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src98.ximg exists
[Sat Jun  1 17:53:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src98.csv
[Sat Jun  1 17:53:27 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src98_1.ximg exists
[Sat Jun  1 17:53:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src98.csv
[Sat Jun  1 17:53:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:37 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Sat Jun  1 17:53:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src98.csv
[Sat Jun  1 17:53:37 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Sat Jun  1 17:53:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src98.csv
[Sat Jun  1 17:53:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:55:08 2013] Warning, spatial fit 98 centroid is now closest to src. 118
[Sat Jun  1 17:55:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:55:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:55:08 2013] Assessing source extent using major
[Sat Jun  1 17:55:08 2013] Source does appear to be extended
[Sat Jun  1 17:55:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:55:08 2013] Source is confused with source 144
[Sat Jun  1 17:57:02 2013] Using EEF radius (= 13.14 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:57:02 2013] Initial guess for spatial extent in simple fitting = 13.14"
[Sat Jun  1 17:57:02 2013] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.807
[Sat Jun  1 17:57:02 2013] Giving source the simple spatial ID 98 for pass 1, mean size = 13.14"
[Sat Jun  1 17:57:06 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src98.ximg exists
[Sat Jun  1 17:57:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src98.csv
[Sat Jun  1 17:57:06 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src98_1.ximg exists
[Sat Jun  1 17:57:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src98.csv
[Sat Jun  1 17:57:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:08 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src98.ximg exists
[Sat Jun  1 17:57:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src98.csv
[Sat Jun  1 17:57:08 2013] fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src98_1.ximg exists
[Sat Jun  1 17:57:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src98.csv
[Sat Jun  1 17:57:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:58:29 2013] Warning, spatial fit 98 centroid is now closest to src. 146
[Sat Jun  1 17:58:29 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:58:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:58:29 2013] Assessing source extent using major
[Sat Jun  1 17:58:29 2013] Source does appear to be extended
[Sat Jun  1 17:58:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:54:50 2013] XMMSAS src. selection expression = ellipse(10006.699966, 28400.404419, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 09:54:50 2013] Not overwriting source region fullrun_mos2_xmm0650221401_pi300-10000_pass1_cl_src130_src.reg
[Sun Jun  2 09:54:50 2013] Extracting stamp from image fullrun_mos2_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (78, 289) - (153, 364)
[Sun Jun  2 09:54:50 2013] XMMSAS bgd. selection expression = annulus(10006.699966, 28400.404419, 1087.500000, 2175.000000, X, Y) && !ellipse(16683.591600, 35946.248000, 5870.760169, 5870.760169, 0.000000, X, Y) && !ellipse(15053.150000, 26320.202600, 10468.368301, 10468.368301, 0.000000, X, Y) && !ellipse(13152.093400, 29208.862520, 1146.768033, 1146.768033, 0.000000, X, Y) && !ellipse(11804.362600, 30197.335600, 616.290418, 616.290418, 0.000000, X, Y) && !ellipse(12697.049400, 26991.535600, 1896.920055, 1896.920055, 0.000000, X, Y) && !ellipse(9616.291847, 29703.129059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10059.997025, 29360.184235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12080.699000, 30096.872000, 1586.704046, 1586.704046, 0.000000, X, Y) && !ellipse(11084.696289, 28313.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10399.839447, 29010.036316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9954.721794, 27775.516724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10556.910980, 30208.014740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11519.802490, 28063.515717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11196.692062, 30245.471893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12127.022293, 26405.781799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11175.224823, 25429.694794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10169.788460, 30385.625580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11660.673035, 30803.301514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10969.464035, 29530.068939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10895.775688, 31175.934875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11424.948914, 26728.394409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10833.650658, 28982.169128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12097.451904, 31285.401733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12300.808563, 31300.737183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10607.619385, 30821.618561, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:54:50 2013] Writing fullrun_mos2_xmm0650221401_pi300-10000_pass1_cl_src130.gif