[Sat Jun  1 17:48:33 2013] Detection parameters:
  Position = (238.7, 293.8) = 8 22 24.21 -42 58 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1129.0 +/- 52.1
  Background counts = 564.8
  Rate = 0.06 +/- 0.003

[Sat Jun  1 17:49:11 2013] Off-axis axis estimate = 4.34'
[Sat Jun  1 17:53:16 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:16 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Sat Jun  1 17:53:16 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.896
[Sat Jun  1 17:53:16 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 8.60"
[Sat Jun  1 17:53:19 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src51.ximg exists
[Sat Jun  1 17:53:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src51.csv
[Sat Jun  1 17:53:19 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat Jun  1 17:53:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src51.csv
[Sat Jun  1 17:53:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:22 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat Jun  1 17:53:22 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat Jun  1 17:53:22 2013] Fit fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sat Jun  1 17:54:31 2013] Warning, spatial fit 51 centroid is now closest to src. 92
[Sat Jun  1 17:54:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:54:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:54:33 2013] Assessing source extent using major
[Sat Jun  1 17:54:33 2013] Source does appear to be extended
[Sat Jun  1 17:54:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:54:34 2013] Source is confused with source 98
[Sat Jun  1 17:56:56 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:56:56 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Sat Jun  1 17:56:56 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.896
[Sat Jun  1 17:56:56 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 8.60"
[Sat Jun  1 17:56:58 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src49.ximg exists
[Sat Jun  1 17:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src49.csv
[Sat Jun  1 17:56:58 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src49_1.ximg exists
[Sat Jun  1 17:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src49.csv
[Sat Jun  1 17:56:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:00 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sat Jun  1 17:57:00 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sat Jun  1 17:57:00 2013] Fit fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Sat Jun  1 17:57:57 2013] Warning, spatial fit 49 centroid is now closest to src. 98
[Sat Jun  1 17:57:57 2013] Spatial fit model total counts = 11692.400000, observed total counts = 11789.000000
[Sat Jun  1 17:57:57 2013] Offset between fit and detection position for source 94 = 1.602100 pixels
[Sat Jun  1 17:57:57 2013] Warning, changing simple spatial fit ID from 49 to 70
[Sat Jun  1 17:57:57 2013] 10894.992000 total counts/ 10200.700000 bgd. counts: snr = 6.874279
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 1.602100 pixels
  Position = (240.3, 294.2) = 8 22 23.60 -42 58 59.3
  Extent = 16.9" x 7.2", rotation angle = 307
  Source counts = 694.3 +/- 104.4
  Background counts = 10200.7
  Rate = 0.03 +/- 0.004
[Sat Jun  1 17:57:58 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:57:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:57:58 2013] Assessing source extent using major
[Sat Jun  1 17:57:58 2013] Source does appear to be extended
[Sat Jun  1 17:57:58 2013] Computing asymmetry using major and minor axis, asym = 2.34
[Sat Jun  1 17:57:58 2013] Source is asymmetric
[Sun Jun  2 09:52:19 2013] XMMSAS src. selection expression = ellipse(20853.828657, 25550.160174, 1014.780029, 433.581391, 306.734018, X, Y)
[Sun Jun  2 09:52:19 2013] Not overwriting source region fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src94_src.reg
[Sun Jun  2 09:52:19 2013] Extracting stamp from image fullrun_mos1_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (182, 236) - (299, 353)
[Sun Jun  2 09:52:19 2013] XMMSAS bgd. selection expression = annulus(20853.828657, 25550.160174, 1691.300049, 3382.600097, X, Y) && !ellipse(19374.494000, 21314.720000, 1515.488044, 1515.488044, 0.000000, X, Y) && !ellipse(18914.650000, 24901.982000, 1580.808045, 1580.808045, 0.000000, X, Y) && !ellipse(31927.404000, 29800.158000, 9815.952282, 9815.952282, 0.000000, X, Y) && !ellipse(20082.610000, 23871.419800, 1429.408041, 1429.408041, 0.000000, X, Y) && !ellipse(12238.016000, 22732.206000, 5949.192171, 5394.120155, 86.584000, X, Y) && !ellipse(21123.800140, 27511.800629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22615.284000, 29141.398000, 750.896022, 750.896022, 0.000000, X, Y) && !ellipse(21375.220000, 22977.542000, 1366.296039, 1366.296039, 0.000000, X, Y) && !ellipse(19543.640869, 25170.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.360000, 26375.282000, 655.304819, 655.304819, 0.000000, X, Y) && !ellipse(21826.364700, 28395.681122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21974.918900, 22731.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18821.512000, 24709.968000, 1475.608042, 1475.608042, 0.000000, X, Y) && !ellipse(22816.389200, 27972.970000, 1215.696035, 1215.696035, 0.000000, X, Y) && !ellipse(21392.047043, 27008.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19969.504000, 25740.568000, 815.864023, 815.864023, 0.000000, X, Y) && !ellipse(23925.372000, 29892.290000, 1315.744038, 1315.744038, 0.000000, X, Y) && !ellipse(23307.474121, 29343.842529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22516.048400, 25001.043600, 1264.048036, 1264.048036, 0.000000, X, Y) && !ellipse(33830.278000, 31635.908000, 10886.160313, 10886.160313, 0.000000, X, Y) && !ellipse(21052.847137, 26120.716614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23016.379364, 24581.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20845.670800, 25190.440000, 1368.232039, 1368.232039, 0.000000, X, Y) && !ellipse(25264.344000, 22809.919000, 1239.288036, 1239.288036, 0.000000, X, Y) && !ellipse(24616.408875, 22507.994354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22918.472000, 22235.514340, 718.919221, 718.919221, 0.000000, X, Y) && !ellipse(22302.317200, 22381.291046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21404.524353, 24413.508881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21571.000000, 21421.099701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21311.573105, 21975.133957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.904000, 22044.422000, 612.195218, 612.195218, 0.000000, X, Y) && !ellipse(21864.054169, 26040.855988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23929.879364, 22745.109711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24505.009155, 23128.774719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22346.969482, 23562.402069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21836.329025, 21769.723633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23443.634000, 26793.632000, 2431.392070, 2431.392070, 0.000000, X, Y) && !ellipse(22649.602997, 27095.916840, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:19 2013] Writing fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src94.gif