[Sat Jun  1 17:48:32 2013] Detection parameters:
  Position = (238.7, 306.9) = 8 22 24.23 -42 58 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1622.2 +/- 60.3
  Background counts = 540.9
  Rate = 0.1 +/- 0.004

[Sat Jun  1 17:49:11 2013] Off-axis axis estimate = 4.38'
[Sat Jun  1 17:53:16 2013] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:16 2013] Initial guess for spatial extent in simple fitting = 8.62"
[Sat Jun  1 17:53:16 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.894
[Sat Jun  1 17:53:16 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 8.62"
[Sat Jun  1 17:53:18 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src24.ximg exists
[Sat Jun  1 17:53:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src24.csv
[Sat Jun  1 17:53:18 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Jun  1 17:53:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src24.csv
[Sat Jun  1 17:53:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:21 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Jun  1 17:53:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jun  1 17:53:21 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Jun  1 17:53:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jun  1 17:53:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:54:30 2013] Spatial fit model total counts = 13862.300000, observed total counts = 10168.000000
[Sat Jun  1 17:54:30 2013] Poor agreement between spatial fit and data for source 87
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 17:54:32 2013] Spatial fit model total counts = 11595.300000, observed total counts = 11789.000000
[Sat Jun  1 17:54:32 2013] Offset between fit and detection position for source 87 = 3.820230 pixels
[Sat Jun  1 17:54:32 2013] Warning, changing simple spatial fit ID from 24 to 74
[Sat Jun  1 17:54:32 2013] 10473.547000 total counts/ 9640.170000 bgd. counts: snr = 8.487879
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 3.820230 pixels
  Position = (236.5, 303.7) = 8 22 25.10 -42 58 18.0
  Extent = 8.2 (7.3-9.4)", rotation angle = 0
  Source counts = 833.4 +/- 102.3
  Background counts = 9640.2
  Rate = 0.03 +/- 0.004
[Sat Jun  1 17:54:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:54:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:54:33 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 17:54:33 2013] Source does appear to be extended
[Sat Jun  1 17:54:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:54:33 2013] Source is confused with source 86
[Sat Jun  1 17:56:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:56:56 2013] Initial guess for spatial extent in simple fitting = 8.19"
[Sat Jun  1 17:56:56 2013] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.924
[Sat Jun  1 17:56:56 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 8.19"
[Sat Jun  1 17:56:57 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src23.ximg exists
[Sat Jun  1 17:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src23.csv
[Sat Jun  1 17:56:57 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Jun  1 17:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src23.csv
[Sat Jun  1 17:56:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:56:59 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Jun  1 17:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sat Jun  1 17:56:59 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Jun  1 17:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sat Jun  1 17:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:56 2013] Warning, spatial fit 23 centroid is now closest to src. 92
[Sat Jun  1 17:57:58 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:57:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:57:58 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 17:57:58 2013] Source does appear to be extended
[Sat Jun  1 17:57:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:52:10 2013] XMMSAS src. selection expression = ellipse(20524.360000, 26375.282000, 491.478614, 491.478614, 0.000000, X, Y)
[Sun Jun  2 09:52:10 2013] Not overwriting source region fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src87_src.reg
[Sun Jun  2 09:52:10 2013] Extracting stamp from image fullrun_mos1_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (208, 275) - (265, 332)
[Sun Jun  2 09:52:10 2013] XMMSAS bgd. selection expression = annulus(20524.360000, 26375.282000, 819.131024, 1638.262047, X, Y) && !ellipse(18914.650000, 24901.982000, 1580.808045, 1580.808045, 0.000000, X, Y) && !ellipse(31927.404000, 29800.158000, 9815.952282, 9815.952282, 0.000000, X, Y) && !ellipse(20082.610000, 23871.419800, 1429.408041, 1429.408041, 0.000000, X, Y) && !ellipse(21123.800140, 27511.800629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19543.640869, 25170.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21826.364700, 28395.681122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18821.512000, 24709.968000, 1475.608042, 1475.608042, 0.000000, X, Y) && !ellipse(22816.389200, 27972.970000, 1215.696035, 1215.696035, 0.000000, X, Y) && !ellipse(21392.047043, 27008.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20853.828657, 25550.160174, 1353.040039, 578.108521, 306.734018, X, Y) && !ellipse(19969.504000, 25740.568000, 815.864023, 815.864023, 0.000000, X, Y) && !ellipse(22516.048400, 25001.043600, 1264.048036, 1264.048036, 0.000000, X, Y) && !ellipse(21052.847137, 26120.716614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23016.379364, 24581.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20845.670800, 25190.440000, 1368.232039, 1368.232039, 0.000000, X, Y) && !ellipse(21404.524353, 24413.508881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21864.054169, 26040.855988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23443.634000, 26793.632000, 2431.392070, 2431.392070, 0.000000, X, Y) && !ellipse(22649.602997, 27095.916840, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:10 2013] Writing fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src87.gif