[Sat Jun  1 17:48:32 2013] Detection parameters:
  Position = (251.4, 326.9) = 8 22 19.16 -42 56 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1637.5 +/- 59.5
  Background counts = 592.8
  Rate = 0.09 +/- 0.003

[Sat Jun  1 17:49:11 2013] Off-axis axis estimate = 3.99'
[Sat Jun  1 17:53:16 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:16 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Sat Jun  1 17:53:16 2013] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.801
[Sat Jun  1 17:53:16 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 8.42"
[Sat Jun  1 17:53:18 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jun  1 17:53:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src25.csv
[Sat Jun  1 17:53:18 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jun  1 17:53:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src25.csv
[Sat Jun  1 17:53:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:21 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jun  1 17:53:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Jun  1 17:53:21 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jun  1 17:53:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Jun  1 17:53:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:54:30 2013] Warning, spatial fit 25 centroid is now closest to src. 84
[Sat Jun  1 17:54:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:54:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:54:33 2013] Assessing source extent using major
[Sat Jun  1 17:54:33 2013] Source does appear to be extended
[Sat Jun  1 17:54:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:56:56 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:56:56 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Sat Jun  1 17:56:56 2013] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.801
[Sat Jun  1 17:56:56 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 8.42"
[Sat Jun  1 17:56:57 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src24.ximg exists
[Sat Jun  1 17:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src24.csv
[Sat Jun  1 17:56:57 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat Jun  1 17:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src24.csv
[Sat Jun  1 17:56:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:56:59 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat Jun  1 17:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat Jun  1 17:56:59 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Jun  1 17:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat Jun  1 17:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:56 2013] Spatial fit model total counts = 6391.380000, observed total counts = 10285.000000
[Sat Jun  1 17:57:56 2013] Poor agreement between spatial fit and data for source 83
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 17:57:56 2013] Warning, spatial fit 24 centroid is now closest to src. 84
[Sat Jun  1 17:57:58 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:57:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:57:58 2013] Assessing source extent using major
[Sat Jun  1 17:57:58 2013] Source does appear to be extended
[Sat Jun  1 17:57:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:52:10 2013] Counts = 1637.461426, rescaling region sizes by 2.000000
[Sun Jun  2 09:52:10 2013] XMMSAS src. selection expression = ellipse(21826.364700, 28395.681122, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:10 2013] Not overwriting source region fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src83_src.reg
[Sun Jun  2 09:52:10 2013] Extracting stamp from image fullrun_mos1_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (176, 252) - (326, 402)
[Sun Jun  2 09:52:10 2013] XMMSAS bgd. selection expression = annulus(21826.364700, 28395.681122, 4350.000000, 8700.000000, X, Y) && !ellipse(26599.956600, 23997.724000, 1175.997634, 1175.997634, 0.000000, X, Y) && !ellipse(23143.924316, 21007.624023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26838.668600, 33433.201000, 1533.784044, 1533.784044, 0.000000, X, Y) && !ellipse(19374.494000, 21314.720000, 1515.488044, 1515.488044, 0.000000, X, Y) && !ellipse(28461.151489, 23616.790344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10876.376000, 21199.790000, 6086.952175, 6086.952175, -0.000000, X, Y) && !ellipse(18914.650000, 24901.982000, 1580.808045, 1580.808045, 0.000000, X, Y) && !ellipse(31927.404000, 29800.158000, 9815.952282, 9815.952282, 0.000000, X, Y) && !ellipse(20082.610000, 23871.419800, 1429.408041, 1429.408041, 0.000000, X, Y) && !ellipse(31360.231079, 30139.021149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.016000, 22732.206000, 5949.192171, 5394.120155, 86.584000, X, Y) && !ellipse(21123.800140, 27511.800629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.154000, 36739.288000, 865.440025, 865.440025, 0.000000, X, Y) && !ellipse(22615.284000, 29141.398000, 750.896022, 750.896022, 0.000000, X, Y) && !ellipse(21375.220000, 22977.542000, 1366.296039, 1366.296039, 0.000000, X, Y) && !ellipse(19543.640869, 25170.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19990.357513, 37349.318726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27211.311400, 22514.352600, 667.723219, 667.723219, 0.000000, X, Y) && !ellipse(20524.360000, 26375.282000, 655.304819, 655.304819, 0.000000, X, Y) && !ellipse(26414.545540, 22905.580800, 1221.960035, 1221.960035, 0.000000, X, Y) && !ellipse(27260.324219, 34425.204865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24359.731262, 20512.271225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21974.918900, 22731.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18821.512000, 24709.968000, 1475.608042, 1475.608042, 0.000000, X, Y) && !ellipse(31756.740000, 31452.754000, 3093.168089, 3093.168089, 0.000000, X, Y) && !ellipse(25454.837921, 33532.822968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27942.294000, 34083.878000, 870.304025, 870.304025, 0.000000, X, Y) && !ellipse(27293.257202, 23351.417511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23341.936401, 29970.655121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.126000, 31784.594200, 1549.368045, 688.026420, 215.607000, X, Y) && !ellipse(22816.389200, 27972.970000, 1215.696035, 1215.696035, 0.000000, X, Y) && !ellipse(21392.047043, 27008.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20853.828657, 25550.160174, 1353.040039, 578.108521, 306.734018, X, Y) && !ellipse(18347.227585, 20216.204926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19969.504000, 25740.568000, 815.864023, 815.864023, 0.000000, X, Y) && !ellipse(26928.620789, 26024.936432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17860.034000, 19590.010000, 1000.720029, 1000.720029, 0.000000, X, Y) && !ellipse(23925.372000, 29892.290000, 1315.744038, 1315.744038, 0.000000, X, Y) && !ellipse(26710.856600, 26871.216600, 1010.904029, 1010.904029, 0.000000, X, Y) && !ellipse(27340.360000, 36378.722000, 2520.496073, 2520.496073, 0.000000, X, Y) && !ellipse(23307.474121, 29343.842529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.948800, 22804.905600, 1126.992032, 1126.992032, 0.000000, X, Y) && !ellipse(22516.048400, 25001.043600, 1264.048036, 1264.048036, 0.000000, X, Y) && !ellipse(25603.676208, 28102.127808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31031.416321, 30857.596863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22343.743622, 19532.796402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28936.188000, 25355.169800, 834.968024, 834.968024, 0.000000, X, Y) && !ellipse(33830.278000, 31635.908000, 10886.160313, 10886.160313, 0.000000, X, Y) && !ellipse(21052.847137, 26120.716614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23016.379364, 24581.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20845.670800, 25190.440000, 1368.232039, 1368.232039, 0.000000, X, Y) && !ellipse(15775.754715, 21606.306580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28252.537872, 34489.520294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27387.850000, 38173.150000, 1169.240034, 1169.240034, 0.000000, X, Y) && !ellipse(22607.637604, 21291.324524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27708.057739, 37630.887238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12871.005310, 21409.908752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25264.344000, 22809.919000, 1239.288036, 1239.288036, 0.000000, X, Y) && !ellipse(27496.563416, 26008.982361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31387.530200, 24118.674600, 1411.040041, 1411.040041, 0.000000, X, Y) && !ellipse(24616.408875, 22507.994354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23025.979950, 20165.675735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32151.557251, 25460.309937, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26579.755249, 35091.943787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30563.926000, 32241.916000, 2237.392064, 734.993621, 39.424000, X, Y) && !ellipse(24043.148224, 31613.438568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22918.472000, 22235.514340, 718.919221, 718.919221, 0.000000, X, Y) && !ellipse(22302.317200, 22381.291046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26525.486450, 25115.424286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23140.340027, 19848.934723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28656.771393, 21608.746552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21404.524353, 24413.508881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21571.000000, 21421.099701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28931.988000, 23909.372000, 1257.232036, 336.444810, 297.837025, X, Y) && !ellipse(28653.789795, 29802.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27174.546000, 25503.248000, 1096.504032, 1096.504032, 0.000000, X, Y) && !ellipse(25351.955536, 19208.025253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21311.573105, 21975.133957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17042.025803, 19597.310959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21891.407608, 37187.101746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21453.814972, 20481.934860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17979.075912, 19099.150467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22676.474548, 36315.906982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12816.453751, 23760.297333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31980.509644, 23230.823425, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24171.904000, 22044.422000, 612.195218, 612.195218, 0.000000, X, Y) && !ellipse(31033.304047, 31409.325226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.434113, 18838.583237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24104.798004, 20326.566528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21864.054169, 26040.855988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19409.196823, 19558.187775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.134000, 35541.812000, 972.000028, 972.000028, 0.000000, X, Y) && !ellipse(23929.879364, 22745.109711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.251282, 30415.930084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22328.931213, 20148.935776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18922.678635, 19906.737366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29449.318878, 32429.698120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16414.096771, 19926.631500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17102.628174, 20069.426941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.572540, 33795.025696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24505.009155, 23128.774719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22346.969482, 23562.402069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28897.765747, 29450.755249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.674194, 32561.669006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21836.329025, 21769.723633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15202.700000, 21782.144200, 830.024024, 830.024024, 0.000000, X, Y) && !ellipse(23719.590424, 30910.174408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21500.773148, 35781.383209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26822.008087, 28826.058716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29614.844025, 24403.759613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28126.986847, 24398.024750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.885498, 28083.404541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13318.436157, 19166.674500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26268.997345, 25606.721527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16209.615707, 22877.993927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23443.634000, 26793.632000, 2431.392070, 2431.392070, 0.000000, X, Y) && !ellipse(27548.110809, 28828.952698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31229.608948, 22221.677322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29252.618378, 28928.996857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29238.297150, 32910.040710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28665.761322, 36919.984558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30135.126221, 33714.907532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30397.974121, 34926.946991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15478.127258, 20051.020950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30025.080566, 18839.962524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17023.087479, 18828.891052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14438.654083, 19647.729965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26427.202576, 27776.690247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18586.165619, 19007.605057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29674.420227, 35266.583649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22649.602997, 27095.916840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29887.536774, 34458.790985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30114.196625, 19525.110092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.436000, 27623.450000, 1175.824034, 1175.824034, 0.000000, X, Y) && !ellipse(30706.000000, 35529.420929, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:10 2013] Writing fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src83.gif