[Sat Jun  1 17:48:27 2013] Detection parameters:
  Position = (467.7, 382.9) = 8 20 53.55 -42 52 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1159.9 +/- 47.7
  Background counts = 202.1
  Rate = 0.04 +/- 0.002

[Sat Jun  1 17:49:11 2013] Off-axis axis estimate = 13.71'
[Sat Jun  1 17:53:16 2013] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:16 2013] Initial guess for spatial extent in simple fitting = 13.29"
[Sat Jun  1 17:53:16 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.970
[Sat Jun  1 17:53:16 2013] Giving source the simple spatial ID 90 for pass 0, mean size = 13.29"
[Sat Jun  1 17:53:20 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src90.ximg exists
[Sat Jun  1 17:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src90.csv
[Sat Jun  1 17:53:20 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src90_1.ximg exists
[Sat Jun  1 17:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src90.csv
[Sat Jun  1 17:53:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:22 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Sat Jun  1 17:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src90.csv
[Sat Jun  1 17:53:22 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Sat Jun  1 17:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src90.csv
[Sat Jun  1 17:53:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:54:33 2013] Warning, spatial fit 90 centroid is now closest to src. 55
[Sat Jun  1 17:54:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:54:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:54:33 2013] Assessing source extent using major
[Sat Jun  1 17:54:33 2013] Source does appear to be extended
[Sat Jun  1 17:54:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:56:56 2013] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:56:56 2013] Initial guess for spatial extent in simple fitting = 13.29"
[Sat Jun  1 17:56:56 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.970
[Sat Jun  1 17:56:56 2013] Giving source the simple spatial ID 85 for pass 1, mean size = 13.29"
[Sat Jun  1 17:56:59 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src85.ximg exists
[Sat Jun  1 17:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src85.csv
[Sat Jun  1 17:56:59 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src85_1.ximg exists
[Sat Jun  1 17:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src85.csv
[Sat Jun  1 17:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:02 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Sat Jun  1 17:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src85.csv
[Sat Jun  1 17:57:02 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Sat Jun  1 17:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src85.csv
[Sat Jun  1 17:57:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:58 2013] Warning, spatial fit 85 centroid is now closest to src. 50
[Sat Jun  1 17:57:58 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:57:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:57:58 2013] Assessing source extent using major
[Sat Jun  1 17:57:58 2013] Source does appear to be extended
[Sat Jun  1 17:57:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:52:36 2013] Counts = 1159.928467, rescaling region sizes by 2.000000
[Sun Jun  2 09:52:36 2013] XMMSAS src. selection expression = ellipse(40643.352509, 33259.713379, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:36 2013] Not overwriting source region fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src46_src.reg
[Sun Jun  2 09:52:36 2013] Extracting stamp from image fullrun_mos1_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (393, 308) - (543, 458)
[Sun Jun  2 09:52:37 2013] XMMSAS bgd. selection expression = annulus(40643.352509, 33259.713379, 4350.000000, 8700.000000, X, Y) && !ellipse(32629.980255, 26449.504822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31398.707764, 24411.472473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31927.404000, 29800.158000, 9815.952282, 9815.952282, 0.000000, X, Y) && !ellipse(31360.231079, 30139.021149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31756.740000, 31452.754000, 3093.168089, 3093.168089, 0.000000, X, Y) && !ellipse(36564.862000, 32683.438000, 1832.640053, 1832.640053, 0.000000, X, Y) && !ellipse(37124.116486, 32928.368378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34015.596054, 31885.317560, 1549.368045, 988.270258, 191.498439, X, Y) && !ellipse(31130.126000, 31784.594200, 1549.368045, 688.026420, 215.607000, X, Y) && !ellipse(34750.094000, 32034.632800, 2537.640073, 2537.640073, 0.000000, X, Y) && !ellipse(35642.206573, 32572.759064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32824.718000, 30767.186000, 1635.992047, 1635.992047, 0.000000, X, Y) && !ellipse(33830.278000, 31635.908000, 10886.160313, 10886.160313, 0.000000, X, Y) && !ellipse(39538.470032, 31353.920074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36140.324585, 32312.521057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35354.815582, 23699.390961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31387.530200, 24118.674600, 1411.040041, 1411.040041, 0.000000, X, Y) && !ellipse(32151.557251, 25460.309937, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(30563.926000, 32241.916000, 2237.392064, 734.993621, 39.424000, X, Y) && !ellipse(31398.949371, 31587.984802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35342.008000, 22481.138000, 3450.592099, 2000.168058, 53.025900, X, Y) && !ellipse(37708.525604, 32594.097534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31748.675140, 31969.735535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32573.814980, 26731.034000, 1477.616043, 1477.616043, 0.000000, X, Y) && !ellipse(31791.102509, 32749.334442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32406.694946, 31850.737122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31361.694000, 39086.345093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31980.509644, 23230.823425, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(40249.693970, 32138.993652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40962.165771, 32491.671814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34577.608856, 28584.310333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34706.245026, 23765.440125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31444.552155, 38489.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36738.890320, 23694.184448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40739.881409, 32069.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38496.219696, 31090.262390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33706.591980, 29802.854614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31284.281311, 38059.523132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38001.380646, 30924.365540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32562.664642, 37882.294617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.933685, 34214.767242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39602.727051, 25268.056610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37879.140442, 30408.172089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39405.362793, 27088.652679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37877.635040, 32073.504700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34313.911346, 34392.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40355.034912, 34964.029785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38260.869934, 30052.400818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39103.228424, 24833.555756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39031.614319, 30139.329132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38662.586487, 27709.584381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34812.966583, 34483.254425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39646.447418, 26235.809479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43274.215729, 26303.733093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38646.982880, 28385.018524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41993.392426, 30825.521454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36486.301453, 36589.943176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32739.218781, 37283.354523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36915.970154, 37008.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32864.342346, 36670.881744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39902.121429, 35185.785797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31989.823486, 39958.851440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41476.474152, 28289.156036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38332.345978, 29370.021118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33522.139130, 37109.914734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35444.675049, 36118.332977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39183.938660, 29539.733246, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:37 2013] Writing fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src46.gif