[Sat Jun  1 17:49:00 2013] Detection parameters:
  Position = (316.9, 188.0) = 8 21 53.19 -43 6 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 783.2 +/- 44.1
  Background counts = 324.5
  Rate = 0.04 +/- 0.002

[Sat Jun  1 17:49:11 2013] Off-axis axis estimate = 8.12'
[Sat Jun  1 17:53:16 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:16 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Sat Jun  1 17:53:16 2013] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.033
[Sat Jun  1 17:53:16 2013] Giving source the simple spatial ID 99 for pass 0, mean size = 10.49"
[Sat Jun  1 17:53:20 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src99.ximg exists
[Sat Jun  1 17:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src99.csv
[Sat Jun  1 17:53:20 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src99_1.ximg exists
[Sat Jun  1 17:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src99.csv
[Sat Jun  1 17:53:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:23 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Sat Jun  1 17:53:23 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Sat Jun  1 17:53:23 2013] Fit fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Sat Jun  1 17:54:33 2013] Warning, spatial fit 99 centroid is now closest to src. 358
[Sat Jun  1 17:54:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:54:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:54:33 2013] Assessing source extent using major
[Sat Jun  1 17:54:33 2013] Source does appear to be extended
[Sat Jun  1 17:54:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:54:34 2013] Source is confused with source 358
[Sat Jun  1 17:56:56 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:56:56 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Sat Jun  1 17:56:56 2013] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.033
[Sat Jun  1 17:56:56 2013] Giving source the simple spatial ID 93 for pass 1, mean size = 10.49"
[Sat Jun  1 17:56:59 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src93.ximg exists
[Sat Jun  1 17:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src93.csv
[Sat Jun  1 17:56:59 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src93_1.ximg exists
[Sat Jun  1 17:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src93.csv
[Sat Jun  1 17:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:02 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Sat Jun  1 17:57:02 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Sat Jun  1 17:57:02 2013] Fit fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src93 appears to have run properly
[Sat Jun  1 17:57:58 2013] Warning, spatial fit 93 centroid is now closest to src. 342
[Sat Jun  1 17:57:58 2013] Spatial fit model total counts = 6449.710000, observed total counts = 5537.000000
[Sat Jun  1 17:57:58 2013] Poor agreement between spatial fit and data for source 346
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 17:57:58 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:57:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:57:58 2013] Assessing source extent using major
[Sat Jun  1 17:57:58 2013] Source does appear to be extended
[Sat Jun  1 17:57:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:52:39 2013] XMMSAS src. selection expression = ellipse(27524.927094, 16308.138535, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 09:52:39 2013] Not overwriting source region fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src346_src.reg
[Sun Jun  2 09:52:39 2013] Extracting stamp from image fullrun_mos1_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (279, 151) - (354, 226)
[Sun Jun  2 09:52:39 2013] XMMSAS bgd. selection expression = annulus(27524.927094, 16308.138535, 1087.500000, 2175.000000, X, Y) && !ellipse(24061.280000, 12974.381800, 1901.512055, 1119.280032, 20.344300, X, Y) && !ellipse(26091.652000, 17458.289400, 833.824024, 833.824024, 0.000000, X, Y) && !ellipse(27682.153800, 15981.984000, 1677.984048, 1677.984048, 0.000000, X, Y) && !ellipse(26811.104000, 16968.448000, 990.136028, 990.136028, 0.000000, X, Y) && !ellipse(29056.507294, 16347.253754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.955536, 19208.025253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26009.996582, 18247.536545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.434113, 18838.583237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28298.376953, 16480.775177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28490.566559, 16989.234528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28895.007172, 15864.284012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26301.046204, 18719.718903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25155.748871, 13965.688492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27747.997345, 14870.469376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29631.504333, 17534.021317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25602.566406, 14219.873032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28400.640717, 17866.010162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25205.620941, 14653.597290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29088.285339, 18315.460159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30025.080566, 18839.962524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.767303, 18576.018097, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:39 2013] Writing fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src346.gif