[Sat Jun  1 17:48:25 2013] Detection parameters:
  Position = (315.1, 439.9) = 8 21 53.97 -42 48 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1274.3 +/- 63.4
  Background counts = 908.7
  Rate = 0.05 +/- 0.002

[Sat Jun  1 17:49:11 2013] Off-axis axis estimate = 10.33'
[Sat Jun  1 17:53:16 2013] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:16 2013] Initial guess for spatial extent in simple fitting = 11.59"
[Sat Jun  1 17:53:16 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.898
[Sat Jun  1 17:53:16 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 11.59"
[Sat Jun  1 17:53:20 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src81.ximg exists
[Sat Jun  1 17:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src81.csv
[Sat Jun  1 17:53:20 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src81_1.ximg exists
[Sat Jun  1 17:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src81.csv
[Sat Jun  1 17:53:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:22 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sat Jun  1 17:53:22 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sat Jun  1 17:53:22 2013] Fit fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Sat Jun  1 17:54:32 2013] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 15.084092 pixels away
[Sat Jun  1 17:54:32 2013] Spatial fit model total counts = 12821.900000, observed total counts = 12446.000000
[Sat Jun  1 17:54:32 2013] Offset between fit and detection position for source 23 = 2.237676 pixels
[Sat Jun  1 17:54:32 2013] Warning, changing simple spatial fit ID from 81 to 84
[Sat Jun  1 17:54:32 2013] 11762.170000 total counts/ 9450.670000 bgd. counts: snr = 23.777303
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.237676 pixels
  Position = (316.2, 438.0) = 8 21 53.51 -42 48 34.0
  Extent = 13.7 (12.4-16.7)", rotation angle = 0
  Source counts = 2311.5 +/- 108.5
  Background counts = 9450.7
  Rate = 0.09 +/- 0.004
[Sat Jun  1 17:54:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:54:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:54:33 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 17:54:33 2013] Source does appear to be extended
[Sat Jun  1 17:54:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:54:34 2013] Source is confused with source 25
[Sat Jun  1 17:56:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:56:56 2013] Initial guess for spatial extent in simple fitting = 13.66"
[Sat Jun  1 17:56:56 2013] source mask rpix=3.1, npix_max = 52, mask sum = 54, frac = 1.019
[Sat Jun  1 17:56:56 2013] Giving source the simple spatial ID 76 for pass 1, mean size = 13.66"
[Sat Jun  1 17:56:58 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src76.ximg exists
[Sat Jun  1 17:56:58 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src76_1.ximg exists
[Sat Jun  1 17:56:58 2013] Fit fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src76 appears to have run properly
[Sat Jun  1 17:57:01 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Sat Jun  1 17:57:01 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Sat Jun  1 17:57:01 2013] Fit fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Sat Jun  1 17:57:57 2013] Warning, spatial fit 76 centroid is now closest to src. 180
[Sat Jun  1 17:57:58 2013] Spatial fit model total counts = 12824.100000, observed total counts = 12446.000000
[Sat Jun  1 17:57:58 2013] Offset between fit and detection position for source 23 = 1.569344 pixels
[Sat Jun  1 17:57:58 2013] Warning, changing simple spatial fit ID from 76 to 79
[Sat Jun  1 17:57:58 2013] 11534.360000 total counts/ 9145.530000 bgd. counts: snr = 24.979331
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.569344 pixels
  Position = (315.4, 439.3) = 8 21 53.85 -42 48 28.3
  Extent = 14.6 (13.3-16.8)", rotation angle = 0
  Source counts = 2388.8 +/- 107.4
  Background counts = 9145.5
  Rate = 0.09 +/- 0.004
[Sat Jun  1 17:57:58 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:57:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:57:58 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 17:57:58 2013] Source does appear to be extended
[Sat Jun  1 17:57:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:52:33 2013] Counts = 2388.830000, rescaling region sizes by 2.000000
[Sun Jun  2 09:52:33 2013] XMMSAS src. selection expression = ellipse(27387.850000, 38173.150000, 1753.860050, 1753.860050, 0.000000, X, Y)
[Sun Jun  2 09:52:33 2013] Not overwriting source region fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src23_src.reg
[Sun Jun  2 09:52:33 2013] Extracting stamp from image fullrun_mos1_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (215, 339) - (416, 540)
[Sun Jun  2 09:52:34 2013] XMMSAS bgd. selection expression = annulus(27387.850000, 38173.150000, 5846.200168, 11692.400336, X, Y) && !ellipse(32629.980255, 26449.504822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26838.668600, 33433.201000, 1533.784044, 1533.784044, 0.000000, X, Y) && !ellipse(10876.376000, 21199.790000, 6086.952175, 6086.952175, -0.000000, X, Y) && !ellipse(18914.650000, 24901.982000, 1580.808045, 1580.808045, 0.000000, X, Y) && !ellipse(31927.404000, 29800.158000, 9815.952282, 9815.952282, 0.000000, X, Y) && !ellipse(31360.231079, 30139.021149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.016000, 22732.206000, 5949.192171, 5394.120155, 86.584000, X, Y) && !ellipse(21123.800140, 27511.800629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.154000, 36739.288000, 865.440025, 865.440025, 0.000000, X, Y) && !ellipse(22615.284000, 29141.398000, 750.896022, 750.896022, 0.000000, X, Y) && !ellipse(19990.357513, 37349.318726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.360000, 26375.282000, 655.304819, 655.304819, 0.000000, X, Y) && !ellipse(21826.364700, 28395.681122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.324219, 34425.204865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31756.740000, 31452.754000, 3093.168089, 3093.168089, 0.000000, X, Y) && !ellipse(36564.862000, 32683.438000, 1832.640053, 1832.640053, 0.000000, X, Y) && !ellipse(25587.666000, 40916.112000, 2006.552058, 2006.552058, 0.000000, X, Y) && !ellipse(25454.837921, 33532.822968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27942.294000, 34083.878000, 870.304025, 870.304025, 0.000000, X, Y) && !ellipse(37124.116486, 32928.368378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23341.936401, 29970.655121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34015.596054, 31885.317560, 1549.368045, 988.270258, 191.498439, X, Y) && !ellipse(31130.126000, 31784.594200, 1549.368045, 688.026420, 215.607000, X, Y) && !ellipse(22816.389200, 27972.970000, 1215.696035, 1215.696035, 0.000000, X, Y) && !ellipse(34750.094000, 32034.632800, 2537.640073, 2537.640073, 0.000000, X, Y) && !ellipse(21392.047043, 27008.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20853.828657, 25550.160174, 1353.040039, 578.108521, 306.734018, X, Y) && !ellipse(19969.504000, 25740.568000, 815.864023, 815.864023, 0.000000, X, Y) && !ellipse(26928.620789, 26024.936432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35642.206573, 32572.759064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23925.372000, 29892.290000, 1315.744038, 1315.744038, 0.000000, X, Y) && !ellipse(26710.856600, 26871.216600, 1010.904029, 1010.904029, 0.000000, X, Y) && !ellipse(27340.360000, 36378.722000, 2520.496073, 2520.496073, 0.000000, X, Y) && !ellipse(23307.474121, 29343.842529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.939423, 40585.130371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.676208, 28102.127808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31031.416321, 30857.596863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32824.718000, 30767.186000, 1635.992047, 1635.992047, 0.000000, X, Y) && !ellipse(33830.278000, 31635.908000, 10886.160313, 10886.160313, 0.000000, X, Y) && !ellipse(21052.847137, 26120.716614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20845.670800, 25190.440000, 1368.232039, 1368.232039, 0.000000, X, Y) && !ellipse(28252.537872, 34489.520294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39538.470032, 31353.920074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36140.324585, 32312.521057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27708.057739, 37630.887238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27496.563416, 26008.982361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32151.557251, 25460.309937, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26579.755249, 35091.943787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30563.926000, 32241.916000, 2237.392064, 734.993621, 39.424000, X, Y) && !ellipse(24043.148224, 31613.438568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31398.949371, 31587.984802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37708.525604, 32594.097534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31748.675140, 31969.735535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32573.814980, 26731.034000, 1477.616043, 1477.616043, 0.000000, X, Y) && !ellipse(28653.789795, 29802.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27174.546000, 25503.248000, 1096.504032, 1096.504032, 0.000000, X, Y) && !ellipse(24168.115143, 40779.316559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24135.970703, 39337.696716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21891.407608, 37187.101746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31791.102509, 32749.334442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32406.694946, 31850.737122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31361.694000, 39086.345093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22676.474548, 36315.906982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21906.757660, 39953.809540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31033.304047, 31409.325226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21864.054169, 26040.855988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23582.418335, 39890.622498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.134000, 35541.812000, 972.000028, 972.000028, 0.000000, X, Y) && !ellipse(23745.251282, 30415.930084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34577.608856, 28584.310333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29449.318878, 32429.698120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.572540, 33795.025696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25762.866455, 39547.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28897.765747, 29450.755249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.658722, 39460.983002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22778.892303, 40535.436188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.674194, 32561.669006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26937.576202, 38994.919159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23719.590424, 30910.174408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21500.773148, 35781.383209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26822.008087, 28826.058716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31444.552155, 38489.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22217.540787, 37972.204529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.885498, 28083.404541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38496.219696, 31090.262390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33706.591980, 29802.854614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23443.634000, 26793.632000, 2431.392070, 2431.392070, 0.000000, X, Y) && !ellipse(31284.281311, 38059.523132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27548.110809, 28828.952698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38001.380646, 30924.365540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29252.618378, 28928.996857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29238.297150, 32910.040710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30706.005310, 39363.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32562.664642, 37882.294617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.933685, 34214.767242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28665.761322, 36919.984558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30135.126221, 33714.907532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30397.974121, 34926.946991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37879.140442, 30408.172089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39405.362793, 27088.652679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37877.635040, 32073.504700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22186.857941, 40320.737244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22159.467331, 39198.772308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34313.911346, 34392.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26427.202576, 27776.690247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38260.869934, 30052.400818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29980.895569, 40130.122070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39031.614319, 30139.329132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38662.586487, 27709.584381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29674.420227, 35266.583649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30554.867767, 39705.643951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34812.966583, 34483.254425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22649.602997, 27095.916840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29887.536774, 34458.790985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39646.447418, 26235.809479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38646.982880, 28385.018524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36486.301453, 36589.943176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32739.218781, 37283.354523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.946747, 39097.963501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36915.970154, 37008.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32864.342346, 36670.881744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39902.121429, 35185.785797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29717.482147, 39261.168152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.436000, 27623.450000, 1175.824034, 1175.824034, 0.000000, X, Y) && !ellipse(31989.823486, 39958.851440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27266.343170, 40683.098297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38332.345978, 29370.021118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33522.139130, 37109.914734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30706.000000, 35529.420929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35444.675049, 36118.332977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39183.938660, 29539.733246, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:34 2013] Writing fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src23.gif